Abstract:Granular damping, which possesses promising features for vibration suppression in harsh environment, has been studied using empirical analysis and more recently using the discrete element method (DEM). The mechanism of granular damping is highly nonlinear, and, when numerical analyses are performed, usually a relatively long simulation time of structural vibration is needed to reflect the damping behavior especially at low frequency range. The present research explores the granular damping analysis by means of the Direct Simulation Monte Carlo (DSMC) approach. Unlike the DEM that tracks the motion of granules using the direct numerical integration of Newton's equations, the DSMC is a statistical approach derived from the Boltzmann equation to describe the velocity evolution of the granular system. Since the exact time and locations of contacts among granules are not calculated in the DSMC, a significant reduction in computational time/cost can be achieved. While the DSMC has been exercised in a variety of granular systems, its implementation to granular damping analysis poses unique challenges. In this research, we develop a new method that enables the coupled analysis of the stochastic granular motion and the structural vibration. The complicated energy transfer and dissipation due to the collisions between the granules and the host structure and among the granules is directly and accurately incorporated into the analysis, which is essential to damping evaluation. Also, the effects of granular packing ratio and the excluded volume of granules, which may not be included in conventional DSMC method, are explicitly taken into account in the proposed approach. A series of numerical analyses are performed to highlight the accuracy and efficiency of the new approach. Using this new algorithm, we can carry out parametric analysis on granular damping to obtain guidelines for system optimization.

Improvement of the Coarse-Grained Discrete Element Method for Frictional Particles

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

A Model to Improve Granular Temperature in CFD-DEM Simulations

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Development of a Collisional Dissipation Rate Model for Frictional Cylinders

Using the discrete element method to develop collisional dissipation rate models that incorporate particle shape

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

Discrete Element Method Simulation on the Immigration of Granular Matter in a Vertically Vibrating U-Tube

Computational Granular Dynamics Simulation of Unsteady Movement in Particle Moving Bed

Investigation of Modeling Non-Spherical Particles by Using Spherical Discrete Element Model with Rolling Friction

Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Interface Velocity Correction for Improving Resolved CFD-DEM Simulation of Two-Phase Flow in Densely Packed Granular Media

Discrete Element Method Simulations for Complex Granular Flows

Granular Damping Analysis Using a Direct Simulation Monte Carlo Approach

An augmented coarse-grained CFD-DEM approach for simulation of fluidized beds

A new method for DEM simulation of dust-bearing granular flow – Modeling the effect of dust on the change in granule friction coefficient

Dem Simulation of Wet Granular-Fluid Flows in Spouted Beds: Numerical Studies and Experimental Verifications

Verification of coarse-grained CFD-DEM method in multiple flow regimes