Abstract:Proton exchange membranes (PEMs) have emerged as very promising membranes for automotive applications because of their notable proton conductivity at low temperatures. These membranes find extensive utilization in fuel cells. Several polymeric materials have been used, but their application is constrained by their expense and intricate synthetic processes. Affordable and efficient synthetic methods for polymeric materials are necessary for the widespread commercial use of PEM technology. The polymeric combination of hexachlorocyclotriphosphazene (HCCP) and 4,4-diamino-2,2-biphenyldisulfonic acid facilitated the synthesis of PP-(PhSO3H)2, a polyphosphazene with built-in -SO3H moieties. Characterization revealed that it was a porous organic polymer with high stability. PP-(PhSO3H)2 exhibited a proton conductivity of up to 8.24 × 10-2 S cm-1 (SD = ±0.031) at 353 K under 98% relative humidity (RH), which was more than two orders of magnitude higher than that of its -SO3H-free analogue, PP-(Ph)2 (2.32 × 10-4 S cm-1) (SD = ±0.019) under identical conditions. Therefore, for application in a PEM fuel cell, PP-(PhSO3H)2-based matrix-mixed membranes (PP-(PhSO3H)2-MMMs) were fabricated by mixing them with polyacrylonitrile (PAN) in various ratios. The proton conductivity could reach up to 6.11 × 10-2 S cm-1 (SD = ±0.0048) at 353 K and 98%RH, when the weight ratio of PP-(PhSO3H)2 : PAN was 3 : 1, the value of which was comparable with those of commercially available electrolytes used in PEM fuel cells. PP-(PhSO3H)2-MMM (3 : 1) had an extended lifetime of reusability. Using phosphazene and bisulfonated multiple-amine modules as precursors, we demonstrated that a porous organic polymer with a highly effective proton-conductive matrix-mixed membrane for PEM fuel cells could be produced readily by an intuitive polymeric reaction.

Mixed Matrix Proton Exchange Membranes for Fuel Cells: State of the Art and Perspectives

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Proton Conductivity of Composite Polyelectrolyte Membranes with Metal‐Organic Frameworks for Fuel Cell Applications

Advances in Proton-Exchange Membranes for Fuel Cells: an Overview on Proton Conductive Channels (Pccs)

Mixed-Matrix Membranes Containing Porous Materials for Gas Separation: from Metal–Organic Frameworks to Discrete Molecular Cages

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Proton Exchange Membrane Fuel Cells: Focused on Organic-Inorganic Nanocomposite Membranes

Advanced Porous Materials in Mixed Matrix Membranes

The strategy of micropore confinement via organic macrocyclic cavities for designing novel high-performance proton exchange membranes

Proton exchange membranes for high temperature proton exchange membrane fuel cells: Challenges and perspectives

The advances development of proton exchange membrane with high proton conductivity and balanced stability in fuel cells

The microporous layer in proton exchange membrane fuel cells, from transport mechanism to structural design

Proton Exchange Membranes Based on Polycarbonate Track Etched (PCTE) Membrane for Direct Methanol Fuel Cells

Perspectives on Membrane Development for High Temperature Proton Exchange Membrane Fuel Cells

Construction of Highly Conductive Cross-Linked Polybenzimidazole-Based Networks for High-Temperature Proton Exchange Membrane Fuel Cells

Branched Polymer Materials as Proton Exchange Membranes for Fuel Cell Applications

Advanced Materials and Fabricating Approaches for Proton Exchange Membrane Fuel Cells

Design and assembly of conductive covalent organic frameworks for proton exchange membrane application

Fuel 109-New Proton Conductive Composite Materials with Inorganic and Styrene Grafted and Sulfonated Vdf/Ctfe Fluoropolymers

High-performance polybenzimidazole composite membranes doped with nitrogen-rich porous nanosheets for high-temperature fuel cells

A review of the microporous layer in proton exchange membrane fuel cells: Materials and structural designs based on water transport mechanism