Abstract:Metallic glass usually ruptures at a small strain by forming single dominant shear band under tension at room temperature. Experiments have shown that multiple shear bands can be induced in metallic glass film by a ductile metallic substrate, and the ductility of the film can be elevated significantly. However, the mechanism behind remains unsolved. Here we established a computational model to investigate the effect of a Ni substrate on the deformation of a Ni-P amorphous film. The shear band evolution in the film was described by a free volume-based constitutive theory, while the deformation of the Ni substrate was simulated by a dislocation density-based model. The film/substrate interface was modeled by a cohesive zone law. In the simulations, the shear band evolution and the stress in the film can be measured directly, which is difficult to achieve in experiments. Our simulations show that multiple shear bands have been formed in the substrate-supported metallic glass film if the film thickness h f is less than 10 mu m. The thinner the film is, the more the shear bands the film has. The number of shear bands can reach as high as 16 as h f is refined down to 2.5 mu m. The generation of the multiple shear bands alleviated the strong strain-softening as observed in free standing film, as clearly shown in the stress-strain response of the thin film in the film/substrate system. The suppressed strain-softening induces significantly enhanced tensile ductility in the amorphous film. The tensile ductility of the 2.5 mu m-thick film on the Ni substrate can reach as high as 13.3%, which is much higher than that of the corresponding freestanding film, i.e., 3.1%. The proposed computational model has been validated by the coincident stress-strain responses between simulations and experiments. The findings revealed that the enhanced tensile ductility originates from the shear band multiplication-induced strain delocalization in the amorphous film due to the constraint of the metallic substrate. (C) 2020 Elsevier Ltd. All rights reserved.

Anisotropic and Size-Dependent Mechanical Responses of Free-Standing Ni-Nb Metallic Glass Thin Film

Surface Compressive and Softening Effect on Deformation Mode Transition in Ni-Nb Metallic Glassy Thin Films: A Molecular Dynamics Study

Ductility and Work Hardening in Nano-Sized Metallic Glasses

Natural Aging of Ni60Nb40 Metallic Glass Thin Film: Evolution of Microstructure and Mechanical Properties

Atomic Picture of Elastic Deformation in a Metallic Glass.

The Size-Dependent Non-Localized Deformation in A Metallic Alloy

Nanometallic Glasses: Size Reduction Brings Ductility, Surface State Drives Its Extent.

Revealing the Structural Heterogeneity of Metallic Glass: Mechanical Spectroscopy and Nanoindentation Experiments

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Coupling Effects of Thickness and Aspect Ratio on Deformation Behavior of Cu50Zr50 Metallic Glass

Tensile ductility and necking of metallic glass

Uniform Tensile Elongation in Framed Submicron Metallic Glass Specimen in the Limit of Suppressed Shear Banding

Size Effects on Tensile and Compressive Strengths in Metallic Glass Nanowires

Mechanical Behavior of Micronanoscaled Metallic Glasses

Tensile deformation of metallic glass and shape memory alloy nanolaminates

Multi-scale Inhomogeneity and Anomalous Mechanical Response of Nanoscale Metallic Glass Pillar by Cryogenic Thermal Cycling

Stress-state-dependent deformation behavior in Ni-Nb metallic glassy film

Inverse size effects in un-notched and notched metallic glass thin films

Structural heterogeneity governing deformability of metallic glass

Ductile Necking Behavior of Nanoscale Metallic Glasses under Uniaxial Tension at Room Temperature

Shear band multiplication induced strong strain delocalization and high tensile ductility in amorphous thin films by metallic substrates