Mesoporous Goethite for Rapid and High-Capacity Fluoride Removal from Drinking Water

Xiao Zhao,Ying Li,Kenneth C. Carroll,Fangfang Li,Liuchao Qiu,Zailin Huo
DOI: https://doi.org/10.1016/j.jece.2021.105278
IF: 7.7
2021-01-01
Journal of Environmental Chemical Engineering
Abstract:Fluoride (F) contamination is widely distributed due to natural or anthropogenic causes. A series of mesoporous goethite (a-FeOOH) were synthesized by hydrothermal treatment for rapid F removal from water. The morphology of adsorbents was found to be controlled by varying the hydrothermal and calcination conditions. A highly crystallized FeOOH can be prepared at hydrothermal temperature of 80 degrees C without further calcination. The sorption isotherm data could be adequately described by Freundlich model and kinetic data followed pseudo-second-order kinetic model. The highest adsorption capacity is as high as 80.1 mg/g. Mesoporous FeOOH exhibited high adsorption capacity in a wide pH range of 3-10 with final pH falling into a stable range (pH 5-6). The presence of Cl- and NO3- seldom impacted the adsorption performance, while addition of high concentrations of CO32- and PO43- (30 mg/L) weakened the adsorption capacity up to 18.2%. For the recycle tests with real Fcontaminated groundwater, the removal efficiency dropped slightly from 93.1% (at cycle 1) to 91.8% (at cycle 5), suggesting the adsorbents is powerful for practical use. The FTIR, SEM, and XPS characterization results all confirmed the adsorption of F and revealed that the major adsorption mechanism is the ion-exchange between F ions and hydroxyl groups on the surface of FeOOH.
What problem does this paper attempt to address?