Abstract:Titanium nanotubes (TNT) is commonly synthesized from TiO2 P25 under hydrothermal reaction (HTR) using 10 M NaOH). Composite adsorbents derived from TiO2 and carbon spheres (CS) via a facile two-stage HTR process were investigated. CS was firstly synthesized from glucose through HTR. The mixture (CS, TiO2, and NaOH) was then transferred to a Teflon-lined autoclave for another HTC process to generate TNT/CS. The TNT/CS composite was calcined from 300 to 800 °C to evaluate the changes in its surface properties (functional group, morphology, and external charge), textural parameters, crystallinity, cation exchange capacity, and adsorption capacity. Results indicated that the Brunauer–Emmett–Teller surface area and total pore volume of composites were 25.0–131.9 m2/g and 0.099–0.33 cm3/g, respectively. The composites exhibited a negatively charged surface within pH 4.0–9.0, with their zeta potentials at pH 5.0 ranging from −54.60 to −31.1 mV. The result of X-ray photoelectron spectroscopy demonstrated that the main components (%atomic) in the composites were carbon (29.07 %–60.75 %), oxygen (29.09 %–49.16 %), titanium (2.93 %–17.52 %), and sodium (0.56 %–9.48 %). During the preparation of TNT/CS, CS (its negatively charged surface) can well absorb Na+ ions in the mixture. This phenomenon prevented the performance of tubular morphology from TNT/CS. The synthesized composites were regarded as multifunctional adsorbents for adsorbing various contaminants (Pb2+, Cd2+, Cu2+, cationic methylene blue dye, phenol, and toluene) in water. Equilibrium adsorption at pH 5.0 was carried out to estimate their adsorption capacities toward the selected contaminants. The Langmuir maximum adsorption capacities of Pb, Cd, Cu, phenol, methylene blue, and toluene were 534, 518, 514.2, 690, 329, 138 mg/g for TNT/CS and 334–523, 384–477, 297–453, 394–677, 303–416, 118–260 mg/g for the calcinated TNT/CS composites, and 26.3, 23.8, 21.4, 285, 239, 188 mg/g for commercial activated carbon, respectively. The adsorption mechanisms were elucidated based on the adsorption experiments and surface characteristics of TNT/CS. Ion exchange was the primary adsorption mechanism for the test cationic contaminants. The van der Waals force was an important adsorption mechanism for phenol and toluene. The developed TNT/CS composite can be employed as an effective adsorbent for adsorbing cationic and non-ionic contaminants from aqueous solutions.

A high‐temperature resistant benzimidazole‐based porous polymer for efficient adsorption of trinitrotoluene in aqueous solution

Synthesis and CO2 Capture Behavior of Porous Cross-Linked Polymers Containing Pendant Triazole Groups

Two-dimensional molecular imprinting approach for the electrochemical detection of trinitrotoluene

Hydrophobic porous polymer containing isoxazoline and siloxane groups for 2,4,6-trinitrotoluene (TNT) adsorption via synergistic effect of Lewis acid-base, dipole-π, and π-π interactions

Molecular Modification of a Novel Macroporous Silica-Based Impregnated Polymeric Composite by Tri-N-butyl Phosphate and Its Application in the Adsorption for Some Metals Contained in a Typical Simulated HLLW.

A simple approach to prepare isoxazoline-based porous polymer for the highly effective adsorption of 2,4,6-trinitrotoluene (TNT): Catalyst-free click polymerization between an in situ generated nitrile oxide with polybutadiene

Highly Selective Adsorption of New Bis-Opened-Triazine Materials Hybridized with a Cross-Linked Polymer Support for Palladium and Some Typical Coexisting Metals

Nitrogen-rich triazine-based porous polymers for efficient removal of bisphenol micropollutants

Preparation and study of straw porous biochar with aromatic ring structure for adsorption performance and mechanism toward TNT red water

Adsorption of 2,4,6-Trinitrotoluene on Carboxylated Porous Polystyrene Microspheres

Adsorption characteristics of lead, copper, cadmium, methylene blue, phenol, and toluene in water using composite synthesized from titanium dioxides and carbon spheres through hydrothermal method

Preparation of hypercrosslinked polymer with benzotriazole and its derivatives as monomers and high-efficiency adsorption of tetracycline

Highly Thermally Stable and Gas Selective Hexaphenylbenzene Tröger's Base Microporous Polymers

Monodisperse amino-modified nanosized zero-valent iron for selective and recyclable removal of TNT: Synthesis, characterization, and removal mechanism

A novel nitrogen-containing covalent organic framework adsorbent for the efficient removal of bisphenol A from aqueous solution

Facile synthesis of poly(tannic acid-1,4-butanediamine) microsphere based on the "self-assembly to polymerization" mechanism and its fast removal feature toward Cr(VI) ions

Efficient removal of tetrabromobisphenol A using microporous and mesoporous carbons: The role of pore structure

Sequestration of p-nitrophenol from liquid phase by poly(acrylonitrile-co-acrylic acid) containing thioamide group

Ionization of Tröger's Base Polymer of Intrinsic Microporosity for High-Performance Membrane-Mediated Helium Recovery

Investigation of organic matter adsorption from TNT red water by modified bamboo charcoal

Hierarchically porous covalent organic framework for adsorption and removal of triphenylmethane dyes