Abstract:Anti-icing superhydrophobic surfaces have attracted tremendous interests due to their repellency to water and extremely low ice affinity, whereas the weak durability has been the bottleneck for further applications. Surface durability is especially important in long-term exposure to low-temperature and high-humidity environments. In this study, a robust micro-nano-nanowire triple structure-held PDMS superhydrophobic surface was fabricated via a hybrid process: ultrafast-laser-prepared periodic copper microstructures were chemically oxidized, followed by modification of PDMS. The hedgehog-like surface structure was composed of microcones, densely grown nanowires, and tightly combined PDMS. The capillary force difference in micro-nanostructures drove PDMS solutions to distribute evenly, bonding fragile nanowires to form stronger composite cones. PDMS replaced the commonly used fragile fluorosilanes and protected nanowires from breaking, which endowed the surfaces with higher robustness. The ductile PDMS-nanowire composites possessed higher resiliency than brittle nanowires under a load of 1 mN. The surface kept superhydrophobic and ice-resistant after 15 linear abrasion cycles under 1.2 kPa or 60 icing-deicing cycles under -20 degrees C or 500 tape peeling cycles. Under a higher pressure of 6.2 kPa, the contact angle (CA) was maintained above 150 degrees until the abrasion distance exceeded 8 m. In addition, the surface exhibited a rare spontaneously optimized performance in the icing-deicing cycles. The ice adhesion strength of the surface reached its lowest value of 12.2 kPa in the 16th cycle. Evolution of surface roughness and morphology were combined to explain its unique U-shaped performance curves, which distinguished its unique degradation process from common surfaces. Thus, this triple-scale superhydrophobic surface showed a long-term anti-icing performance with high deicing robustness and low ice adhesion strength. The proposed nanostructure-facilitated uniform distribution strategy of PDMS is promising in future design of durable superhydrophobic anti-icing surfaces.

Macroscopic Evidence of the Liquidlike Nature of Nanoscale Polydimethylsiloxane Brushes

Vapor Lubrication for Reducing Water and Ice Adhesion on Polydimethylsiloxane Brushes

Icephobic Durability of Molecular Brush-Structured PDMS Soft Coatings.

Icephobic Surfaces Induced by Interfacial Nonfrozen Water

Nanostructure Explains the Behavior of Slippery Covalently Attached Liquid Surfaces.

In-Situ Observation of Ice-Adhesion Interface Under Tangential Loading: Anti-Icing Mechanism of Hydrophilic PPEGMA Polymer Brush

Crosslinking inert liquidlike polydimethylsiloxane brushes using bis-diazirine chemical insertion for enhanced mechanical durability

Thickness dependence of ice removal stress for a polydimethylsiloxane nanocomposite: Sylgard 184

Super-Slippery Poly(Dimethylsiloxane) Brush Surfaces: From Fabrication to Practical Application

Oil-Infused Superhydrophobic Silicone Material for Low Ice Adhesion with Long-Term Infusion Stability

Ice-phobic Coatings Based on Silicon-Oil-infused Polydimethylsiloxane.

Ultralow Icing Adhesion of a Superhydrophobic Coating Based on the Synergistic Effect of Soft and Stiff Particles

Design and preparation of icephobic PDMS-based coatings by introducing an aqueous lubricating layer and macro-crack initiators at the ice-substrate interface

Self‐Lubricative Organic–Inorganic Hybrid Coating with Anti‐Icing and Anti‐Waxing Performances by Grafting Liquid‐Like Polydimethylsiloxane

Temperature Dependence of the Surface and Volume Hydrophilicity of Hydrophilic Polymer Brushes

Thickness of Nanoscale Poly(Dimethylsiloxane) Layers Determines the Motion of Sliding Water Drops

The Device Using a Polydimethylsiloxane Membrane and the Phase Transition of Water

Super-Hydrophobic PDMS Surface with Ultra-Low Adhesive Force

Molecular origin of slippery behaviour in tethered liquid layers

Wetting on Silicone Surfaces

Micro-Nano-Nanowire Triple Structure-Held PDMS Superhydrophobic Surfaces for Robust Ultra-Long-Term Icephobic Performance.