Abstract:Hierarchical microstructures spanning from micro-sized eutectic structure to nano-sized precipitates are promisingly engineered in lightweight Al alloys to improve the high-temperature creep resistance that is increasingly required for rapid industrial development. However, the intrinsically-brittle eutectic phase is ready to fracture upon applied loading, which, dramatically reducing room-temperature ductility and fracture toughness, greatly hampers practical applications of the creep-resistant Al alloys. Here, through the combination of Sc microalloying with sub-rapid solidification, we observe the ductilization of Al 11 Ce 3 eutectic phase in cast heat-resistant Al-Ce-Sc alloys due to the formation of atomic-scale compositional complexity. High-concentration Sc atoms are frozen within the Al 11 Ce 3 intermetallic phase by the sub-rapid solidification, which then assemble into unusual atomic-scale compositional dipoles with the Sc atoms enriched at one pole and the Al atoms at the opposite during subsequent heat treatment. The dispersed Sc-Al compositional dipoles induce local lattice distortions that stimulate dislocation activities, as temporally and spatially visualized by in-situ neutron diffraction tensile test and microstructural characterizations. The unexpected plastic deformation triggered in Al 11 Ce 3 improves the deformation compatibility between the eutectic phases, enabling the sub-rapidly-solidified Al-Ce-Sc alloy to reach a room-temperature tensile elongation 3 times and fracture toughness over 8 times of its counterpart derived from traditional solidification. In addition, the sub-rapidly-solidified Al-Ce-Sc alloy exhibits an excellent creep resistance at 300 °C, achieving a tensile creep stress threshold of ∼ 70 MPa. These findings provide new perspectives on the design of ductile intermetallic phases and the development of creep-resistant Al alloys with application-level ductility.

Improving creep resistance of Al-12 wt.% Ce alloy by microalloying with Sc

Atomic-scale compositional complexity ductilizes eutectic phase towards creep-resistant Al-Ce alloys with improved fracture toughness

Microstructure and creep properties of cast hypereutectic Al-11Ce alloy with Si addition

Nanostructural Sc-based Hierarchy to Improve the Creep Resistance of Al–Cu Alloys

Microstructure and mechanical properties of as casted Al-Si-Sc-Ce alloys prepared by molten salt electrolysis with varied cooling rate

Effect of Zr and Sc Micro-Additions on the Microstructure and Mechanical Properties of As-Cast Al-5Ce Alloy

Coarsening behavior of Al3Sc interface precipitates and related impact on mechanical properties of AlFeNi-Sc alloy at 400 C

Co-stabilization of θ'-Al2Cu and Al3Sc precipitates in Sc-microalloyed Al-Cu alloy with enhanced creep-resistance

Refining Mechanism and Elevated-Temperature Mechanical Properties of Al-Ce Alloys Solidified under Super Gravity Field

Enhancing ambient and elevated temperature performance of hypoeutectic Al–Ce cast alloys by Al 3 (Sc,Zr) precipitate

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy

Tailoring Precipitation Strategy to Optimize Microstructural Evolution, Aging Hardening and Creep Resistance in an Al–Cu–Sc Alloy by Isochronal Aging

Effects of Sc Addition on the Microstructure and Mechanical Properties of Cast Al-3Li-1.5Cu-0.15Zr Alloy

Enhanced load transfer and ductility in Al–9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing

Superior high temperature creep resistance of a cast Al–Mg–Ca-Sc alloy with multi-scale hierarchical microstructures

The Effect of Grain Refinement and Precipitation Strengthening Induced by Sc or Er Alloying on the Mechanical Properties of Cast Al-Li-Cu-Mg Alloys at Elevated Temperatures

Si-mediated reassembly of interfacially segregated Sc atoms in an Al-Cu-Sc alloy exposed to high-temperature creep

Microstructure and performance of high-speed laser-welded joints in novel heat-resistant Al–12Ce–0.4Sc alloy

Influence of Sc Content on the Microstructure and Mechanical Properties of Cast Al-2Li-2Cu-0.5Mg-0.2Zr Alloy

Effect of Ce Content on the Microstructure and Mechanical Properties of Al-Cu-Li Alloy

Effect of Rare Earth Ce Addition on the Microstructure and Mechanical Properties of an Al–Cu–Mg–Ag Alloy