Abstract:Highlights • RGO@N-ZnO nanocomposite was synthesized by a Hummer's method followed by solvothermal method. • RGO@N-ZnO nanocomposite exhibits high specific surface area 141.2 m 2 g −1 . • Nanocomposite achieved over 99 % inactivation of E.coli , tannery waste water at 30 min of under visible light irradiation. • More the 95 % of Methylene Blue dye degradation at 45 min under visible light irradiation. • The RGO@N-ZnO nanocomposites manifest superior photocatalytic activity, cost effective and improved stability. Background Globally, water resources are becoming scarce, and there is an urgent need to develop sustainable and energy efficient methods of water and wastewater treatment, where photocatalysis is emerging as a promising method for water purification. Thus, the design of photocatalysts that is easy to recover, eco-friendly, cost-effective and reduce the environmental footprint. Methods Present investigation, the RGO@N-ZnO nanocomposite photocatalyst was fabricated through the solvothermal method and it was characterized by various physio-chemical methods such as FE-SEM, RAMAN, HR-TEM, BET, EPR, EIS, PL and XPS etc., analyses. The photocatalytic activity of the photocatalyst was examined against Escherichia coli ( E. coli ), tannery wastewater and Methylene Blue (MB) dye degradation under visible light irradiation in a slurry photoreactor. Significant findings The RGO@N-ZnO nanocomposite has a high specific surface area of 141.2 m 2 g −1 . The results of electron spin resonance (ESR) spectra and free radicals trapping experimental studies confirmed that e − , • OH and • O 2 − radicals serve as the primary active species in photocatalytic disinfection. It has been observed that, after 30 min and 45 min of visible light irradiation, 100 mg/100 mL RGO@N-ZnO nanocomposite destroyed more than 99 % of E. coli present in the tannery wastewater and more than 95 % of Methylene Blue (MB) dye molecules were degraded. Reusability tests showed that, after four cycles of use RGO@N-ZnO retained more than 90 % of its photocatalytic activity with minimal loss. Thus, these findings manifest the RGO@N-ZnO nanocomposite is a potential photocatalyst due to its high photocatalytic efficiency, low-cost and is suitable for environmental remedial applications. Graphical abstract Download : Download high-res image (481KB) Download : Download full-size image

Visible-light Responsive PDI/rGO Composite Film for the Photothermal Catalytic Degradation of Antibiotic Wastewater and Interfacial Water Evaporation

Fabrication of a Perylene Tetracarboxylic Diimide-Graphitic Carbon Nitride Heterojunction Photocatalyst for Efficient Degradation of Aqueous Organic Pollutants

Rational construction of visible-light-driven perylene diimides/Fe2O3@C derived from MIL-88A (Fe) heterojunction with S-scheme electron transfer pathway to activate peroxymonosulfate for degradation of antibiotics

Photocatalytic activation of peroxydisulfate by UV-LED through rGO/g-C3N4/SiO2 nanocomposite for ciprofloxacin removal: Mineralization, toxicity, degradation pathways, and application for real matrix

Visible‐Light‐Induced Rapid Elimination of Antibiotic Resistance Contaminations Using Graphitic Carbon Nitride Tailored with Carrier Confinement Domains

Visible Light-Driven Degradation of Ofloxacin by Graphene Oxide-Supported Titania/zirconia Ternary Nanocomposites

Fabrication of Bi/BiOCOOH/PVDF with improved photocatalytic activity for the degradation of ciprofloxacin

One-step hydrothermal synthesis of BiVO4/TiO2/RGO composite with effective photocatalytic performance for the degradation of ciprofloxacin

Enhanced Peroxymonosulfate activation via Bi 12 CoO 20 /rGO with Near‐Infrared Photothermal Response for Antibiotics Degradation

Construction of RGO@N-ZnO nanocomposite photocatalyst for disinfection of microbes and dye degradation under visible light irradiation

Solar Light Responsive Poly(vinyl Alcohol)-Assisted Hydrothermal Synthesis of Immobilized TiO2/Ti Film with the Addition of Peroxymonosulfate for Photocatalytic Degradation of Ciprofloxacin in Aqueous Media: A Mechanistic Approach

Rational construction of tetraphenylporphyrin/bismuth oxybromide nanocomposite with accelerated interfacial charge transfer for promoted visible-light-driven degradation of antibiotics

Hydrothermal synthesis of Pd doped rGO/ZnO nanocomposite for effective CBR dye degradation and antibacterial activities

Photocatalytic performance with electrochemical effects for ZnO/Graphene Quantum Dots/CdSe nanocomposite toward ciprofloxacin antibiotics and paracetamol degradation under visible light

Insight into peroxymonosulfate assisted photocatalysis over Fe2O3 modified TiO2/diatomite composite for highly efficient removal of ciprofloxacin

Efficient photocatalytic degradation of emerging ciprofloxacin under visible light irradiation using BiOBr/carbon quantum dot/saponite composite

Super hydrophilic composite membrane with photocatalytic degradation and self-cleaning ability based on LDH and g-C3N4

Ultrasonic-assisted synthesis of CaCu3Ti4O12/reduced graphene oxide composites for enhanced photocatalytic degradation of pharmaceutical products: Ibuprofen and Ciprofloxacin

Rational Engineering of Nanostructured NiS/GO/PVA for Efficient Photocatalytic Degradation of Organic Pollutants

Fabrication and characterization of pectin-graphene oxide-magnesium ferrite-zinc oxide nanocomposite for photocatalytic degradation of diclofenac in an aqueous solution under visible light irradiation

Performance Optimization of CdS Precipitated Graphene Oxide/polyacrylic Acid Composite for Efficient Photodegradation of Chlortetracycline