Abstract:Mussel-inspired polydopamine (PDA) can serve as building blocks and interfaces in designing functional materials. Here, the use of PDA as an interlayer between polyaniline (PANi) and multidimensional carbon materials, such as graphene quantum dots (GQD), multiwalled carbon nanotubes (MWCNT), and graphene nanosheets (GNS), to improve the thermoelectric performance of p-type polymer-based materials has been reported. The introduction of PDA promotes the carrier mobility of GQD/PDA/PANi, CNT/PDA/PANi, and GNS/PDA/PANi ternary composites due to the superior adhesive property of PDA. An optimal conductivity of 4.98 × 104 S m–1 and a power factor of 92.17 μW m–1 K–2 at 363 K are achieved in GNS/PDA/PANi, which are much higher than the values of GNS/PDA and GNS/PANi. More surprisingly, despite the fact that GQD/PDA, CNT/PDA, and GNS/PDA binary composites show p-type properties, the pyrolysis treatment of GQD/PDA, CNT/PDA, and GNS/PDA at 800 °C results in a gain in both the electrical conductivity and negative Seebeck coefficient of c-GQD/PDA, c-CNT/PDA, and c-GNS/PDA. The c-CNT/PDA composites possess the highest Seebeck value of −30.2 μV K–1 and a maximum power factor value of 35.57 μW m–1 K–2. Finally, a flexible thermoelectric generator with 24 thermoelectric units composed of GNS/PDA/PANi and c-CNT/PDA is demonstrated, which gives an output voltage of 52.8 mV at a temperature difference of 60 °C.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01457?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01457</a>.Thermal conductivity measurements and TE characterization; electrical conductivity and Seebeck coefficient of all the samples at 303, 333, and 363 K; TE properties of pristine GQD, CNT, and GNS at 363 K; FTIR spectra, XPS spectra, TEM images, and size distributions of GQD; appearance of GNS dispersion solution and GNS/PDA dispersion solution in water after ultrasonication; carrier mobility and carrier concentration of PANi-based composites at 363 K; PF and thermal conductivity of PDA and PDA-based composite materials at 363 K; PF and thermal conductivity of PANi-based binary composites at 363 K; digital photos of n-type composite films of bending 150 and 180° and after bending 180°; cross-sectional SEM images of n-type composite films of bending 180° and magnification times; digital photos showing bending of p-type composite films by 150 and 180° and after bending to 180°; cross-sectional SEM images showing the bending of p-type composite films by 180° and magnification times; and schematic diagram of the device configuration and the working principle of TEG (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01457/suppl_file/am1c01457_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High performance n-type thermoelectric material based on naphthalenediimide radical anions

Enhancement of the Thermoelectric Performance of n -Type Naphthalene Diimide-Based Conjugated Polymer by Engineering of Side Alkyl Chains

Bismuth Interfacial Doping of Organic Small Molecules for High Performance n‐type Thermoelectric Materials

Enhancing the Performance of N‐Type Thermoelectric Devices via Tuning the Crystallinity of Small Molecule Semiconductors

New Thermoelectric Material and Devices: Naphthol[1,3]oxazine and the Performance Compared with Bismuth Telluride

A Thermally Activated And Highly Miscible Dopant For N-Type Organic Thermoelectrics

Toward High Performance n-Type Thermoelectric Materials by Rational Modification of BDPPV Backbones.

Enhancement of the charge-generation efficiency for a naphthalene diimide-based polymer semiconductor by using a pyrene-substituted n-dopant

Flexible n-type thermoelectric composite films with enhanced performance through interface engineering and post-treatment

Cyano‐Functionalized Fused Bithiophene Imide Dimer‐Based n‐Type polymers for High‐Performance Organic Thermoelectrics

High‐performance And Ecofriendly Organic Thermoelectrics Enabled by N‐type Polythiophene Derivatives with Doping‐induced Molecular Order

Realizing High-Efficiency Thermoelectric Module by Suppressing Donor-Like Effect and Improving Preferred Orientation in N-Type Bi2(Te, Se)3

High performance of p-type and n-type thermoelectric materials based on liquid crystal mixture and single-walled carbon nanotube composites

Ion Exchange Induced Efficient N‐Type Thermoelectrics in Solid‐State

Novel Hybrid p- and n-Type Organic Thermoelectric Materials Based on Mussel-Inspired Polydopamine

B←N-Incorporated Dibenzo-azaacenes as n-Type Thermoelectric Materials

Controlling the Thermoelectric Performance of Doped Naphthobisthiadiazole‐Based Donor–Acceptor Conjugated Polymers through Backbone Engineering

A Novel Photo‐Activated Dopant for n‐Type Organic Thermoelectrics

Hierarchical Low-Temperature n-Type Bi2Te3 with High Thermoelectric Performances

High power efficiency nitrides thermoelectric device

Transparent Charge Transfer Complex with High Thermoelectric Performance