Abstract:Numerical simulation is essential for the prediction and evaluation of hydrocarbon reservoir performance. Numerical simulators developed for the description of the behavior of hydrates under production and the corresponding flow of fluids and heat accounting for all known processes are powerful, but they need validation through comparison to field or experimental data in order to instill confidence in their predictions. In this study, we analyze by means of numerical simulation the results of an experiment of methane hydrate dissociation by thermal stimulation in unconsolidated porous media heated through the vessel walls. The physics captured by the model include multicomponent heat and mass transfer, multiphase flow through porous media, and the phase behavior of the CH4 + H2O system involved in methane hydrate formation and dissociation. The set of governing equations consists of the mass and energy conservation equations coupled with constitutive relationships, i.e., the dissolution of gas in H2O, relative permeability and capillary pressure models, composite thermal conductivity models, and methane hydrate phase equilibria. The model geometry describes accurately the hydrate reactor used in a recent experimental study investigating methane hydrate dissociation behavior [Chong et. al. Appl. Energy 2016, 177, 409–421]. The cumulative gas production is estimated and validated against three tests of experimental data involving different boundary temperatures, showing a good agreement between observations and numerical predictions. The predicted evolution of the spatial distributions of different phases over time shows that hydrate dissociation progresses inward from the reactor boundary to the center, methane gas accumulates to the top of the reactor because of buoyancy, and water migrates down to the bottom of the reactor because of gravity. A sharp hydrate dissociation front is predicted, and the estimated location of hydrate dissociation front suggests a linear relationship with the square root of time. A sensitivity analysis on the thermal conductivity of sand under fully saturated conditions is conducted to elucidate its effect on the gas production behavior. In addition, the energy efficiency ratio computed from the simulation of this boundary-wall heating technique varies from 14.0 to 16.2. Deviations between observations and predictions of the evolution of the temperature profile are attributed to initial heterogeneous distribution of the hydrate phase in the hydrate reactor.

Equivalency and Replaceability Between Different Permeability Models of Hydrate-Bearing Porous Media when Applied to Numerical Modeling of Hydrate Dissociation: Implications for Model Selection and Parameter Assignment

Pore‐Scale Controls on the Gas and Water Transport in Hydrate‐Bearing Sediments

Modeling the Effect of Permeability on Methane Gas Production from Hydrates in Porous Media

Numerical Studies of Hydrate Dissociation and Gas Production Behavior in Porous Media During Depressurization Process

An Analytical Model for the Permeability in Hydrate‐Bearing Sediments Considering the Dynamic Evolution of Hydrate Saturation and Pore Morphology

Numerical Modeling of the Physical Parameters of the Heated-Water Dissociation Interface into the Natural Gas Hydrates Reservoir

Numerical Simulation of the Gas Production Behavior of Hydrate Dissociation by Depressurization in Hydrate-Bearing Porous Medium

Permeability Models of Hydrate-Bearing Sediments: A Comprehensive Review with Focus on Normalized Permeability

Pore-scale modeling of flow in particle packs containing grain-coating and pore-filling hydrates: Verification of a Kozeny–Carman-based permeability reduction model

Pore scale modeling on dissociation and transportation of methane hydrate in porous sediments

Numerical Analysis of Experiments on Thermally Induced Dissociation of Methane Hydrates in Porous Media

A Pore-Scale Study on Microstructure and Permeability Evolution of Hydrate-Bearing Sediment During Dissociation by Depressurization

Modeling and characterizing the thermal and kinetic behavior of methane hydrate dissociation in sandy porous media

Numerical Simulation for Laboratory-Scale Methane Hydrate Dissociation by Depressurization

Multiphysical evolution and dynamic competition involved in natural gas hydrate dissociation in porous media and its implications for engineering

A Novel Semi-Analytical Approach for Modeling Multiphysics Coupling Throughout the Entire Exploitation Process in Methane Hydrate-Bearing Sediments

Influence of Reservoir Permeability on Methane Hydrate Dissociation by Depressurization

Permeability Change Induced by Dissociation of Gas Hydrate in Sediments with Different Particle Size Distribution and Initial Brine Saturation

Effective permeability changes during hydrate production

Numerical Investigation Of The Gas Production Behavior Of Natural Gas Hydrates In Porous Sediments

Gas production analysis for hydrate sediment with compound morphology by a new dynamic permeability model