Abstract:Passive solar desalination is an emerging low-cost technology for fresh water production. State of the art desalinators typically evaporate water using wicking structures to achieve high solar-to-vapor efficiency by minimizing heat loss. However, wicking structures cannot reject salt continuously which limits the operating duration of the desalinators to several hours before the devices are turned off to reject salt. While significant research has focused on developing efficient evaporators to achieve high solar-to-vapor efficiency, inefficient condensers have become the bottleneck for the overall solar-to-water efficiency. To overcome these challenges, we designed a passive inverted single stage solar membrane desalinator that achieves continuous desalination and salt rejection. By flowing salt water on a radiative absorbing, porous, hydrophobic evaporator membrane using gravity, salt continuously diffuses away from the membrane while allowing heated water vapor to transport to and condense on a cooler microporous membrane below. Our design utilizes thin-film condensation on a microporous membrane which offers ample three-phase contact region to enhance condensation phase change heat transfer. By condensing within the microporous membrane, we reduce the gap distance between the condenser and evaporator membranes, which reduces the vapor transport resistance. We experimentally demonstrated a record-high continuous desalination and salt rejection test duration of 7 days under one-sun. Despite an increased convection heat loss necessary for salt rejection on the evaporator, our desalinator still achieved a water-collection rate of 0.487 $kg$ $m^{-2}h^{-1}$, which corresponds to a 32.2% solar-to-water efficiency. This work signifies an improvement in the robustness of current state of the art desalinators and presents a new architecture to further optimize passive solar desalinators.

Passive solar desalination towards high efficiency and salt rejection via a reverse-evaporating water layer of millimetre-scale thickness

Salt-rejecting continuous passive solar thermal desalination via convective flow and thin-film condensation

A Salt-Rejecting Solar Evaporator for Continuous Steam Generation

Salt rejection/discharge strategies of a reverse-distillation device with a water layer for sustainable solar desalination: From two dimensions to three dimensions

High performance reverse solar distiller with enhanced condensation and salt resistance

Passive solar high-yield seawater desalination by modular and low-cost distillation

A small heat capacity solar distiller with extra effective discharge for brine by the siphoning of a hydrophilic membranous wick

Highly efficient three-dimensional solar evaporator for high salinity desalination by localized crystallization

Solar-driven interfacial desalination for simultaneous freshwater and salt generation

A High‐Performance Self‐Regenerating Solar Evaporator for Continuous Water Desalination

Three-dimensional open architecture enabling salt-rejection solar evaporators with boosted water production efficiency

Solar Evaporator with Controlled Salt Precipitation for Zero Liquid Discharge Desalination

Optimized Water Supply in a Solar Evaporator for Simultaneous Freshwater Production and Salt Recycle.

Passive high-yield seawater desalination at below one sun by modular and low-cost distillation

An integrated solar evaporator with multilevel hierarchy and multifunctional properties for efficient and salt fouling-resistant desalination

Design of bifunctional Janus structure for high efficiency solar distillation in hypersaline brine

Ultrahigh-efficiency desalination via a thermally-localized multistage solar still

Isolating solar harvesting and water evaporation of salt-free Janus steam generator for concentration-independent seawater desalination

Conical solar-thermo-radiative evaporator for sustainable desalination and salt recovery