Abstract:In recent decades, the need to capture carbon dioxide from industrial gas streams, its storage, and utilization has been justified as a rule by environmental problems. However, the capture of CO 2 from industrial gas mixtures is an independent important issue of chemical technology. The review addresses consideration and analysis of polymer materials for the membrane separation of CO 2 -containing mixtures which are of interest for purification of natural gas, biogas, and flue gases and separation of hydrogen from methane and water gas conversion products. Therefore, gas pairs CO 2 /CH 4 , CO 2 /N 2 , and CO 2 /H 2 are relevant for membrane separation. Promising polymer materials should possess the beneficial combination of CO 2 permeability and selectivity for the gas pair of interest, that is, should be located near the upper bound of the Robeson diagram or be above it. For separation of the first two gas pairs good gas-separation parameters are exhibited by rigid-chain highly permeable glassy polymers of various classes (polymers of intrinsic microporosity, polyimides, polynorbornenes, polybenzoxazoles). For separation of the gas pair CO 2 /N 2 the most advantageous properties are shown by polymers bearing functional groups capable of specific interactions with carbon dioxide (aliphatic polyethers and polyimides with their oligomer moieties, polynorbornenes carrying Si‒O–C and Si–O–Si groups, polymers with ionogenic groups). Thermally stable barrier polymers based on polybenzoxazoles show promise for purification of hydrogen from carbon dioxide at high temperatures.

Polymeric Membranes for CO2 Separation and Capture

Recent Progress on Submicron Gas-Selective Polymeric Membranes

Polymer Materials for Membrane Separation of Gas Mixtures Containing CO2

Facilitated Transport Membranes With Ionic Liquids for CO2 Separations

Recent Advances in Polymer-Inorganic Mixed Matrix Membranes for CO2 Separation

High-Performance Polymers for Membrane Co2/N-2 Separation

Current Research on The Development of Carbon Separation and Capture with Polymeric Membrane: A State of The Art Review

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Research Progress of Polymer Membranes in CO2 Capture

A Review of the Recent Progress in the Development of Nanocomposites Based on Poly(ether- block-amide) Copolymers as Membranes for CO2 Separation

Application of membrane separation technology in postcombustion carbon dioxide capture process

Advancements in Gas Separation for Energy Applications: Exploring the Potential of Polymer Membranes with Intrinsic Microporosity (PIM)

Evaluating the Impact of Functional Groups on Membrane‐mediated CO2/N2 Gas Separations Using a Common Polymer Backbone

Effects of Minor Components in Carbon Dioxide Capture Using Polymeric Gas Separation Membranes

Recent advances of the interfacial polymerization process in gas separation membranes fabrication

Enhanced polyphosphazene membranes for CO2/CH4 separation via molecular design

Recent advances in Poly(ionic liquids) membranes for CO2 separation

Advances in high permeability polymer-based membrane materials for CO 2 separations

Large-scale preparation of composite membranes for CO2 separation via interfacial polymerization: Monomer selection and processing parameter optimization

Thin film composite membranes for postcombustion carbon capture: Polymers and beyond

Highly Polar but Amorphous Polymers with Robust Membrane CO2/N2 Separation Performance