Abstract:Sintered metals serving as thermal interface materials (TIMs) with superior thermal conductivities show the most promise in meeting the heat dissipation requirements of next-generation wide bandgap applications. Nevertheless, their thermal stabilities during high-temperature service provide significant challenges. Herein, a facile approach was developed for one-step synthesis of single-phase Ag-Cu supersaturated solid-solution nanoparticle (Ag-Cu SS-NP) pastes with adjustable Cu contents (up to 37.7 at.%), and they exhibited ultrahigh resistance to oxidation and excellent sinterability. A paste composed of Ag-Cu SS-NPs was sintered in air at 250 degrees C for 20 min, and this resulted in a dense supersaturated structure with an impressive thermal conductivity of 157.8 W/(m K) and a room-temperature shear strength of 133.4 MPa. Microstructural analyses demonstrated that Cu had precipitated from the Ag lattice to form Cu nanoprecipitates, which refined the grain sizes and induced high-density dislocations during sintering. For the pinning effect of dislocations and grain boundaries by the Cu nanoprecipitates and coherent twins, the high-temperature (400 degrees C) shear strength of sintered Ag-Cu SS-NP joints was significantly improved by 67 % (58.6 MPa), meanwhile the shear strength after long-term aging at 20 0 and 30 0 degrees C for 960 h were increased by 123 % (140.3 MPa) and 80 % (82.4 MPa) compared to those of sintered Ag NP joints, respectively. The remarkable thermal stability is far superior to traditional TIMs, so the Ag-Cu SS- NP paste exhibits excellent potential as a TIM for high-temperature power device applications. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Enhancement of high-temperature stability in sintered Ag joints on bare Cu substrates by inducing the transient liquid phase

Sn-enhanced high-temperature reliability of Cu/Nano-Ag/Cu joint via transient-liquid-phase bonding

Enhanced Thermal Stability of Joints Formed by Ag-Cu Supersaturated Solid-Solution Nanoparticles Paste by In-Situ Cu Nanoprecipitates

Effects of High-Temperature Treatment on the Reaction Between Sn-3%Ag-0.5%Cu Solder and Sputtered Ni-V Film on Ferrite Substrate

High-Temperature Reliability of Nano-Ag Sintered Joints on Ag-Plated Cu Substrates

Atomic Insights into the Sintering Behaviour of Ag-Cu Solid Solution Nanoparticles on Ag Substrate

Microstructural Evolution and Degradation Mechanism of SiC–Cu Chip Attachment Using Sintered Nano-Ag Paste During High-Temperature Ageing

Coexistent Improvement of Thermal and Mechanical Performance at Si/Cu Joint by Thickness-Controlled Sn-Ag Bond Layer

Microstructural Evolution and Mechanical Reliability of Transient Liquid Phase Sintered Joint During Thermal Aging

Interfacial Intermetallic Compound Growth in Sn-3Ag-0.5Cu/Cu Solder Joints Induced by Stress Gradient at Cryogenic Temperatures

Microstructure Evolution and Mechanical Properties of Cu/Sn/Ag TLP-bonded Joint During Thermal Aging

Effect of High Temperature Thermal Aging on Microstructural Evolution of Sn3Ag0.5Cu/Cu Solder Joints

Effect of cooling condition and Ag on the growth of intermetallic compounds in Sn-based solder joints

Effect of surface finish metallization on interfacial bonding behavior of sintered Ag joints

Microstructure Evolution and Fracture Mechanism of Sintered Nano-Ag Joints on Bare Copper During High Temperature Aging

Orientation transformation of Cu6Sn5 grains by Ag addition in Cu/Sn-xAg/Cu micro solder joints under temperature gradient

Highly Mechanical and High-Temperature Properties of Cu–Cu Joints Using Citrate-Coated Nanosized Ag Paste in Air

Effect of thermal stability on the sintering of Cu–Ag bimetallic nanoparticles

High Temperature Aging Study of Intermetallic Compound Formation of Sn-3.5Ag and Sn-4.0Ag-0.5Cu Solders on Electroless Ni (P) Metallization

Improving Shear Strength of Sn-3.0Ag-0.5Cu/Cu Joints and Suppressing Intermetallic Compounds Layer Growth by Adding Graphene Nanosheets

Intermetallic compound evolution and mechanical properties of Cu/Sn58Bi/Cu 3D structures blended with B 4 C nanoparticles during isothermal aging