Abstract:In this work, we report the significant enhancement of the electrochemical performance and flexibility of a lithium-oxygen battery by introducing a free-standing, binder-free carbon nano-fibers (CNF) grafted carbon paper cathode with a bimodal pore architecture. The small pore structures (similar to 100 nm) accommodated Li2O2, and the large pore structures (similar to 10 mu m) enabled effective oxygen diffusion without clogging the pores. This kind of cathode overcame some troubles of the cathode prepared by spraying coating method, such as the low utilization of substrate surface, the unreasonable aperture structure and the aggregation of active carbon material. As a result, this electrode structure imparted stability to active sites during the recovery of discharge products to the initial state, providing long-term cyclability of more than 800 cycles in a 1 M LiTFSI/TEGDME electrolyte system. In addition, the battery output a discharge capacity as high as 20000 mAh g(-1) at 468 mA g(-1) and exhibited a charge/discharge rate as high as 1136 mA g(-1) (0.57 mA cm(-2)). The test results suggest that these CNF-grafted carbon papers have the potential to be used for oxygen/air electrodes for next-generation lithium-oxygen batteries, though the present results need to be improved to achieve performance of practical significance, namely with regard to (i) cathode mass loading to get higher areal capacity, and (ii) cycling performance at higher current density. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Carbon Decorated Ni(OH)2 Nanoflakes on Ni Foam As a Binder-Free Cathode for Lithium–Oxygen Batteries

Enabling Highly Stable Li–O2 Batteries with Full Discharge–Charge Capability: the Porous Binder- and Carbon-Free IrNi Nanosheet Cathode

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

A Composite of Carbon-Wrapped Mo2c Nanoparticle and Carbon Nanotube Formed Directly on Ni Foam As A High-Performance Binder-Free Cathode for Li-O-2 Batteries

CNF-grafted Carbon Fibers As a Binder-Free Cathode for Lithium Oxygen Batteries with a Superior Performance

Carbon-free (co, Mn)3O4 Nanowires@ni Electrodes for Lithium-Oxygen Batteries.

Binder-free Multilayered SnO2/graphene on Ni Foam As a High-Performance Lithium Ion Batteries Anode

Binder-Free Nitrogen-Doped Carbon Nanotubes Electrodes for Lithium-Oxygen Batteries

Nanoarchitectured Cnts-Grafted Graphene Foam With Hierarchical Pores As A Binder-Free Cathode For Lithium-Oxygen Batteries

N, F Co‐Doped Carbon Material Self‐Supporting Cathode for High‐Performance Lithium‐Oxygen Batteries

Hierarchical Porous Nickel Cobaltate Nanoneedle Arrays as Flexible Carbon-Protected Cathodes for High-Performance Lithium-Oxygen Batteries

Facile Preparation of Mn3O4-coated Carbon Nanofibers on Copper Foam As a High-Capacity and Long-Life Anode for Lithium-Ion Batteries

Li-Ion Batteries with a Binder-Free Cathode of Carbon Nanotubes-LiFePO4-Al Foam

Coo Nanosheets Derived from Electrodeposited Cobalt Metal Towards High Performance Lithium Ion Batteries

Preparation of A New Carbon Nanofiber As A High-Capacity Air Electrode for Nonaqueous Lithium-Oxygen Batteries

Hierarchical Carbon-Free NiCo 2 O 4 Cathode for Li–O 2 Batteries

Hierarchical Porous NiCo2O4 Nanosheet Arrays Directly Grown on Carbon Cloth with Superior Lithium Storage Performance

High Energy and Power Density Li–O2 Battery Cathodes Based on Amorphous RuO2 Loaded Carbon Free and Binderless Nickel Nanofoam Architectures

Designed constitution of NiO/Ni nanostructured electrode for high performance lithium ion battery

Cu-supported Nitrogen-Doped Carbon Nanofibers with Hierarchical Three-Dimensional Net Structure As Binder-Free Anodes for Enhanced Lithium-Ion Batteries

Superior-capacity Binder-Free Anode Electrode for Lithium-Ion Batteries: CoxMny NizO Nanosheets with Metal/oxygen Vacancies Directly Formed on Cu Foil