Abstract:In order to investigate the influences of modification on industrial-grade cathode materials, layered Ti-doped Li(Ni0.5Co0.2Mn0.3)(1-x)TixO2 cathode materials have been synthesized via a simple solid state method using industrial raw materials in bulk scale ( > 10 kg) in this work. X-ray diffraction (XRD), Rietveld refinement, scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) mapping, particle size distribution and electrochemical tests including cyclic voltammetry (CV) and electrical impedance spectroscopy (EIS) have been used to characterize electrochemical performance of industrial-grade cathode materials. The results of XRD, SEM and EDS mapping characterization indicate that all the modified cathode materials with their Ni, Co and Mn components doped by titanium keep a typical alpha-NaFeO2 layered structure with R-3m space group and titanium atoms are uniformly distributed in all series of Ti-doped materials as prepared. Electrochemical characterization confirms that the material of 0.2% Ti doping has the best cycling performance and the least capacity loss because of its best cation ordering figured by Rietveld refinement of XRD. The initial discharge capacity of 0.2% Ti doping material achieves 185.0 mA h/g at 1 C between 2.8 and 4.6 V. Additionally, the capacity retention maintains at 93.4% after 200 charge discharge cycles. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Interface Crystal Domain Regulation Via TiO2 Surface Modification Enhancing Stability of Layered LiNi0.5Co0.2Mn0.3O2 for Lithium-Ion Batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Investigation on performance of Li(Ni 0.5 Co 0.2 Mn 0.3 ) 1−x Ti x O 2 cathode materials for lithium-ion battery

Enhanced High-Potential and Elevated-Temperature Cycling Stability of Limn2o4 Cathode by Tio2 Modification for Li-Ion Battery

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

Surface Encapsulation of Layered Oxide Cathode Material with NiTiO 3 for Enhanced Cycling Stability of Na-Ion Batteries

Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Stabilizing Surface Chemistry and Texture of Single-Crystal Ni-rich Cathodes for Li-ion Batteries

Stabilizing Cathode Materials of Lithium-Ion Batteries by Controlling Interstitial Sites on the Surface

A novel perspective on surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materialfor lithium‐ion batteries

Improvement of the High-Temperature, High-Voltage Cycling Performance of Lini0.5co0.2mn0.3o2 Cathode with Tio2 Coating

Significant Improvement on Electrochemical Performance of LiMn2O4 at Elevated Temperature by Atomic Layer Deposition of TiO2 Nanocoating

Stabilizing the Oxygen Ions and Alleviating the Surface Structure Evolution of Li-Excess Layered Cathode for Advanced Lithium-Ion Batteries

Effect of TiO2-coating on the Electrochemical Performances of LiCo1/3Ni1/3Mn1/3O2

Epitaxial Growth of an Atom-Thin Layer on a LiNi0.5Mn1.5O4 Cathode for Stable Li-ion Battery Cycling

Regulating Surface and Grain-Boundary Structures of Ni-Rich Layered Cathodes for Ultrahigh Cycle Stability

Surface modification single crystal Li-rich Li1.2Mn0.54Ni0.13Co0.13O2 as high performance cathode materials for Li-ion batteries

Single–crystalline LiNi0.8Co0.1Mn0.1O2 Stabilized by F–doping–induced Superlattice for 4.8 V Lithium–ion Batteries

Improved Cycling Stability of Ni-Rich Cathode Material by In Situ Introduced TM-B-O Amorphous Surface Structure

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering