Abstract:Aqueous zinc-ion hybrid supercapacitors (ZHSCs) are considered as promising candidates for flexible wearable energy storage devices. The key challenge is to develop carbon cathodes with high hydrophilicity, good flexibility and cycle stability. This paper reports a facile route to synthesize flexible oxygen-enriched carbon fiber films with super-hydrophilic character. ZHSCs with such carbon fiber cathodes achieve excellent energy and power densities of 97.7 Wh kg−1/9.9 kW kg−1 with a long-term cycling stability (retention rate of 81% after 50,000 cycles). According to experiment analysis and theoretical simulations, it is discovered that the oxygen-containing functional groups on carbon fibers not only significantly improve their wettability, but also greatly facilitate the chemical adsorption of zinc ions and result in the enhanced capacities. In addition, those cathodes can operate well and stably not only under a high load of 20 mg cm−2 and a bending of 180°, but also in a quasi-solid-state device, promising for wearable electronic applications.

What problem does this paper attempt to address?

The problem this paper attempts to address is the development of a carbon-based cathode material with high hydrophilicity, good flexibility, and cycling stability for zinc-ion hybrid supercapacitors (ZHSCs). Specifically, the authors aim to improve the energy density, power density, and long-term cycling stability of ZHSCs by synthesizing an oxygen-rich, superhydrophilic, flexible porous carbon nanofiber membrane (OPCNF). Additionally, the study explores the mechanism of oxygen functional groups in the chemical adsorption of zinc ions and how these functional groups enhance the performance of electrode materials. ### Main Issues: 1. **Improving the hydrophilicity of carbon-based cathode materials**: Traditional carbon-based materials are usually hydrophobic, which increases the resistance at the electrode/electrolyte interface and affects the adsorption of zinc ions and other anions. 2. **Enhancing the flexibility of carbon-based cathode materials**: To meet the demands of wearable electronic devices, cathode materials need to have good mechanical flexibility. 3. **Improving the cycling stability of carbon-based cathode materials**: Long-term charge-discharge cycles can lead to performance degradation of electrode materials, so it is necessary to develop materials with long-term cycling stability. 4. **Optimizing the electrochemical performance of carbon-based cathode materials**: By introducing oxygen functional groups, the electrochemical performance of the materials, including energy density and power density, can be improved. ### Solutions: - **Synthesis Method**: An oxygen-rich, superhydrophilic, flexible porous carbon nanofiber membrane (OPCNF) was prepared through electrospinning and nitric acid-assisted oxidation techniques. - **Optimizing Oxidation Time**: By optimizing the nitric acid oxidation time (20 hours), the optimal OPCNF-20 sample was obtained, which not only has a near-zero water contact angle and good conductivity but also combines electric double-layer capacitance and pseudocapacitance effects. - **Theoretical Simulation**: A series of in-situ characterizations and density functional theory (DFT) calculations were conducted to reveal the reaction mechanism between oxygen functional groups and zinc ions. ### Experimental Results: - **Electrochemical Performance**: The optimized OPCNF-20 provided a high reversible specific capacity of 136.4 mAh g⁻¹ at 0.1 A g⁻¹ and maintained 81% capacity retention after 50,000 cycles at 5 A g⁻¹. - **Practical Application Potential**: OPCNF-20 demonstrated stable performance under high loading (20 mg cm⁻²), different bending angles (0° to 180°), and in quasi-solid-state devices, showing its potential for application in wearable electronic devices. In summary, this paper successfully addresses the key issues of carbon-based cathode materials in zinc-ion hybrid supercapacitors by synthesizing and optimizing an oxygen-rich, superhydrophilic, flexible porous carbon nanofiber membrane, providing important technical support for their application in wearable electronic devices.

Super hydrophilic carbon fiber film for freestanding and flexible cathodes of zinc-ion hybrid supercapacitors

A Hollow-Shaped ZIF-8-N-Doped Porous Carbon Fiber for High-Performance Zn-Ion Hybrid Supercapacitors

Boosting the Capacitance of Aqueous Zinc-Ion Hybrid Capacitors by Engineering Hierarchical Porous Carbon Architecture

Sewable and Cuttable Flexible Zinc-Ion Hybrid Supercapacitor Using a Polydopamine/Carbon Cloth-Based Cathode

Hierarchical Porous Carbon Guided by Constructing Organic-Inorganic Interpenetrating Polymer Networks to Facilitate Performance of Zinc Hybrid Supercapacitors

Nitrogen-doped hollow carbon nanoboxes in zwitterionic polymer hydrogel electrolyte for superior quasi-solid-state zinc-ion hybrid supercapacitors

Flexible Quasi‐Solid‐State High‐Performance Aqueous Zinc Ion Hybrid Supercapacitor with Water‐in‐Salt Hydrogel Electrolyte and N/P‐Dual Doped Graphene Hydrogel Electrodes

A low cost, wide temperature range, and high energy density flexible quasi-solid-state zinc-ion hybrid supercapacitors enabled by sustainable cathode and electrolyte design

Organohydrogel electrolyte-based flexible zinc-ion hybrid supercapacitors with dendrite-free anode, broad temperature adaptability and ultralong cycling life

Flexible Zinc-Ion Hybrid Supercapacitor with High Areal Capacitance Based on a Redox Iodide Ion Electrolyte and High Mass Loading Cathode

A flexible and stable zinc-ion hybrid capacitor with polysaccharide-reinforced cross-linked hydrogel electrolyte and binder-free carbon cathode

A flexible axial Zn ion hybrid supercapacitor with high surface capacitance and long cycle life

3D porous H-Ti3C2T films as free-standing electrodes for zinc ion hybrid capacitors

Structural and surface engineering promotes Zn-ion energy storage capability of commercial carbon cloth

Natural Polysaccharide Strengthened Hydrogel Electrolyte and Biopolymer Derived Carbon for Durable Aqueous Zinc Ion Storage

Metal-organic framework derived zinc and nitrogen co-doped porous carbon materials for high performance zinc-ion hybrid supercapacitors

O, N‐Codoped, Self‐Activated, Holey Carbon Sheets for Low‐Cost And High‐Loading Zinc‐Ion Supercapacitors

Great Enhancement of Carbon Energy Storage through Narrow Pores and Hydrogen-Containing Functional Groups for Aqueous Zn-Ion Hybrid Supercapacitor

Synergistic effects of an artificial carbon coating layer and Cu2+-electrolyte additive for high-performance zinc-based hybrid supercapacitors

Towards High-Energy and Anti-Self-Discharge Zn-Ion Hybrid Supercapacitors with New Understanding of the Electrochemistry

All‐Climate Stretchable Dendrite‐Free Zn‐Ion Hybrid Supercapacitors Enabled by Hydrogel Electrolyte Engineering