Abstract:Abstract Hydraulic flow, electrical flow and the passage of elastic waves through porous media are all linked by electrokinetic processes. In its simplest form, the passage of elastic waves through the porous medium causes fluid to flow through that medium and that flow gives rise to an electrical streaming potential and electrical counter-current. These processes are frequency-dependent and governed by coupling coefficients which are themselves frequency-dependent. The link between fluid pressure and fluid flow is described by dynamic permeability, which is characterised by the hydraulic coupling coefficient ( C hp ). The link between fluid pressure and electrical streaming potential is characterised by the streaming potential coefficient ( C sp ). While the steady-state values of such coefficients are well studied and understood, their frequency dependence is not. Previous work has been confined to unconsolidated and disaggregated materials such as sands, gravels and soils. In this work, we present an apparatus for measuring the hydraulic and streaming potential coefficients of high porosity, high permeability consolidated porous media as a function of frequency. The apparatus operates in the range 1 Hz to 2 kHz with a sample of 10 mm diameter and 5–30 mm in length. The full design and validation of the apparatus are described together with the experimental protocol it uses. Initial data are presented for three samples of Boise sandstone, which present as dispersive media with the critical transition frequency of 918.3 ± 99.4 Hz. The in-phase and in-quadrature components of the measured hydraulic and streaming potential coefficients have been compared to the Debye-type dispersion model as well as theoretical models based on bundles of capillary tubes and porous media. Initial results indicate that the dynamic permeability data present an extremely good fit to the capillary bundle and Debye-type dispersion models, while the streaming potential coefficient presents an extremely good fit to all of the models up to the critical transition frequency, but diverges at higher frequencies. The streaming potential coefficient data are best fitted by the Pride model and its Walker and Glover simplification. Characteristic pore size values calculated from the measured critical transition frequency fell within 1.73% of independent measures of this parameter, while the values calculated directly from the Packard model showed an underestimation by about 12%.

A Framework for Pore‐Scale Simulation of Effective Electrical Conductivity and Permittivity of Porous Media in the Frequency Range from 1 Mhz to 1 GHz

Numerical and Theoretical Simulations of the Dielectric Properties of Porous Rocks

Numerical Simulation for the Effective Conductivity of Composite Medium in High Frequency

Experimental Measurement of Frequency-Dependent Permeability and Streaming Potential of Sandstones

The Evaluation of Rock Permeability with Streaming Current Measurements

From computed microtomography images to resistivity index calculations of heterogeneous carbonates using a dual-porosity pore-network approach: influence of percolation on the electrical transport properties

Quantitative Evaluation of the Effect of Pore Fluids Distribution on Complex Conductivity Saturation Exponents

Effects of Material Texture and Packing Density on the Interfacial Polarization of Granular Soils

Numerical Simulation on Hydromechanical Coupling in Porous Media Adopting Three-Dimensional Pore-Scale Model.

Modeling the Nonlinear–To–Linear Relationship Between Bulk and Pore Water Electrical Conductivity in Saturated Porous Media Using a Padé Approximant

Numerical Experiments of Pore Scale for Electrical Properties of Saturated Digital Rock

Numerical Simulation Research on Seepage Mechanism in Pore-scale Deformable Porous Media

Pore‐Scale Reconstruction and Simulation of Non‐Darcy Flow in Synthetic Porous Rocks

Numerical Analysis of Seismoelectric Conversion in Stratified Low-Permeability Porous Rocks

Modelling the Low-Frequency Electrical Properties of Pyrite-Bearing Reservoir Sandstones

An Effective Medium Approach to Modelling the Pressure-Dependent Electrical Properties of Porous Rocks

Modeling of Electro‐osmosis of Dilute Electrolyte Solutions in Silica Microporous Media

Determination of Effective Grain Geometry for Electrical Modeling of Sedimentary Rocks

A data-driven framework for permeability prediction of natural porous rocks via microstructural characterization and pore-scale simulation

Pore-scale Electrical Numerical Simulation and New Saturation Model of Fractured Tight Sandstone

Numerical Simulation of the Influence of Pore Structure on Resistivity, Formation Factor and Cementation Index in Tight Sandstone