Tellurene Nanoflake-Based NO 2 Sensors with Superior Sensitivity and a Sub-Parts-per-Billion Detection Limit
Heping Cui,Kai Zheng,Zhongjian Xie,Jiabing Yu,Xiangyi Zhu,Hao Ren,Zeping Wang,Feng Zhang,Xiandong Li,Lu-Qi Tao,Han Zhang,Xianping Chen
DOI: https://doi.org/10.1021/acsami.0c15964
2020-10-05
Abstract:Industrial production, environmental monitoring, and clinical medicine put forward urgent demands for high-performance gas sensors. Two-dimensional (2D) materials are regarded as promising gas-sensing materials owing to their large surface-to-volume ratio, high surface activity, and abundant surface-active sites. However, it is still challenging to achieve facilely prepared materials with high sensitivity, fast response, full recovery, and robustness in harsh environments for gas sensing. Here, a combination of experiments and density functional theory (DFT) calculations is performed to explore the application of tellurene in gas sensors. The prepared tellurene nanoflakes via facile liquid-phase exfoliation show an excellent response to NO<sub>2</sub> (25 ppb, 201.8% and 150 ppb, 264.3%) and an ultralow theory detection limit (DL) of 0.214 ppb at room temperature, which is excellent compared to that of most reported 2D materials. Furthermore, tellurene sensors present a fast response (25 ppb, 83 s and 100 ppb, 26 s) and recovery (25 ppb, 458 s and 100 ppb, 290 s). The DFT calculations further clarify the reasons for enhanced electrical conductivity after NO<sub>2</sub> adsorption because of the interfacial electron transfer from tellurene to NO<sub>2</sub>, revealing an underlying explanation for tellurene-based gas sensors. These results indicate that tellurene is eminently promising for detecting NO<sub>2</sub> with superior sensitivity, favorable selectivity, an ultralow DL, fast response-recovery, and high stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c15964?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c15964</a>.Details of technological process diagrams of fabricating tellurene gas sensors; the photograph of red light irradiating on tellurene solution; the three-dimensional AFM image of the tellurene nanosheet; EDS elemental mapping of tellurene flakes and EDS spectrum of tellurene on carbon film-coated copper grids; the optical microscopy image of tellurene nanoflakes on the interdigital electrode; the transient response of tellurene sensors detecting NO<sub>2</sub> under different NO<sub>2</sub> concentrations of 25 ppb-2 ppm level in dry air; response and recovery time of the tellurene sensor under 25 ppb NO<sub>2</sub>; resistance responses of the tellurene sensor in 40 ppm CO<sub>2</sub>, 20 ppm NH<sub>3</sub>, and 20 ppm SO<sub>2</sub>; the response of device #1 and #2 detecting NO<sub>2</sub> under different NO<sub>2</sub> concentrations of 25–150 ppb level in dry air and the related fitted curve of the response factor with the NO<sub>2</sub> concentration; the resistance changes of the tellurene sensor at a NO<sub>2</sub> concentration of 100 ppb level in dry air at room temperature; response of tellurene sensors to 25 ppb NO<sub>2</sub> at 100 °C; adsorption structures for DFT calculations; adsorption energy, charge transfer, CDD and ELF of gas molecules adsorbed on tellurene; comparison between previously reported NO<sub>2</sub> sensors and this work; schematic diagram of the gas-sensing test system (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15964/suppl_file/am0c15964_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology