Abstract:Formaldehyde (HCHO) sensing plays a critical role for indoor environment monitoring in smart home systems. Inspired by the unique hierarchical structure of cactus, we have prepared a ZnO/ANS-rGO composite for room-temperature (RT) HCHO sensing, through assembling hollow cactus-like ZnO nanorods with 5-aminonaphthalene-1-sulfonic acid (ANS)-modified graphene nanosheets in a facile and template-free manner. Interestingly, it was found that the ZnO morphology could be simply tuned from flower clusters to hollow cactus-like nanostructures, along with the increase of the reaction time during the assembly process. The ZnO/ANS-rGO-based sensors exhibited superior RT HCHO-sensing performance with an ultrahigh response (68%, 5 ppm), good repeatability, long-term stability, and an outstanding practical limit of detection (LOD: 0.25 ppm) toward HCHO, which is the lowest practical LOD reported so far. Furthermore, for the first time, a 30 m3 simulation test cabinet was adapted to evaluate the practical gas-sensing performance in an indoor environment. As a result, an instantaneous response of 5% to 0.4 ppm HCHO was successfully achieved in the simulation test. The corresponding sensing mechanism was interpreted from two aspects including high charge transport capability of ANS-rGO and the distinct gas adsorbability derived from nanostructures, respectively. The combination of a biomimetic hierarchical structure and supramolecular assembly provides a promising strategy to design HCHO-sensing materials with high practicability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c20680.The measurement of sensing layer thicknesses; morphological images of the sensing layer and digital photos of the gas sensor before and after the sensing test. SEM images of ZnO/ANS-rGO prepared at different reaction temperatures and with different ε-Zn(OH)2 amounts; nanorod diameters in different concentrations of ε-Zn(OH)2; gas-sensing properties under different conditions including reaction temperature, reaction time, concentration of ε-Zn(OH)2, and mass ratios (%) of ANS/rGO in materials; measurement of the BET surface area; a schematic diagram of a 30 m3 test cabinet; and gas response of the hollow cactus-like ZnO/ANS-rGO-based sensor toward 0.4 ppm HCHO (PDF)This article has not yet been cited by other publications.

MXene/Co3O4 Composite Based Formaldehyde Sensor Driven by ZnO/MXene Nanowire Arrays Piezoelectric Nanogenerator

MXene/NiO Composites for Chemiresistive-Type Room Temperature Formaldehyde Sensor

Synergistic Effect of ZIF-8 and Pt-Functionalized NiO/In2O3 Hollow Nanofibers for Highly Sensitive Detection of Formaldehyde

Enhanced gas sensing properties for formaldehyde based on ZnO/Zn2SnO4 composites from one-step hydrothermal synthesis

A wind-driven triboelectric nanogenerator for formaldehyde gas monitoring

A high-response formaldehyde sensor based on fibrous Ag-ZnO/In2O3 with multi-level heterojunctions

Pd Nanoclusters-Sensitized MIL-125/TiO2 Nanochannel Arrays for Sensitive and Humidity-Resistant Formaldehyde Detection at Room Temperature

Nanocomposites of pre-oxidized Ti3C2Tx MXene and SnO2 nanosheets for highly sensitive and stable formaldehyde gas sensor

A p-n Heterojunction Based Pd/PdO@ZnO Organic Frameworks for High-Sensitivity Room-Temperature Formaldehyde Gas Sensor

Ultra-fast and highly selective room-temperature formaldehyde gas sensing of Pt-decorated MoO3 nanobelts

SnO2 mesoporous nanoparticle-based gas sensor for highly sensitive and low concentration formaldehyde detection

Nanoheterostructure Construction and DFT Study of Ni-Doped In2O3 Nanocubes/WS2 Hexagon Nanosheets for Formaldehyde Sensing at Room Temperature

Pulsed Airstream-Driven Hierarchical Micro-Nano Pore Structured Triboelectric Nanogenerator for Wireless Self-Powered Formaldehyde Sensing

Au-Functionalized MoO 3 Nanoribbons towards Rapid and Selective Formaldehyde Gas Sensing at Room Temperature

High response to formaldehyde gas and ppb-level detectability of nanoparticle Cr2O3/ porous cubic ZnSnO3 composites p-n heterojunction gas sensor

Fabrication of novel Ag-doped ZnO/CdO heterostructure for high-sensitive detection of formaldehyde at low temperature

Ti3C2Tx/SnO2 P–N heterostructure construction boosts room-temperature detecting formaldehyde

ZIF-L(Co) derived cobalt doped In 2 O 3 hollow nanofibers with high surface activity for efficient formaldehyde gas sensing

Assembling Hollow Cactus-Like ZnO Nanorods with Dipole-Modified Graphene Nanosheets for Practical Room-Temperature Formaldehyde Sensing

Facile synthesis of CaFe2O4 nanocubes for formaldehyde sensor

Design of a SnO2/Zeolite Gas Sensor to Enhance Formaldehyde Sensing Properties: From the Strategy of the Band Gap-Tunable Zeolite.