Abstract:With the purpose of further investigating the influence of aging on the tensile behaviors of hydroxyl-terminated polybutadiene (HTPB) propellant at low temperatures under dynamic loading, uniaxial tensile stress responses of thermal accelerated aged propellant samples at different temperatures (223–298 K) and strain rates (\(0.40\mbox{--}42.86~\mbox{s}^{-1}\)) were obtained through the use of a new INSTRON testing machine. And scanning electron microscope (SEM) was employed to analyze the microscopic damage of HTPB propellant under the test conditions. Test results indicate that aging can significantly affect the characteristics of the stress-strain curves, mechanical properties and fracture mechanisms of HTPB propellant at low temperatures under dynamic loading. There are three regions in the tensile stress-strain curves of aged propellant when deforming at lower temperatures and the highest strain rate, however, there are five ones for unaged propellant. At lower temperatures and higher strain rates, the strain at maximum tensile stress of the propellant decreases more obviously after aging. Moreover, the variation of mechanical parameters for HTPB propellant with aging time are highly complex due to the occurrence of oxidative cross-linking during aging and the distinct changes of the fracture mechanisms. These variation were reasonably well described with linear model and the improved exponential model in this investigation. The fracture mechanism of aged propellant can change from dewetting, matrix tearing and AP particle fracture to only AP particle fracture with increasing strain rate for the entire test temperature range, and the strain rate for this transition is all at \(4.00\mbox{--}14.29~\mbox{s}^{-1}\). In addition, the microscopic damage of HTPB propellant becomes more severe with the thermal aging time rising, however, this effect is weaker at higher strain rates after long-time thermal aging. Finally, the master curves of typical mechanical parameters for aged HTPB propellant were constructed according to the time-temperature superposition principle (TTSP).

The Influence of Aziridine on the Aging of Composite Solid Rocket Propellant

Molecular Dynamics Study on Aging Mechanism of HTPB Propellants

A Systematic Study on the Failure Behaviors of Aluminum Alloy/composite Bonded Joints Exposed to Various Typical Aging Environments for Automobiles

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

Combustion Performance of Thermally Aged Asphalt Blended with ATH/ZB Flame Retardant

Research on the Thermal Aging Performance of a GAP-Based Polyurethane Elastomer

Tensile Behaviors of Thermal Aged HTPB Propellant at Low Temperatures under Dynamic Loading

Research on the Aging Properties of HTPB Propellant under Vacuum

Test Study on Storage Aging Properties of HTPB Propellants

Aging Behavior of ADN Solid Rocket Propellants and Their Glass-Rubber Transition Characteristics

Experimental Investigation on the Influence of Confining Pressure on Thermal Aged CMDB Propellant

Mechanism of Influence of Active Groups in Binder on Mechanical Properties of HTPB Propellants

Effect of Accelerated Cyclic Aging on the Ballistic Properties of Composite Solid Propellant

Relaxation Properties of the Solid Propellant Based on Hydroxyl-Terminated Polybutadiene

Multiscale damage evolution and fracture for thermal aging energetic material based on mesoscopic observation and molecular dynamics simulation

Chemical Modification Of Hydroxyl-Terminated Polybutadiene And Its Application In Composite Propellants

Research on microscopic structure–activity relationship of AP particle–matrix interface in HTPB propellant

Influence of Aging Conditions on the Mechanical Properties and Flame Retardancy of HIPS Composites

Effect of thermal aging on microstructures of aramid composites

Evolution of structural damage of solid composite propellants under slow heating and effect on combustion characteristics

The effect of Al/oxidizers interfacial structure on the mechanical properties of composite propellants