Abstract:The dynamic behaviors of an oscillating bubble (e.g., underwater explosion bubble, cavitation bubble and air-gun bubble) are well known to be strongly dependent on the nature of boundary conditions. Many experiments demonstrated that a high-speed liquid jet is formed away from a free surface or towards a nearby rigid wall. The violent jet impact is believed to be one of the most important mechanisms of cavitation erosion and damages by an underwater explosion. In the previously published literature, the Kelvin impulse based on spherical bubble theory is adopted to determine the gross migration and jet direction of bubbles. However, the underlying mechanisms of jet inception and development are not fully understood and the characteristics of the jet impact still lack exploration. In the present work, both experimental and numerical methods are adopted to do some fundamental studies on bubble dynamics beneath a free surface and near a rigid wall. The electric discharge method is used to generate a bubble and the bubble motion is captured by a high-speed camera. Meanwhile, the boundary integral method is adopted to conduct numerical simulation. The presence of a nearby boundary alters the pressure gradient surrounding the bubble, which has a significant influence on the jet inception. Additionally, a local high-pressure region is generated near the bubble bottom, and it results in a positive feedback mechanism that further accelerates the jet. This mechanism reveals the fact that the jet can speed up to a hundred meters per second within a relatively short time. A localized high-pressure region is caused by the jet impact around the jet tip and the maximum pressure decreases gradually as the rebound of the toroidal bubble. At last, the effect of the dimensionless standoff parameter (defined as $\gamma = d / R_{m}$, where $d$ is the distance between the initial bubble center and the rigid wall and $R_{m}$ is the maximum bubble radius) on the jet impact pressure is discussed.

On the interaction of two cavitation bubbles produced at different times: A jet from the primary bubble

Interaction Between Cavitation Microbubble and Cell: A Simulation of Sonoporation Using Boundary Element Method (Bem)

Experimental Investigation of the Behaviors of Highly Deformed Bubbles Produced by Coaxial Coalescence

Jet Formation During the Gas Penetration Through a Thin Liquid Layer

Cavitation bubble dynamics inside a droplet suspended in a different host fluid

Interaction of cavitation bubbles with the interface of two immiscible fluids on multiple time scales

Modelling of microbubble coalescence

Numerical Investigations on the Jet Dynamics during Cavitation Bubble Collapsing between Dual Particles

Jet dynamics of a cavitation bubble near unequal-sized dual particles

On the Jets Induced by a Cavitation Bubble Near a Cylinder

On the Interaction Between a Pulsating Bubble and a Particle on the Rigid Wall

Bubble Statistics in Shallow Angle Plunging Liquid Jets

Fundamental Study of Microbubble Coalescences Based on Multi-Scale Multiphase Flow Equations(Fluids Engineering)

THE MECHANISM OF JETTING BEHAVIORS OF AN OSCILLATING BUBBLE

Transient Interaction Between a Particle and an Attached Bubble with an Application to Cavitation in Silt-Laden Flow

Interactions of a collapsing laser-induced cavitation bubble with a hemispherical droplet attached to a rigid boundary

Behaviors of Cavitation Bubbles Driven by High-Intensity Ultrasound

Sonoporation from Jetting Cavitation Bubbles

Control of the liquid jet formation through the symmetric and asymmetric collapse of a single bubble generated between two parallel solid plates