Abstract:The coupled hydro-mechanical process has played an important role in design and safety assessment in many engineering fields, such as dam engineering, geotechnical engineering and environmental engineering. Mathematical models for coupled hydro-mechanical process have been dominated by the finite element method (FEM) using equivalent continuum approaches. The aim of this paper is to present a new model to simulate the fracture process with hydro-mechanical interaction by the extended Finite Element Method (XFEM), which is a local partition of unity (PU) enrichment method. The proposed model includes: 1) the expression of the discontinuous displacement across the propagating crack; 2)the crack model for the mechanical behavior of cracking concrete; and 3) the description of the water flow in propagating crack. In XFEM, problem-specific functions can be introduced to construct a proper approximation space. For example, the discontinuous displacement across the crack can be represented by enriching the Heaviside function to the nodes whose supports cut by the crack. The description of discontinuities is no longer dependent of mesh boundaries. So for simulation of moving discontinuities the re-meshing work can be avoided. The cohesive crack model which originated from the fictitious crack model by Hillerborg et al is employed for the description of concrete cracking. In this model the deformation caused by cracking is assumed to concentrate into the discontinuity. The discrete approach is intuitively appealing for the crack is introduced explicitly. More importantly this direct reflection of the change in topology makes it possible to describe the water flow in cracks in a straightforward manner. The modified cube’s law is used to compute the water flow state during the cracking process. Considering that the crack opening displacement (COD) changes during fracture process, the flow state will change with both time and solid boundary conditions. For convenience the computational fluid dynamics (CFD) solution is achieved by iteration. For the whole fluid-structure system, a loose-coupling technical is adopted in this paper. This approach solves the coupled system also using an iteration strategy, in which the loop of the CFD solution followed by computational structural dynamics (CSD) solution is repeated until convergence is achieved. So a dual-iteration system is included in the solve scheme.

An Enhanced Virtual Crack Closure Technique for Stress Intensity Factor Calculation along Arbitrary Crack Fronts and the Application in Hydraulic Fracturing Simulation

A modified three-dimensional virtual crack closure technique for calculating stress intensity factors with arbitrarily shaped finite element mesh arrangements across the crack front

Calculation of transient strain energy release rates under impact loading based on the virtual crack closure technique

Application of Virtual Crack Closure Technique in Structure Fracture Analysis

An X-FEM Approach for Simulation of 3-D Multiple Fatigue Cracks and Application to Double Surface Crack Problems

COMPUTATION OF STRESS INTENSITY FACTORS FOR CRACK GROWTH IN DOUBLE TENSION SPECIMENS

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

An Efficient and Accurate Numerical Method of Stress Intensity Factors Calculation of a Branched Crack

Virtual Crack Closure Technique in Peridynamic Theory

Application of Virtual Crack Close Technique in the Static Crack Growth Based on Strain Energy Release Rate Criterion

Crack-closure behavior and stress-sensitive wave velocity of hard rock based on flat-joint model in particle-flow-code (PFC) modeling

Based on ANSYS the Application of Virtual Crack Close Technique in the Calculation of Strain Energy Release Rate in Interface Crack

Cell-Based Smoothed Finite Element Method-Virtual Crack Closure Technique for a Piezoelectric Material of Crack

Efficient Evaluation of Stress Intensity Factors Using Virtual Crack Extension Technique

Computation of the Crack Propagation Energy Release Rate Based on the Virtual Crack Closure Technique

Direct Computation of 3-D Stress Intensity Factors of Straight and Curved Planar Cracks with the P-Version Finite Element Method and Contour Integral Method

On the computation of energy release rates by a peridynamic virtual crack extension method

A Hybrid Finite Volume and Extended Finite Element Method for Hydraulic Fracturing with Cohesive Crack Propagation in Quasi-Brittle Materials

Progressive Crack Growth Analysis Using Interface Element Based on the Virtual Crack Closure Technique

Theoretical Analysis of Stress Intensity Factor for Two Asymmetric Cracks Emanating from Water Conveyance Tunnel

Modeling of Fracture Process under Water Pressure in Crack using XFEM