Abstract:Solar steam generation (STG) has been regarded as a promising strategy to relieve concerns on water shortage. Though great progresses have been made to improve the efficiency, salt deposition in the STG evaporator presents vital issues to an effective and continuous water production. Here, A MoS2-sodium alginate hydrogel wrapped melamine foam (MoS2/) hybrid sponge is developed through simple, scalable and low-cost dipping–drying–crosslinking process. In this work, a 4 × 4 cm MoS2/ evaporator shows an evaporation rate of 1.92 kg/m2.h in 3.5 wt% NaCl solution under 1 kW.m−2, achieving a solar-thermal conversion efficiency of 90%. Additional to bimodal porous structure of the MF skeleton, thanks to meticulous designs, including drilling through-holes and cutting water-channels on the STG evaporator, the water transportation and salt ions convection are fully accelerated. It is systematically illustrated that a significant improvement in salt rejecting performance is achieved with a 1.81 kg/m2.h evaporation rate even after 100 h in a brine salinity up to 20 wt% under 1 kW.m−2. In addition, a consistent and effective solar-thermal conversion efficiency of 84.8% is also achieved superior to most reported works. Furthermore, this work also reveals that, in case of putting the evaporator float on the brine solution, Marangoni effect stemming from the temperature gradient and salinity concentration gradient at saltwater-air interface, plays an important role in salt deposition in the edge of PS foam and the side of MoS2/ hybrid sponge. The study also provides an effective strategy of isolating the evaporator from brine water to prevent Marangoni flow and enable its sustainable and practical applications.

Hydrothermal Molten Salt: A Hydrothermal Fluid in SCWO Treatment of Hypersaline Wastewater

Inorganic salts in sub-/supercritical water—Part A: Behavior characteristics and mechanisms

Characteristics, mechanisms and measurement methods of dissolution and deposition of inorganic salts in sub-/supercritical water

Salt Deposition Problems in Supercritical Water Oxidation

Experimental and Molecular Dynamics Simulation Study on Solubility Characteristics of Chloride and Sulfate Salts in Supercritical Water

Distribution characteristics of salt crystals in a supercritical water fluidized bed reactor with CFD-PBM coupled model

Molecular Dynamics Simulations on Salt Deposition and Nucleation in Supercritical Water

Advance of SCWO in solving corrosion and salt-plugging

Supercritical Water Oxidation of Glyphosate Wastewater

Inorganic Salts Crystallization and Deposition Characteristics and Mechanisms in Supercritical Water

Macro-characteristics and micro-mechanisms of Na2SO4 precipitation dissolved by KNO3 molten salt in a continuous supercritical water system

Precipitation of Sodium Sulfate and Sodium Carbonate During Supercritical Water Oxidation/gasification of Ethanol

High-efficiency catalytic wet air oxidation of high salinity phenolic wastewater under atmospheric pressure in molten salt hydrate media

Polyhydroxy cationic viscoelastic surfactant for clean fracturing fluids: Study on the salt tolerance and the effect of salt on the high temperature stability of wormlike micelles

Current research status of salt deposition in supercritical water oxidation

A scalable, cost-effective and salt-rejecting MoS2/SA@melamine foam for continuous solar steam generation

Characteristics of Sodium Sulfate Deposition in Hydrogen Production from Supercritical Water Gasification: A Review

Exploring Detailed Microcosmic Mechanisms of Sodium Chloride Deposition in Supercritical Water Reactors from the Aspect of Solvation Structure: A Combination of MD and QM Simulations

Supercritical Water Oxidation of a Pesticide Wastewater

Marangoni-driven biomimetic salt secretion evaporator

Precipitation Behavior of Salts in Supercritical Water: Experiments and Molecular Dynamics Simulations