Detonation Re-initiation Behind an Aluminum Foam Plate in Stoichiometric Methane-oxygen Mixture

Lu-Qing Wang,Hong-Hao Ma,Zhao-Wu Shen,Jun Pan

DOI: https://doi.org/10.1080/00102202.2021.1893703

IF: 1.9

2021-01-01

Combustion Science and Technology

Abstract:Porous materials can be used for accidental explosion prevention and suppression in process industries. In this study, an experimental study was conducted to study the effect of an aluminum foam plate on stoichiometric methane-oxygen detonation propagation behavior at different initial pressures (i.e., 10 kPa to 50 kPa). Experiments were carried out in a 4.4-m long, 48-mm diameter tube. Downstream of the foam plate, the detonation velocity was measured using even-spaced photodiodes, and the detonation structure evolution was recorded using the soot foil technique. The density of the aluminum foam was 1.1 g/cm(3) and the thicknesses were 10 mm and 15 mm. Results demonstrate that behind the foam plate, the detonation fails first and re-initiates after a certain distance (re-initiation distance). At the end of the tube, the detonation velocity can be steady although the velocity fluctuation is significant downstream of the plate. The soot pattern indicates that the onset of detonation is achieved via the interaction between shock waves and wall, and fast turbulence mixing. For the case of the 10-mm foam plate, the single-headed mode can be observed. Generally, the re-initiation distance increases with the cell size. When the single-headed spin appears, the re-initiation distance is decreased notably.