Thermal and Microwave Dielectric Properties of Li–Si-based Ceramics

Mingxia Wang,Chaowei Zhong,Zhengyi Yang,Hongyu Yang,Lei Cao,Tianying Qin,Shuren Zhang
DOI: https://doi.org/10.1016/j.ceramint.2021.03.089
IF: 5.532
2021-01-01
Ceramics International
Abstract:This paper investigates thermal conduction, thermal expansion and microwave dielectric properties of LixSi(0.50x similar to 0.65x)O(1.5x similar to 1.8x) (LS-based) ceramics. All samples were synthesized via the traditional solid-state reaction route. The mole ratio of Si4+/Li+ ranges from 0.50 to 0.65. According to the results, the composite of Si4+/Li+ = 0.55 showed high thermal conductivity of 8.325 W/(mK) and an average coefficient of thermal expansion of 8.401 x 10(-6)/K (at the temperature between 100 degrees C to 150 degrees C). In order to enhance the thermal properties, 4 wt % Al2O3 is added to the LS-based ceramics and the most excellent thermal properties were obtained on the sample with the mole ratio of Si4+/Li+ = 0.55, exhibiting the properties of the highest thermal conductivity of 11.836 W/(mK), an average coefficient of thermal expansion of 10.748 x 10(-6)/K (at the temperature between 100 degrees C to 150 degrees C), the lower dielectric constant of 6.32, excellent flexural strength of 194 MPa, and the optimum Q x f of 4565 GHz. In the present study, a new type of LS-based ceramics suitable for the transition layer of circuit board was developed. The doping of the Al2O3 into the LS-based ceramics can significantly improve its thermal conductivity, adjust the coefficient of thermal expansion and promote the start-temperature of crystallization to a lower direction.
What problem does this paper attempt to address?