Abstract:The martensitic transformation between the high-temperature face-centered cubic (FCC) phase and the low-temperature body-centered cubic (BCC) phase in iron-based alloys has been studied for years, which plays a critical role in controlling microstructures and hence properties of the alloys. Generally, the BCC structure martensitic phase forms from the FCC parent phase, involving a collective motions of atoms over a distance less than the interatomic distance in the vicinity of the interphase boundary. Thus the structure of interphase boundary separating the FCC and BCC phases is the key characteristics to quantitatively understanding the mechanism and kinetics of martensitic transformation. Due to the difficulty in observing the atomic motions taking place at a velocity as high as the speed of sound, the experimental investigation on the migration of FCC/BCC interphase boundary during the transformation is as yet limited. Noteworthily, molecular dynamics (MD) simulation has been applied to studying the martensitic transformation, in particular for investigating the mobility of the FCC/BCC interphase boundary in iron. However, in most of the MD studies the atomistically planar interfaces of {111} FCC // {110} BCC are considered as the initial configuration of the interphase boundary between FCC and BCC phases, which is in contradiction to the high-resolution TEM observations. In fact, the FCC/BCC interphase boundary, which is known as the macroscopic habit plane, is a semi-coherent interface consisting of several steps and terrace planes on an atomic scale. In the present work, the atomic configuration of a terrace-step FCC/BCC interphase boundary of iron is built in terms of the topological model. The MD simulation is conducted to clarify the mechanism of interphase boundary migration in the FCC-to-BCC transformation. The results show that the FCC/BCC boundary migrates along its normal at the expense of FCC phase as a result of the lateral motions of the transformation dislocations. Meanwhile, the interphase boundary maintains the stable terrace-step structure during the transformation. Further examinations reveal that the transformation dislocations move steadily at a velocity as high as (2.8 ± 0.2) × 10 3 m/s, affecting the migration of the interphase boundary with a constant velocity of about (4.4 ± 0.3) × 10 2 m/s. The effective migration velocity of FCC/BCC interface exhibits dynamic properties consistent with the characteristic features commonly observed in a displacive martensitic transformation. Additionally, the motion of transformation dislocations gives rise to the macroscopic shape strain composed of a shear component \begin{document}$ {\varGamma _{{\rm{yz}}}} = 0.349$\end{document} parallel to the boundary and a dilatation \begin{document}$ {\varGamma _{{\rm{zz}}}} = 0.053$\end{document} normal to the boundary in the MD simulation, which is close to the crystallographic calculations by the topological model.

The Strain-Induced Martensitic Phase Transformation of Fe–C Alloys Considering C Addition: A Molecular Dynamics Study

The Mechanism of Structure Phase Transition from Α Fe to Ε Fe under Uniaxial Strain: First-principles Calculations

Deformation-induced Phase Transformation and Twinning in Fe and Fe–C Alloys

Atomic-scale study of the mechanical properties of dual-phase fcc/bcc crystallites: influences of alloying elements and phase boundaries

Unveiling the Mechanism of the Carbon Ordering and Martensite Tetragonality in Fe–C Alloys Studied Via Deep-Potential Molecular Dynamics Simulations

Coordinated Deformation Behavior of Cu-10wt.%FeC Alloys Through Controlling Structure, Morphology and Distribution of Fe–C Phases

Positioning of interstitial carbon atoms in the deformed Fe-C system

Microstructures and Mechanical Behavior of Fe-18Mn-10Al-(0.8-1.2)C Steels

Superior Strain-Hardening by Deformation-Induced Nano-Hcp Martensite in Fe–Mn–Si–C High-Manganese Steel

Composition-dependent slip planarity in mechanically-stable face centered cubic complex concentrated alloys and its mechanical effects

Tensile deformation behavior analysis of low density Fe–18Mn–10Al– x C steels

Deformation Mechanism of Amorphous/crystalline Phase-Separated Alloys: A Molecular Dynamics Study

Cubic Martensite in High Carbon Steel

Abnormal Orientation Relation Between Fcc and Hcp Structures Revealed in a Deformed High Manganese Steel

Molecular dynamics simulation of migration behavior of FCC-BCC atomic terrace-step phase boundary in iron-based alloy

Effects of Precipitation and Strain-Induced Martensitic Transformation of Fe-C Phases on the Mechanical Properties of Cu-Fe-C Alloy

Mechanisms of Martensitic Phase Transformations in Body-Centered Cubic Structural Metals and Alloys: Molecular Dynamics Simulations

Effect of C Content on Microstructure and Tensile Properties of As-Cast CoCrFeMnNi High Entropy Alloy

Effect of distribution of carbon and alloying element on martensite transformation in metastable austenitic manganese steel

Deformation Mechanisms of Mechanically Induced Phase Transformations in Iron

Unexpected Deformation-Induced Martensitic Phase Transformations in Ni-Cr and Ni-Cr-Fe Alloys