Abstract:Li-rich layer-structured oxides are considered promising cathode materials for their specific capacities above 250 mAh·g–1. However, the drawbacks such as poor rate performance, fast capacity fading, and the continuous transition metal (TM) migration into the Li layer hinder their commercial applications. To address these issues, surface doping of Ti and Zr was conducted to the Li- and Mn-rich layered oxide (LMR), Li1.2Mn0.54Ni0.13Co0.13O2. The drop of the average discharge potentials of the Ti- and Zr-doped LMR was reduced by 593 and 346 mV in 100 cycles, respectively. With aberration-corrected scanning transmission electron microscopy and electron energy loss spectroscopy, we clarified that Ti4+ and Zr4+ ions are located near the surface of the material, anchor the surface oxygen, and stabilize the LMR structure. The difference in the strengths of the Ti–O and Zr–O bonds and the doping-resultant electronic structures were determined with density functional theory (DFT) calculations and soft X-ray absorption spectroscopy (SXAS), responsible for the electrochemical performance of surface-doped materials. These findings verify our modification strategies to enhance the cycling performances of the promising LMR cathode materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00155.XRD patterns of LMR, LMR-Ti, and LMR-Zr; EELS profiles of LMR-Ti; EDS mapping; HAADF image of LMR-Zr; PDOS of Li2MnO3-Ti and Li2MnO3-Zr; COOP of Li2MnO3, Li2MnO3-Ti, and Li2MnO3-Zr; O K-edge SXAS; in situ DEMS signals; and formation energy of the TM ion substitution (PDF)This article has not yet been cited by other publications.

Doping Kinetics and Structural Studies for Lithium-rich Mn-based Lithium Ion Cathode Materials

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Multivalent Li-Site Doping of Mn Oxides for Li-Ion Batteries

First Principles Study of Li-Site Doping Effect on the Properties of LiMnO2 and Li2MnO3 Cathode Materials

Feasibility to Improve the Stability of Lithium-Rich Layered Oxides by Surface Doping

Enhancement of La-Ti Modification on the Conductivity and Stability of Co-free Li- and Mn-rich Layered Cathode

Synthesis and Characterization of M-doped Li1.05Co0.3Ni0.35Mn0.3O2 (M=Zn, Fe, Ti, Zr) Cathode Materials for Lithium ion Battery

Research Progress on Lithium-Rich Manganese-Based Lithium-Ion Batteries Cathodes

Synthesis and electrochemical properties of S-M (M=Cu, Co, Ti) co-doped layered LiMnO2 cathode materials

Regulating Electronic Structure of Anionic Oxygen by Ti4+ Doping to Stabilize Layered Li-rich Oxide Cathodes for Li-ion Batteries

Cation and anion Co-doping synergy to improve structural stability of Li-and Mn-rich layered cathode materials for lithium-ion batteries

Understanding the different effects of 4d-transition metals on the performance of Li-rich cathode Li2MnO3 by first-principles

A joint experimental and theoretical study on the effect of manganese doping on the structural, electrochemical and physical properties of lithium iron phosphate

Syntheses And Electrochemical Characterization Of Li-Rich Li2mn1-Xtixo3 Layered Materials Used For Lithium Ion Batteries

Structural and electrochemical characterization of (0 ≤ x ≤ 0.1) cathode materials

The Charge Compensation Mechanism and Structure Stability Study of Li2Mn15/16TM1/16O3 (tm=cr, Mo, W)

Research Development on Lithium Rich Layered Oxide Cathode Materials

Understanding the different effects of 4d-transition metals on the performance of Li-rich cathode Li<sub>2</sub>MnO<sub>3</sub> by first-principles

Doping Li-rich cathode material Li$_2$MnO$_3$: Interplay between lattice site preference, electronic structure, and delithiation mechanism

Site‐Selective In Situ Electrochemical Doping for Mn‐Rich Layered Oxide Cathode Materials in Lithium‐Ion Batteries

Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries