Abstract:Recent years have seen an increased interest toward utilizing biobased and biodegradable materials for barrier packaging applications. Most of the abovementioned materials usually have certain shortcomings that discourage their adoption as a preferred material of choice. Nanocellulose falls into such a category. It has excellent barrier against grease, mineral oils, and oxygen but poor tolerance against water vapor, which makes it unsuitable to be used at high humidity. In addition, nanocellulose suspensions' high viscosity and yield stress already at low solid content and poor adhesion to substrates create additional challenges for high-speed processing. Polylactic acid (PLA) is another potential candidate that has reasonably high tolerance against water vapor but rather a poor barrier against oxygen. The current work explores the possibility of combining both these materials into thin multilayer coatings onto a paperboard. A custom-built slot-die was used to coat either microfibrillated cellulose or cellulose nanocrystals onto a pigment-coated baseboard in a continuous process. These were subsequently coated with PLA using a pilot-scale extrusion coater. Low-density polyethylene was used as for reference extrusion coating. Cationic starch precoating and corona treatment improved the adhesion at nanocellulose/baseboard and nanocellulose/PLA interfaces, respectively. The water vapor transmission rate for nanocellulose + PLA coatings remained lower than that of the control PLA coating, even at a high relative humidity of 90% (38 °C). The multilayer coating had 98% lower oxygen transmission rate compared to just the PLA-coated baseboard, and the heptane vapor transmission rate reduced by 99% in comparison to the baseboard. The grease barrier for nanocellulose + PLA coatings increased 5-fold compared to nanocellulose alone and 2-fold compared to PLA alone. This approach of processing nanocellulose and PLA into multiple layers utilizing slot-die and extrusion coating in tandem has the potential to produce a barrier packaging paper that is both 100% biobased and biodegradable.

Improving Recycling of Polyethylene-Coated Paperboard with a Nanofibrillated Cellulose Layer

Enhancing Insulating Performances of Presspaper by Introduction of Nanofibrillated Cellulose

Enhancing mechanical strength and breakdown behavior of insulating presspaper by introduction of nanofibrillated cellulose

Tailoring nanofibrillated cellulose through sonication and its potential use in molded pulp packaging

High‐efficiency modification of PET by the low addition of a self‐assembled functional nanocellulose film prepared from waste paper

Enhancement of Mechanical and Electrical Performances of Insulating Presspaper by Introduction of Nanocellulose

Grafting nanocellulose with diethylenetriaminepentaacetic acid and chitosan as additive for enhancing recycled OCC pulp fibres

Continuous Processing of Nanocellulose and Polylactic Acid into Multilayer Barrier Coatings

Binary additives of polyamide epichlorohydrin-nanocellulose for effective valorization of used paper

Evaluating paper’s optical properties after separate and combined use of nanofibrillated cellulose with cationic starch and cationic polyacrylamide

Cellulose nanocrystals obtained from office waste paper and their potential application in PET packing materials.

Improving Hydrophobicity and Water Vapor Barrier Properties in Paper Using Cellulose Nanofiber-Stabilized Cocoa Butter and PLA Emulsions

Multilayer surface construction for enhancing barrier properties of cellulose-based packaging

Enhancing barrier and mechanical properties of paper through NMMO/cellulose solution coating

Effect of Nanocellulose on the Properties of Cottonseed Protein Isolate as a Paper Strength Agent

Cellulose nanofibrils (CNFs) produced by different mechanical methods to improve mechanical properties of recycled paper

Paper Coatings Based on Polyvinyl Alcohol and Cellulose Nanocrystals Using Various Coating Techniques and Determination of Their Barrier Properties

Towards a new generation of functional fiber-based packaging: cellulose nanofibers for improved barrier, mechanical and surface properties

Potential use of nanofibrillated cellulose-loaded cationic starch solutions as coating formulation for recycled fluting papers

High-performance homogenized and spray coated nanofibrillated cellulose-montmorillonite barriers

Transparent Cellulose-Based Films Prepared from Used Disposable Paper Cups via an Ionic Liquid