Abstract:Abstract Existing wireless communications in the sub-6 GHz bands are facing challenges from the growing demand for higher data rates and better quality of services. To satisfy these demands, the fifth generation (5G) mobile network would consider unused spectrum in the millimeter wave (mmWave) spectrum (30-300 GHz). The shortage of bandwidth in the sub-6 GHz band is solved using mmWave technology. Furthermore, mmWave provides significantly higher throughput, data rate, and capacity. Despite the fact that a huge bandwidth is employed, mmWave technology suffers from diffuse scattering from rough materials, path loss, reflection loss, atmospheric attenuation, building penetration loss, and shadowing. These leads to a decrease in the transmitted signal power. Therefore, a reliable and accurate channel model is important in the mmWave bands, particularly for the indoor environment. Moreover, by using technologies like beam-forming and others coupled with mmWave, the listed impairments are minimized. In this work, we analyze the performance of different path loss models (CI, free space, and two rays) at 38, 60, and 73 GHz carrier frequencies in terms of path loss in terms of separation distance between transmitter and receiver. Additionally, we have evaluated the performance of the path loss with respect to the break point distance to enhance the received signal power and throughput. We have also done analysis of the directional power delay profile with received signal power, path loss and path loss exponent (PLE) at 38 GHz and 73 GHz mmWave bands for both LOS and NLOS by using uniform linear array (ULA) 2X2 and 64x16 antenna configurations using the channel model simulator (NYUSIM). The simulation results show the performance of different path loss models in the mmWave and sub 6 GHz bands. Path loss in the close-in model is larger than that of free space and two raypath loss models.

The Performance Measurement of the 60GHz mmWave Module for IoRL Network

mmWave Indoor Channel Measurement Campaign for 5G New Radio Indoor Broadcasting

Measurement Campaign on 5G Indoor Millimeter Wave and Visible Light Communications Multi Component Carrier System

Measurement-based Channel Modeling for Mmwave Wireless Links in Enclosed Server Platforms

Resource Management for Millimeter-Wave Ultra-Reliable and Low-Latency Communications

Performance Evaluation and Analysis of Millimeter Wave Communication System

Performance analysis of mmWave radio propagations in an indoor environment for 5G networks

26‐GHz Testbed performance evaluation using system EVM characterization for 5G communication

Channel Measurement, Simulation, and Analysis for High-Speed Railway Communications in 5G Millimeter-Wave Band

Experimental Investigation of 5G Positioning Performance Using a mmWave Measurement Setup

An In-Depth Study of Uplink Performance of 5G Mmwave Networks

System performance evaluation for millimeter wave wireless communication

Millimeter Wave Channel Measurements and Implications for PHY Layer Design

Transport Layer Performance in 5G mmWave Cellular

Indoor Measurement and Characterization of Wireless MIMO Channel at 6.0-6.4Ghz

Exploring Upper-6GHz and mmWave in Real-World 5G Networks: A Direct on-Field Comparison

74 GHz Millimeter-Wave Long-Range Channel Measurements for Backhaul Communications: Sounding System and Propagation Characterization

Outdoor-to-Indoor Channel Measurement and Coverage Analysis for 5G Typical Spectrums

Multi-Frequency Multi-Scenario Millimeter Wave MIMO Channel Measurements and Modeling for B5G Wireless Communication Systems

A Channel Measurement Campaign for mmWave Communication in Industrial Settings

LoRa, Zigbee and 5G Propagation and Transmission Performance in an Indoor Environment at 868 MHz