Abstract:Chlorine sources and heavy metal catalysts play an important role in the formation of dioxins during the incineration of mineralized refuse in landfills. Through the use of different external chlorine sources and pretreatment methods, their effects on the formation of dioxins in flue gas from mineralized refuse incineration were studied. The effects of temperature, external chlorine sources, pretreatment methods and metal catalyst ratios on dioxin generation in the flue gas of mineralized refuse incineration were investigated with mineralized refuse. The effects of temperature, atmosphere and external chlorine source on the low-temperature re-synthesis of dioxins from mineralized refuse incineration fly ash were investigated, and the ability of re-synthesis of dioxins from mineralized refuse incineration fly ash and MSWI (Municipal Solid Waste Incineration) fly ash was compared using in situ XPS (X-ray Photoelectron Spectrometer) and heavy metal morphology analysis. The results showed that CuCl2 has the strongest catalytic effect on the formation of gaseous dioxin from mineralized refuse incineration. The components of mineralized refuse and water washing do not interfere with the mass concentration of dioxins in incinerated flue gas. The effect of temperature, atmosphere and external chlorine source on the low-temperature synthesis of dioxin from mineralized refuse incineration fly ash was similar to that of MSWI fly ash. The results of in situ XPS and speciation analysis of heavy metals show that the reducible metals in mineralized refuse fly ash was mainly composed of Fe. The stronger oxidation and chlorination of carbon and the stronger interaction between copper and iron in mineralized refuse fly ash make the dioxin synthesis capacity higher than that of MSWI fly ash. In addition, the concentration of gaseous dioxins produced by mineralized refuse incineration was directly proportional to the amount of CuCl2. However, changing the ratio of heavy metals weakened the de novo synthetic reaction to a certain extent, resulting in the change in 17 toxic dioxin isomers.

Characterization of Copper (II) Chemical Forms and Heavy Metal Distribution in Chemical Looping Gasification of Municipal Solid Waste

Emissions of Nitrogenous Pollutants in Chemical Looping Gasification of High Nitrogen Wood Waste Using a K-modified Copper Slag Oxygen Carrier

Chemical looping gasification of high nitrogen wood waste using a copper slag oxygen carrier modified by alkali and alkaline earth metals

Chemical Looping Gasification of Sewage Sludge Using Copper Slag Modified by NiO As an Oxygen Carrier

Hydrogen production from municipal solid waste via chemical looping gasification using CuFe 2 O 4 spinel as oxygen carrier: An Aspen Plus modeling

Experimental and thermodynamic investigation on transfer of cadmium influenced by sulfur and chlorine during municipal solid waste (MSW) incineration.

ENVIRONMENTAL CONCERNS AND POLLUTION CONTROL IN THE CONTEXT OF DEVELOPING COUNTRIES Impact of gas impurities on the Hg oxidation on high iron and calcium coal ash for chemical looping combustion

Effect of Calcium-Based Sorbents on the Reduction of Chlorinated Contaminants During Municipal Solid Waste Thermal Treatment.

Effect of HCl/SO2/NH3/O2 and mineral sorbents on the partitioning behaviour of heavy metals during the thermal treatment of solid wastes.

Geochemical Distribution and Mineralogy of Heavy Metals in the Gasification Residue of Coal-Waste Activated Carbon-Slurry: Insights into Leaching Behavior

Effect of HCl/SO₂₃/NH₃/O₂₃and mineral sorbents on the partitioning behaviour of heavy metals during the thermal treatment of solid wastes

Simultaneous realization of heavy metal Cd solidification and chloride separation in municipal solid waste incineration fly ash: Mechanism and DFT analysis

Distribution and Modes of Occurrence of Heavy Metals in Opposed Multi-Burner Coal-Water-slurry Gasification Plants

Minimization and stabilization of smelting arsenic-containing hazardous wastewater and solid waste using strategy for stepwise phase-controlled and thermal-doped copper slags

A Review on Mercury Removal in Chemical Looping Combustion of Coal

Thermodynamic and Kinetic Analysis of CuO-CaSO4 Oxygen Carrier in Chemical Looping Gasification

Formation Mechanism and Influencing Factors of Dioxins During Incineration of Mineralized Refuse

Multifaceted evaluation of distribution, occurrence, and leaching features of typical heavy metals in different-sized coal gasification fine slag from Ningdong region, China: A case study

Experimental Investigation on Chemical Looping Co‐gasification of Water Hyacinth and Solid Wastes

Characterization for Disposal of the Residues Produced by Materials Used as Solid Oxygen Carriers in an Advanced Chemical Looping Combustion Process

Red Mud-Based Perovskite Oxygen Carrier Preparation for Chemical Looping Gasification of Municipal Sludge.