Abstract:Closed-loop load transfer is an effective measure to improve the power supply reliability of radial distribution networks. However, the traditional closed-loop load transfer mode is passive for operators: the loop closing operation relies on complex network models and calculation methods, which is feasible for the distribution network with many sensors, but it is not practical for the low-voltage distribution network with a complex structure. The field operation is still based on the experience of operators, resulting in uncertainty of the loop closing and large loop-closing current. Besides, the coordination of multiple power sources for guaranteeing power supply can not guarantee the power quality and the economic cost is high, in which the adopted closed-loop device is not movable and has poor reusability. This article presents an active loop-closing mode: a seamless closed-loop load transfer system (SLTS), which can not only realize uninterrupted load transfer but also eliminate loop closing surge current and expand the application range of closed-loop load transfer. In the proposed system configuration, a series compensation voltage source is connected to two substations. Therefore, closed-loop current can be controlled flexibly by regulating this voltage source. The proposed system can be applied to adjacent substations to carry out closed-loop load transfer operations during equipment maintenance. Besides, it can be installed between two radial feeders to achieve seamless fault seal-healing. The control strategy of seamless closed-loop load transfer and fault seamless self-healing are proposed, respectively. The effectiveness of the proposed SLTS and the designed control strategy are validated via MATLABSimulink.

A Seamless Transfer Control Strategy of SNOP for the Critical Load Safety under Network Faults

A Control Strategy for Enhanced Operation of SNOP under Transient Disturbances and Network Faults

Coordinated Emergency Load Shedding Control Optimization Algorithm for Economic Cost and Accident Assessment

Self-healing Control Strategy Based on SNOP under Severe Fault Condition

Control strategies for active distribution networks based on soft open point

Switching Technology of Three-Terminals Soft Open Point Control Mode

An Adaptive Power Control Method for Soft Open Points Based on Virtual Impedance

Short-Circuit Fault Protection Scheme for Serial-Shunt Type Soft Normally Open Point

Optimized Two-Time Scale Robust Dispatching Method for the Multi-Terminal Soft Open Point in Unbalanced Active Distribution Networks

Optimal Planning of SNOP Considering Natural Disaster

Research on Topology and Control Technology of Soft Multi-State Open Point with Fault Isolation Capability

A Two-Layer Control Strategy for Soft Open Points Considering the Economical Operation Area of Transformers in Active Distribution Networks

A Novel Method for Seamless Closed-Loop Load Transfer in Radial Distribution Networks

Resilience-Oriented Optimal Allocation of Multi-Port Soft Open Point in Distribution Network

Load-balancing Control Strategy Considering Network Topology and Commutation Limitation

Real-Time Coordinated Control of Low-Voltage DC Distribution Network With Soft Opening Point

Load Shedding Method of Power Restoration of Distribution Network Based on SOP

Transient Analysis on Transfer Process of Hybrid Soft Open Point under Power Grid Outage

Series–Shunt Multiport Soft Normally Open Points

Research On An Improved Droop Control Strategy For Soft Open Point

Transient Analysis and Overcurrent Limited Strategy for Supply Restoration-Oriented Hybrid Soft Open Point