Abstract:Three series of poly(butylene terephthalate-co-succinate)-b-poly(ethylene glycol) segmented random copolymers with starting PEG number-average molecular weight (Mn(PEG)) at 600, 1000 and 2000, respectively, as well as hard segment poly(butylene succinate) (PBS) molar fraction (MPBS) increasing from 10% to 30% were synthesized through a transesterification/polycondensation process and characterized by means of GPC, NMR, DSC, WAXD and mechanical testing etc. The investigations were mainly focused on the influence of Mn(PEG) on the properties of resulting copolymers bearing two sorts of hard segments. It is revealed that all the samples show a relatively symmetrical GPC curves with the number-average molecular weight more than 4×104, while the polydispersity decreases from 1.9 to 1.4 as the increasing Mn(PEG) because of the prolonged time for polycondensation and the faster exclusion of small molecules by-product with the decreased molten viscosity. The sequence distribution analysis shows that the average sequence length of hard segment PBT decreases while that of PBS increases with the increasing MPBS and are independent of the soft segment length. The approximate unit degree of randomness as well as the soft segment length turns out that the segments take a statistically random distribution along the backbone. Micro-phase separation structure is verified for the appearance of two glass transition temperatures and two melting points, respectively, in DSC thermograms of most samples. The depression of melting points and the reduction of crystallinity of hard segments with increasing MPBS are related to the crystal lattice transition from α-PBT to PBS and discussed in the viewpoint of cohensive energy. Mechanical testing results demonstrate that the increase of amorphous domains the increase of MPBS as well as Mn(PEG) will provide high elongation and good flexibility of copolymer chain. The in vitro degradation experiments show that the partial substitution of aromatic segment PBT with aliphatic PBS will substantially accelerate the degradation rate with enhanced safety of degradation by-products and while changing Mn(PEG) broaden the spectrum to tailor the properties.

Effect of Block Number and Weight Fraction on the Structure and Properties of Poly(butylene Terephthalate)-Block-poly(tetramethylene Oxide) Multiblock Copolymers

Poly(L-Lactic Acid)-Block-Poly(Butylene Succinate-Co-Butylene Adipate) Multiblock Copolymers: from Synthesis to Thermo-Mechanical Properties

Synthesis and Thermomechanical and Rheological Properties of Biodegradable Long-Chain Branched Poly(Butylene Succinate-Co-Butylene Terephthalate) Copolyesters

Effect of Poly(4‑tert-Butylstyrene) Block Length on the Microphase Structure of Poly(ethylene Oxide)-B-poly(4-vinylbenzyl Chloride)-B-poly(4‑tert-butylstyrene) Triblock Terpolymers

Tuning the Mechanical Properties of Weakly Phase-Separated Olefin Block Copolymer by Establishing Co-Crystallization Structure with the Aid of Linear Polyethylene: the Dependence on Molecular Chain Length

Synthesis and Characterization of Poly(Butylene Terephthalate)-Co-Poly(Butylene Succinate)-B-Poly (ethylene Glycol) Segmented Block Copolymers

Preparation and Properties of PBT/PTMG Block Poly (ether Ester) with Different Molar Ratio of BDO

Composition Dependence of the Thermal Behavior, Morphology and Properties of Biodegradable PBS/PTMO Segment Block Copolymer

Interplay of Microphase Separation, Crystallization and Liquid Crystalline Ordering in Crystalline/liquid Crystalline Block Copolymers

Effect of Copolymerized Butylene Terephthalate Chains on Polymorphism and Enzymatic Degradation of Poly(Butylene Adipate)

PBT-b-PEO-b-PBT triblock copolymers: Synthesis, characterization and double-crystalline properties

Synthesis of Poly(butylene Terephthalate)-Block-poly(ethylene Oxide)-Block-poly(propylene Oxide)-Block-poly(ethylene Oxide) Multiblock Terpolymers Via a Facile PROP Method

Correlating Structure-Mechanics Relationship of Multiblock Copolymers: Insights from Molecular Dynamics Simulation

Poly(ethylene Succinate)-B-poly(butylene Succinate) Multiblock Copolyesters: the Effects of Block Length and Composition on Physical Properties

A One Pot Facile Synthesis of Poly(Butylene Terephthalate)-Block-Poly(Tetramethylene Oxide) Alternative Multiblock Copolymers Via Prop Method

Characterization and Chain Structure of PEG/PBT Copolymer with the Constant Mass Ratio of Soft to Hard Segment

Effects of Poly(cyclohexanedimethylene Terephthalate) on Microstructures, Crystallization Behavior and Properties of the Poly(ester Ether) Elastomers.

The influence of soft segment length on the properties of poly(butylene terephthalate-co-succinate)-b-poly(ethylene glycol) segmented random copolymers

Aromatic-aliphatic random and block copolyesters: Synthesis, sequence distribution and thermal properties

CHARACTERIZATION AND PROPERTIES OF PBT-co-PCT-b-PEG SEGMENTED BLOCK COPOLYMERS WITH VARYING SOFT SEGMENT LENGTH

Synthesis and Properties of Biodegradable Poly(ester-co-carbonate) Multiblock Copolymers Comprising of Poly(butylene Succinate) and Poly(butylene Carbonate) by Chain Extension