The Physics of Particle Formation and Deposition During Breathing.

Lidia Morawska,Giorgio Buonanno

DOI: https://doi.org/10.1038/s42254-021-00307-4

IF: 36.273

2021-01-01

Nature Reviews Physics

Abstract:In every breath, humans take in particles that may be deposited on the respiratory tract and exhale particles that may contain pathogens. Lidia Morawska and Giorgio Buonanno explain how physics advances are needed to understand these processes.

What problem does this paper attempt to address?

The Physics of Respiratory Particle Generation, Fate in the Air, and Inhalation

Lidia Morawska,Giorgio Buonanno,Alex Mikszewski,Luca Stabile

DOI: https://doi.org/10.1038/s42254-022-00506-7

IF: 36.273

2022-01-01

Nature Reviews Physics

Abstract:In this Perspective on the physics of particle generation in the respiratory tract, fate in the air upon exhalation and the physics of inhalation, the authors conclude that the general understanding of the entire process is rudimentary, and many open questions remain. Given that breathing is one of the most fundamental physiological functions, there is an urgent need to broaden our understanding of the fluid dynamics that governs it. There would be many benefits from doing so, including a better assessment of respiratory health, a basis for more precise delivery of pharmaceutical drugs for treatment, and the understanding and potential minimization of respiratory infection transmission. We review the physics of particle generation in the respiratory tract, the fate of these particles in the air on exhalation and the physics of particle inhalation. The main focus is on evidence from experimental studies. We conclude that although there is qualitative understanding of the generation of particles in the respiratory tract, a basic quantitative knowledge of the characteristics of the particles emitted during respiratory activities and their fate after emission, and a theoretical understanding of particle deposition during inhalation, nevertheless the general understanding of the entire process is rudimentary, and many open questions remain.
Deposition of Droplets from the Trachea or Bronchus in the Respiratory Tract During Exhalation: A Steady-State Numerical Investigation

Yong Guo,Jianjian Wei,Cuiyun Ou,Li Liu,Sasan Sadrizadeh,Tao Jin,Lingling Tang,Yinping Zhang,Yuguo Li

DOI: https://doi.org/10.1080/02786826.2020.1772459

2020-01-01

Aerosol Science and Technology

Abstract:Respiratory droplets are bioaerosols that originate from the respiratory tract. Knowing their deposition characteristics during exhalation would facilitate the understanding of the source of large respiratory droplets and their importance in the spread of respiratory infectious diseases. In this study, computational fluid dynamics is used to simulate the motion and deposition of droplets released from either trachea or bronchi in a realistic reconstruction of the human respiratory tract. Influences of airflow structures and locations of droplet generation on droplet deposition are studied, and droplets with diameters between 1 and 50 mu m are examined. The deposition of droplets is found to be influenced mainly by the droplet diameter and the flow rate of exhalation. The number of droplets released from the trachea or bronchi that can escape into the environment decreases as the flow rate increases. When the flow rate is low (10 L/min), the critical diameter of droplets generated in the lower respiratory system that can escape into the air is approximately 12 mu m, but this diameter is approximately 5 mu m when the flow rate is medium (30 to 60 L/min) or large (90 L/min). The larynx is the dominant site of deposition for droplets smaller than the critical diameter, while trachea and bronchus are more important locations that account for the deposition of larger droplets. This study indicates that the lower respiratory tract is an important source of fine droplets (<5 mu m) in indoor environments, and larger droplets probably originate from the upper respiratory tract, which needs further investigation. Copyright (c) 2020 American Association for Aerosol Research
Aerosol deposition and airflow dynamics in healthy and asthmatic human airways during inhalation

Wei-Hsin Chen,Che-Ming Chang,Justus Kavita Mutuku,Su Shiung Lam,Wen-Jhy Lee

DOI: https://doi.org/10.1016/j.jhazmat.2021.125856

IF: 13.6

2021-08-01

Journal of Hazardous Materials

Abstract:Inhalation of aerosols such as pharmaceutical aerosols or virus aerosol uptake is of great concern to the human population. To elucidate the underlying aerosol dynamics, the deposition fractions (DFs) of aerosols in healthy and asthmatic human airways of generations 13-15 are predicted. The Navier-stokes equations governing the gaseous phase and the discrete phase model for particles' motion are solved using numerical methods. The main forces responsible for deposition are inertial impaction forces and complex secondary flow velocities. The curvatures and sinusoidal folds in the asthmatic geometry lead to the formation of complex secondary flows and hence higher DFs. The intensities of complex secondary flows are strongest at the generations affected by asthma. The DF in the healthy airways is 0%, and it ranges from 1.69% to 52.93% in the asthmatic ones. From this study, the effects of the pharmaceutical aerosol particle diameters in the treatment of asthma patients can be established, which is conducive to inhibiting the inflammation of asthma airways. Furthermore, with the recent development of COVID-19 which causes pneumonia, the predicted physics and effective simulation methods of bioaerosols delivery to asthma patients are vital to prevent the exacerbation of the chronic ailment and the epidemic.

environmental sciences,engineering, environmental
The Mechanism of Breath Aerosol Formation

Graham Richard Johnson,Lidia Morawska

DOI: https://doi.org/10.1089/jamp.2008.0720

2009-01-01

Abstract:Background: Aerosol production during normal breathing is often attributed to turbulence in the respiratory tract. That mechanism is not consistent with a high degree of asymmetry between aerosol production during inhalation and exhalation. The objective was to investigate production symmetry during breathing.Methods: The aerosol size distribution in exhaled breath was examined for different breathing patterns including normal breathing, varied breath-holding periods, and contrasting inhalation and exhalation rates. The aerosol droplet size distribution measured in the exhaled breath was examined in real time using an aerodynamic particle sizer.Results and Conclusions: The dependence of the particle concentration decay rate on diameter during breath holding was consistent with gravitational settling in the alveolar spaces. Also, deep exhalation resulted in a four-to sixfold increase in concentration, and rapid inhalation produced a further two-to threefold increase in concentration. In contrast, rapid exhalation had little effect on the measured concentration. A positive correlation of the breath aerosol concentration with subject age was observed. The results were consistent with the breath aerosol being produced through fluid film rupture in the respiratory bronchioles in the early stages of inhalation and the resulting aerosol being drawn into the alveoli and held before exhalation. The observed asymmetry of production in the breathing cycle with very little aerosol being produced by exhalation is inconsistent with the widely assumed turbulence-induced aerosolization mechanism.
A review on numerical studies of airflow dynamics and particle deposition in human respiratory system

Hao Jing,Xinguang Cui

DOI: https://doi.org/10.1016/j.partic.2024.04.006

IF: 3.5

2024-04-25

Particuology

Abstract:Accurate assessment and prediction of airflow dynamics and particle deposition in the human respiratory tract are essential for human health, involving inhaled drugs for treating various diseases and toxic particles that can cause illnesses. This intricate process involves complex multiphase flow with distinct respiratory characteristics. Computational fluid dynamics (CFD) acts as a bridge, overcoming the limitations of in vivo and in vitro experiments and providing a means to fully comprehend and reveal the fundamental mechanisms of respiratory flow and particle behavior on a microscopic scale. This paper provides a comprehensive overview and concise summary of recent advancements in the numerical simulation of airflow and particle deposition in the human respiratory tract. Particularly, it summarizes the transition of respiratory tract models from segmented models to emerging physiological characteristic models and whole-lung airway models, and the latest developments on the effects of key factors such as geometric variations, respiratory patterns, and particle physical/chemical properties on respiratory flow and particle deposition. A notable focus of this review is on emerging physiological characteristics models and their associated complex airflow and particle dynamics inside it. The paper concludes with recommendations for future research to further advance the development of this field.

materials science, multidisciplinary,engineering, chemical
Micron particle deposition in a tracheobronchial airway model under different breathing conditions

Kiao Inthavong,Lok-Tin Choi,Jiyuan Tu,Songlin Ding,Francis Thien

DOI: https://doi.org/10.1016/j.medengphy.2010.08.012

2010-12-01

Abstract:Effective management of asthma is dependent on achieving adequate delivery of the drugs into the lung. Inhalers come in the form of dry powder inhalers (DPIs) and metered dose inhalers (pMDIs) with the former requiring a deep fast breath for activation while there are no restrictions on inhalation rates for the latter. This study investigates two aerosol medication delivery methods (i) an idealised case for drug particle delivery under a normal breathing cycle (inhalation-exhalation) and (ii) for an increased effort during the inhalation with a breath hold. A computational model of a human tracheobronchial airway was reconstructed from computerised tomography (CT) scans. The model's geometry and lobar flow distribution were compared with experimental and empirical models to verify the current model. Velocity contours and secondary flow vectors showed vortex formation downstream of the bifurcations which enhanced particle deposition. The velocity contour profiles served as a predictive tool for the final deposition patterns. Different spherical aerosol particle sizes (3-10μm, 1.55g/cm(3)) were introduced into the airway for comparison over a range of Stokes number. It was found that a deep inhalation with a breath hold of 2s did not necessarily increase later deposition up to the sixth branch generation, but rather there was an increase in the deposition in the first few airway generations was found. In addition the breath hold allows deposition by sedimentation which assists in locally targeted deposition. Visualisation of particle deposition showed local "hot-spots" where particle deposition was concentrated in the lung airway.

engineering, biomedical
Review of Experimental Measurements on Particle Size Distribution and Airflow Behaviors During Human Respiration

Nan Hu,Feng Yuan,Annika Gram,Runming Yao,Sasan Sadrizadeh

DOI: https://doi.org/10.1016/j.buildenv.2023.110994

IF: 7.093

2024-01-01

Building and Environment

Abstract:In recent years, pandemic outbreaks have raised concerns about the spread of respiratory infections and their impact on public health. Since the pathogen emission during human respiration is recognized as the primary source, characterizing the physical properties of exhaled particles and airflow has become a crucial focus of attention. This article critically reviews experimental studies in exhaled particles and airflow, examines the uncertainty introduced by different measurement methods, analyzes how it is reflected in measurement outcomes, and provides an in-depth understanding of particle size distribution and airflow behaviors of human respiration. The measurement techniques assessment highlights the variability among particle sizing techniques in detection size range, collection efficiency, hydration status of captured particles, and experimental protocols. A combination of sampling-based instruments and laser imaging systems is recommended for particle sizing to cover a wider detection range, with refined setups in thermal conditions, sampling distance, volume, and duration. Meanwhile, it identifies the complementary nature of qualitative and quantitative measurements of airflow characterization techniques. Image recording systems plus data reconstruction programs are suggested to capture dynamic airflow features while accuracy validation by other techniques is required at the same time. Subsequent analysis of the measurement data showed that the various experimental measurements provided substantial information, but they also revealed disagreements and challenges in quantification. The dominance of submicron aerosols in exhaled particles and jet-like transport in exhaled airflow is obvious. More efforts should be made to measure particles larger than 20 mu m, capture airflow dynamics in a high temporal and spatial resolution, and quantify the impact of face coverings to improve the understanding of human respiratory emissions.
Investigation of Ultrafine Particle Deposition in Human Airway to the 9th Generation of Bronchial Tubes Using Computational Fluid and Particle Dynamics

Nguyen Dang Khoa,Nguyen Lu Phuong,Kazuhide Ito,R. Ooka

DOI: https://doi.org/10.1051/e3sconf/202339601017

2023-06-17

E3S Web of Conferences

Abstract:The behavior of airborne particles in the human respiratory system is closely related to local tissue dosimetry and its associated health risks. The inhalation of these particles is known to be the origin of lung diseases, such as lung cancer, chronic obstructive pulmonary disease, and cardiovascular disease. To compensate for the difficulty of experiments involving volunteers, in silico studies using numerical models have been adopted as promising alternatives. Therefore, this study applied the computational fluid and particle dynamics technique to investigate the deposition of ultrafine particles in the human respiratory tract from the nostrils to the ninth generation of bronchi. A computational model was created using computed tomography images. The airflow patterns were simulated under steady and incompressible conditions at breathing flow rates of 7.5 and 15 L/min, respectively. The discrete phase was simulated for ultrafine particles with aerodynamic diameters of 2–100 nm. Consequently, the validation work confirmed the simulation accuracy for particle sizes > 25 nm. In the lower respiratory system, the total deposition fraction decreased as the particle size increased. In addition, the eighth generation is a focal point of the deposited particles, elucidated by the local deposition fraction. The results of this study will benefit further studies involving health risk assessments and drug delivery.
Research on the deposition efficiency of nanoparticles in human airways

ZHANG Kai,YU Ming-zhou,LIN Jian-zhong

DOI: https://doi.org/10.3969/j.issn.1004-1540.2010.02.001

2010-01-01

Abstract:The Eulerian and Lagrangian methods were used to numerical simulate the transport and deposition of nanoparticles in human airways.The finite volume method and the k-w turbulence model were used to get the flow field,and then the one-way coupling Lagrangian method was used to track the trajectory of nanoparticles with stokes and the Brownian and thermophoretic forces considered.It was found that deposition in the tracheobronchial(TB) airway was high,up to 50% for very small nanoparticles(1 nm).The range in the deposition dropped was from 20% to 14% when particle diameter was between 5~10 nm.However,from 10 nm to 50 nm there was only a small change in the deposition efficiency of 13%.These results are helpful in developping the medicine and equipment for the treatment of diseases of human airways.
Airborne Particles and Health

lidia morawska

2010-01-01

Abstract:Much has been written about airborne particulate matter, and countless meetings, workshops and conferences have been held, both nationally and internationally, to address the many scientific challenges which they present, especially when one considers their effects on human health. Particles are a complex airborne pollutant, because of their many different characteristics and the many different ways in which they can be measured and detected. This article summarises the current state of knowledge on the effects of particulate matter and health, based primarily on epidemiological studies which focused on exposure to particle mass, and more recently, on particle number concentration.
Prediction of Transport and Deposition of Porous Particles in the Respiratory System Using Eulerian–Lagrangian Approach

Sajad Eshaghi,Hassan Khaleghi,Reza Maddahian

DOI: https://doi.org/10.1002/cnm.3873

IF: 2.1

2024-10-25

International Journal for Numerical Methods in Biomedical Engineering

Abstract:ABSTRACT Deep lung delivery is crucial for respiratory disease treatment. Although nano and submicron particles exhibited a good deposition efficiency in deep regions of the lung, powder nonuniformity and particle agglomeration reduce their efficiency. Inhalation of porous particles (PPs) can overcome the mentioned challenges due to their larger size and low‐density. The present study numerically investigates the deposition and penetration efficiency of orally inhaled PPs. A revised drag coefficient was implemented for PP transport. A realistic mouth–throat to the fifth generation of the lung was reconstructed from CT‐scan images. A dilute suspension of uniformly distributed particles was considered at three inhalation flow rates (15, 30, and 45 L/min). Governing equations of the flow field and particle transport are solved using an Eulerian–Lagrangian approach. The results demonstrate that inhaling PPs significantly reduces the total and regional deposition of particles. There was also a critical porosity value under moderate and high inhalation flow rates for large PPs. Below this critical value, PP deposition efficiency substantially decreases. Additionally, it was also found that under low inhalation flow rates, the impact of porosity value is negligible. Almost 95% of the PPs penetrate the lower branches. These findings provide particle engineers and pharmaceutics with profound insight into developing novel inhalation techniques and drug delivery methods for deep lung delivery.

engineering, biomedical,mathematics, interdisciplinary applications,mathematical & computational biology
Insights into the fluid dynamics of bioaerosol formation in a model respiratory tract

Sudipta Saha,Manish Kumar Manna,Aranyak Chakravarty,Sourav Sarkar,Achintya Mukhopadhyay,Swarnendu Sen

DOI: https://doi.org/10.1063/5.0219332

2024-09-17

Biomicrofluidics

Abstract:Bioaerosols produced within the respiratory system play an important role in respiratory disease transmission. These include infectious diseases such as common cold, influenza, tuberculosis, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) among several others. It is, therefore, of immense interest to understand how bioaerosols are produced within the respiratory system. This has not been extensively investigated. The present study computationally investigates how bioaerosols are produced in a model respiratory tract due to hydrodynamic interactions between breathed air and a thin mucus layer, which lines the inner surface of the tract. It is observed that Kelvin-Helmholtz instability is established in the thin mucus layer due to associated fluid dynamics. This induces interfacial surface waves which fragment forming bioaerosols under certain conditions. A regime map is created-based on pertinent dimensionless parameters-to enable identification of such conditions. Analysis indicates that bioaerosols may be produced even under normal breathing conditions, contrary to expectations, depending on mucus rheology and thickness of the mucus layer. This is possible during medical conditions as well as during some treatment protocols. However, such bioaerosols are observed to be larger ( ∼ O ( 100 ) μ m) and are produced in less numbers ( ∼ 100 ), as compared to those produced under coughing conditions. Treatment protocols and therapeutic strategies may be suitably devised based on these findings.
Effects of airway deformation and alveolar pores on particle deposition in the lungs

Yongjun Jin,Haihang Cui,Li Chen,Kai Sun,Zhe Liu

DOI: https://doi.org/10.1016/j.scitotenv.2022.154931

2022-07-01

Abstract:The distal lung (G14–G23), which are composed of alveoli and bronchi, are responsible for almost all gas exchange and micro- and nanoparticle deposition in the lungs. In the existing research using computational fluid dynamics, the geometric modeling accuracy of the bronchial bifurcation structure is given priority, and then the alveoli are attached to bronchi as discrete spherical crowns. This method ignores the correlation between alveoli. In fact, the alveoli have a tessellated distribution, and adjacent alveoli are connected by several alveolar pores. Due to the huge number of alveoli, this seemingly small difference will be greatly amplified, which may lead to a large deviation in the prediction of the overall flow. Accordingly, the objective of this study is to construct a two-dimensional distal lung model including the bronchi, acini, and alveolar pores by using the methods of regular hexagonal tessellational subdivision, fusion, and coordinate transformation. A moving boundary is introduced to simulate the process of airflow and particle deposition in the distal lung, and the effects of bronchial deformation, respiratory frequency, and alveolar pores are obtained. The results show that there are significant differences in intrapulmonary flow patterns with and without alveolar pores. Alveolar pores can establish bypass ventilation downstream of a blockage, thus providing a pathway for particles to enter the airways downstream of the blockage. Changing the respiratory frequency and the amplitude of bronchial deformation will change the relative velocity between particles and moving wall, which, in turn, will change the particle deposition efficiency in the distal lung. To summarize this study, a geometric modeling method for the distal lung with alveolar pores is established, and the important roles of detailed characteristics of the distal lung are revealed. The findings of this study provide a reasonable hydrodynamic mechanism for the prevention of related respiratory diseases.

environmental sciences
Development of multi-generation lower respiratory tract model and insights into the transport and deposition characteristics of inhalable particles

Yan Yang,Zijian Ma,Yijie Zhuang,Xiaoao Long,Yingxin Yu

DOI: https://doi.org/10.1016/j.scitotenv.2023.166725

2023-12-15

Abstract:Airborne particles can spread quickly and enter human respiratory system via inhalation, causing chronic diseases, even cancer. Although recent studies have informed of toxicity of various pollutants, understanding the transport and deposition characteristics of particles in lower respiratory tract is still challenging. The current study proposes a novel model to simulate flow field change from the entrance of lower respiratory tract to pulmonary acinus, while studying particle transport and deposition characteristics. This model for lower respiratory tract with several bronchial extensions containing virtual pulmonary acinus is calculated using computational fluid dynamics and dynamics mesh. The results showed that in the first 10 generations of the lower respiratory tract, vortices and gravity interfered with particles' trajectory, affecting particle deposition distribution. For the first to the tenth-generation respiratory tract, coarse particles were deposited throughout almost the whole respiratory tract model. In contrast, ultrafine particles did not deposit in the higher-generation respiratory tract. The particle enrichment ability of various lobes was uneven with three particle deposition fraction variation patterns. Virtual pulmonary acinus influenced particle deposition and distribution because of vortex ring's trapped ability during expansion and contraction. This new attempt to build a virtual pulmonary acinus model to simulate particle deposition effects in human respiratory system may provide a reference for studying the toxicities of inhalable particles in the exposed human body.
Study on Airflow and Inhaled Particle Deposition Within Realistic Human Upper Respiratory Tract

J Lin,G L Hu,J R Fan,D Pan

DOI: https://doi.org/10.1088/1742-6596/147/1/012067

2009-01-01

Journal of Physics Conference Series

Abstract:Based on the CT (Computerized Tomography) scanned images of a 19-years-old healthy boy, a realistic geometric model of URT from nasal cavity to the upper six-generation bronchial is rebuilt. To investigate airflow and particle deposition in the obtained realistic human upper respiratory tract, RNG k- turbulence model was used to describe the primary flow and particle deposition under three breathing intensity such as 15 L/min, 30 L/min and 60 L/min. The particle is tracked and analyzed in the Lagrangian frame. The velocity fields of airflow under different airflow rates were computed and discussed. The trapping of particles with diameter 1μm on the wall surfaces was monitored, and the locations of trapping in different region were visualized. In order to study the characteristics of particles movement and the effect of particles diameter on the deposition pattern, eleven kinds of sphere particles with different diameters are selected as research object. The diameters of selected particles as follows: 0.1μm, 0.5μm, 1μm, 2.5μm, 3μm, 3.5μm, 4μm, 4.5μm, 5μm, 6.5μm and 8μm. The variation of inhalable particles deposition in realistic human upper respiratory tract with respiratory intensity and particle size was researched and compared.
Multispecies aerosol evolution and deposition in a human respiratory tract cast model

Asgari,Francesco Lucci,Arkadiusz K. Kuczaj,Mahdi Asgari

DOI: https://doi.org/10.1016/j.jaerosci.2020.105720

IF: 4.586

2021-03-01

Journal of Aerosol Science

Abstract:Accurate predictions of aerosol transport, evolution, and deposition in the human airways are crucial for inhalation dosimetry investigations. Inhaled aerosol transported through the airways undergoes thermodynamic changes due to changes in temperature and humidity. Aerosol evolution processes are particularly important for liquid multispecies aerosols. These aerosols are sensitive to condensation and/or evaporation dynamics, which can modify gas/liquid partitioning of each species and particle size distribution. In this manuscript, we present computational fluid dynamics simulations of complex aerosol mixtures in a realistic geometry of the human respiratory tract cast model. We used a publicly available computational framework, AeroSolved, developed for simulation of evolving multispecies aerosol mixtures. We evaluated the dynamics of liquid particles in physiologically relevant conditions of <math>100%</math> relative humidity at the temperature of <math>37°C</math>. We studied two separate inhalation flow scenarios: in the first case, a warm aerosol at <math>50°C</math> was inhaled and subsequently cooled down while flowing in the airways. In the second case, an aerosol at room temperature was inhaled and heated up to the temperature of <math>37°C</math>. Our results demonstrated that aerosol evolution mainly occurs in the upper segments of the airways (throat and trachea) at the very short timescales. Apart from showing the significant influence of temperature and humidity conditions on aerosol dynamics and evolution, we also measured aerosol deposition fluxes investigating the dependence of the delivered aerosol mass on evolution mechanisms. We showed that the delivered regional mass of each species depends on the physico-chemical properties of the mixture, and it is also significantly influenced by the airways' humidity and thermal conditions. It was also shown that the species-specific properties of the liquid mixture (e.g., activity coefficient) play an important role in gas/liquid partitioning of the species. With AeroSolved such dependencies can be further investigated with greater attention towards specific needs and physiologically important conditions (e.g., transient flow inhalation patterns, aerosol mixture composition and its properties).

environmental sciences,meteorology & atmospheric sciences,engineering, chemical, mechanical
Deposition of Non-Spherical Microparticles in the Human Upper Respiratory Tract

Lixing Jia,Lianzhong Zhang,Suyuan Yu

DOI: https://doi.org/10.1016/j.partic.2017.06.009

IF: 3.5

2018-01-01

Particuology

Abstract:We investigated the deposition pattern of microparticles with different particle diameters, shape factors, and initial flow conditions in a realistic human upper respiratory tract model. We identified a close relationship between the deposition fraction and the particle shape factor. The deposition fraction of the particles decreased sharply with increasing particle shape factor because of the decreasing drag force. We also found that the deposition varied at different positions in the upper respiratory tract. At low shape factors, the highest fraction of particles deposited at the mouth and pharynx. However, with increasing shape factor, the deposition fraction in the trachea and lungs increased. Moreover, for a given shape factor, larger particles deposited at the mouth and pharynx, which indicates that the deposition fraction of microparticles in the human upper respiratory tract is affected first and foremost by particle inertia as well as by the drag force. (C) 2017 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.
Respiratory aerosols and droplets in the transmission of infectious diseases

Mira L. Pöhlker,Christopher Pöhlker,Ovid O. Krüger,Jan-David Förster,Thomas Berkemeier,Wolfgang Elbert,Janine Fröhlich-Nowoisky,Ulrich Pöschl,Gholamhossein Bagheri,Eberhard Bodenschatz,J. Alex Huffman,Simone Scheithauer,Eugene Mikhailov

DOI: https://doi.org/10.1103/revmodphys.95.045001

IF: 50.485

2023-10-12

Reviews of Modern Physics

Abstract:Knowing the physicochemical properties of exhaled droplets and aerosol particles is a prerequisite for a detailed mechanistic understanding and effective prevention of the airborne transmission of infectious human diseases. This review provides a critical consideration and synthesis of scientific knowledge on the number concentrations, size distributions, composition, mixing state, and related properties of respiratory particles emitted upon breathing, speaking, singing, coughing, and sneezing. A parametrization of respiratory particle size distributions is derived and presented based on five log-normal modes related to different origins in the respiratory tract, which can be used to trace and localize the sources of infectious particles. This approach may support the medical treatment as well as the risk assessment for aerosol and droplet transmission of infectious diseases. It was applied to analyze which respiratory activities may drive the spread of specific pathogens, such as Mycobacterium tuberculosis, influenza viruses, and severe acute respiratory syndrome coronaviruses 2 (SARS-CoV-2). The results confirm the high relevance of vocalization for the transmission of SARS-CoV-2, as well as the usefulness of physical distancing, face masks, room ventilation, and air filtration as preventative measures against coronavirus disease 2019 and other airborne infectious diseases.

physics, multidisciplinary
On the emergence of criticality for inhalation-driven particle deposition in the anatomical upper airway

Emma Louwagie,Saikat Basu

2024-10-04

Abstract:Inhalation directs air through a defined pathway, initiating from nostrils, moving through the main nasal cavity, past the pharynx and trachea, and culminating in the lungs. Inhaled particles, of a range of sizes, are ferried by this incoming air but are filtered and trapped by upper airway structures to protect the delicate lower respiratory system. From an energetics perspective, the airflow physics along this convoluted tract is characterized by turbulence. The system approaches a critical stationary state over the time scales during which particles enter the airway and deposit. This stasis can be conjectured to correspond with the emergence of criticality in the complex flow domain. For such systemic criticality (i.e., sensitivity to perturbations), inhaled particle deposition impacted by the surrounding flow processes can act as signature avalanche-like events. Based on the principles of organized criticality, we have explored the emergence of power law trends in particle deposition levels at the nasopharynx, a key initial infection site for airborne pathogens. These trends are derived from numerical data from five anatomic airway geometries for 15-85 L/min inhalation rates, modeled using high-fidelity Large Eddy Simulations.

Fluid Dynamics,Quantitative Methods
Transport and Deposition of Particles in Turbulent and Laminar Flow

Abhijit Guha

DOI: https://doi.org/10.1146/annurev.fluid.40.111406.102220

IF: 27.7

2008-01-01

Annual Review of Fluid Mechanics

Abstract:This article reviews the physical processes responsible for the transport and deposition of particles and their theoretical modeling. Both laminar and turbulent processes are considered, emphasizing the physical understanding of the various transport mechanisms. State-of-the-art computational methods for determining particle motion and deposition are discussed, including stochastic Lagrangian particle tracking and a unified Eulerian advection-diffusion approach. The theory presented includes Brownian and turbulent diffusion, turbophoresis, thermophoresis, inertial impaction, gravitational settling, electrical forces, and the effects of surface roughness and particle interception. The article describes two example applications: the deposition of particles in the human respiratory tract and deposition in gas and steam turbines.

mechanics,physics, fluids & plasmas

The Physics of Particle Formation and Deposition During Breathing.

The Physics of Respiratory Particle Generation, Fate in the Air, and Inhalation

Deposition of Droplets from the Trachea or Bronchus in the Respiratory Tract During Exhalation: A Steady-State Numerical Investigation

Aerosol deposition and airflow dynamics in healthy and asthmatic human airways during inhalation

The Mechanism of Breath Aerosol Formation

A review on numerical studies of airflow dynamics and particle deposition in human respiratory system

Micron particle deposition in a tracheobronchial airway model under different breathing conditions

Review of Experimental Measurements on Particle Size Distribution and Airflow Behaviors During Human Respiration

Investigation of Ultrafine Particle Deposition in Human Airway to the 9th Generation of Bronchial Tubes Using Computational Fluid and Particle Dynamics

Research on the deposition efficiency of nanoparticles in human airways

Airborne Particles and Health

Prediction of Transport and Deposition of Porous Particles in the Respiratory System Using Eulerian–Lagrangian Approach

Insights into the fluid dynamics of bioaerosol formation in a model respiratory tract

Effects of airway deformation and alveolar pores on particle deposition in the lungs

Development of multi-generation lower respiratory tract model and insights into the transport and deposition characteristics of inhalable particles

Study on Airflow and Inhaled Particle Deposition Within Realistic Human Upper Respiratory Tract

Multispecies aerosol evolution and deposition in a human respiratory tract cast model

Deposition of Non-Spherical Microparticles in the Human Upper Respiratory Tract

Respiratory aerosols and droplets in the transmission of infectious diseases

On the emergence of criticality for inhalation-driven particle deposition in the anatomical upper airway

Transport and Deposition of Particles in Turbulent and Laminar Flow