Abstract:High consumption of acids and reductants is usually required when spent lithium-ion batteries are recycled using a hydrometallurgy route. The overstoichiometric chemicals end up as pollutants that have to be further treated. Low chemical and energy consumption have attracted considerable attention to achieve sustainability of a recycling process. In this research, LiFePO4 was used as a reductant and induced crystallization was performed for the removal of Fe and P. More importantly, we demonstrate that it is possible to achieve additional reductant-free and near-to-stoichiometric acidic recovery of spent ternary lithium-ion batteries (NCMs) by introducing FePO4·2H2O seed crystals and using waste LiFePO4. High efficiencies (>96%) of critical metals including Ni, Co, Mn, and Li are achieved, while iron phosphate remains as a solid product. Then, the leaching solution can be further used for the Ni–Co–Mn hydroxide precursor and lithium carbonate preparation. In addition, the mechanisms were subsequently investigated by combining thermodynamics analysis and systematic characterizations. This entire recycling process can be a highly economic, closed-loop alternative for recovering valuable metals from spent lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08163?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08163</a>.Detailed results of different parameters on synergistic leaching; reuse of leaching residues as seed crystals; leaching efficiencies of different types of NCM cathode wastes; SEM micrographs of the Ni–Co–Mn hydroxide precursor and leaching residues at different times (0.5–4 h); mass fraction of Li2CO3 precipitation and FePO4·2(H2O) residues; and thermodynamic data and equilibrium equations relative to the E–pH diagram of the Li–Fe–P–H2O system (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08163/suppl_file/sc0c08163_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In Situ Recombination Of Elements In Spent Lithium-Ion Batteries To Recover High-Value Gamma-Lialo2 And Lial5o8

In Situ Recombination of Elements in Spent Lithium-Ion Batteries to Recover High-Value γ-LiAlO2 and LiAl5O8

Surplus energy utilization of spent lithium-ion batteries for high-profit organolithiums

Recovery of Lithium and Heavy Non-Ferrous Metals from Spent Lithium-Ion Batteries

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Recycling Metals from Lithium Ion Battery by Mechanical Separation and Vacuum Metallurgy.

Recovery Value Metals from Mixed Spent Li-Ion Batteries

Recover value metals from spent lithium-ion batteries via a combination of in-situ reduction pretreatment and facile acid leaching

Short-term and High-performance Recycling of Cathode Material from Spent Lithium Ion Batteries

Selective Recovery of Valuable Metals from Spent Lithium-Ion Batteries – Process Development and Kinetics Evaluation

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

Novel Approach for in Situ Recovery of Lithium Carbonate from Spent Lithium Ion Batteries Using Vacuum Metallurgy.

Repair and Reuse of Spent Lithium Battery Electrode Materials

A Technology of Recovery of Spent Lithium-Ion Secondary Battery Positive Electrode Materials

Two Targets, One Strike: Efficient Recovery of Lithium and Simultaneous Removal of Impurities from Spent LFP Batteries Via Ferric Ions Assisted Air Oxidation Method

Highly selective metal recovery from spent lithium-ion batteries through stoichiometric hydrogen ion replacement

Pre-separation combined with reduction roasting for high-quality recovery of graphite and lithium from spent lithium ion batteries

Novel approach to recycling of valuable metals from spent lithium-ion batteries using hydrometallurgy, focused on preferential extraction of lithium

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

Recycling of valuable metals from spent cathode material by organic pyrolysis combined with in-situ thermal reduction

Efficient separation and recovery of lithium through volatilization in the recycling process of spent lithium-ion batteries