Abstract:Dynamic vibration absorbers (DVAs) are extensively used in the prevention of building and bridge vibrations, as well as in vehicle suspension and other fields, due to their excellent damping performance. The reliable optimization of DVA parameters is key to improve their performance. In this paper, an H∞ optimization problem of a novel three-element-type DVA model including an inerter device and a grounded negative stiffness spring is studied by combining a traditional theory and an intelligent algorithm. Firstly, to ensure the system's stability, the specific analytical expressions of the optimal tuning frequency ratio, stiffness ratio, and approximate damping ratio with regard to the mass ratio and inerter-mass ratio are determined through fixed-point theory, which provides an iterative range for algorithm optimization. Secondly, the particle swarm optimization (PSO) algorithm is used to further optimize the four parameters of DVA simultaneously. The effects of the traditional fixed-point theory and the intelligent PSO algorithm are comprehensively compared and analyzed. The results verify that the effect of the coupling of the traditional theory and the intelligent algorithm is better than that of fixed-point theory alone and can make the two resonance peaks on the amplitude-frequency response curves almost equal, which is difficult to achieve using fixed-point theory alone. Finally, we compare the proposed model with other DVA models under harmonic and random excitation. By comparing the amplitude-frequency curves, stroke lengths, mean square responses, time history diagrams, variances and decrease ratios, it is clear that the established DVA has a good vibration absorption effect. The research results provide theoretical and algorithm support for designing more effective DVA models of the same type in engineering applications.

Establishment of the Equal-Peak Principle for a Multiple-Dof Nonlinear System with Multiple Time-Delayed Vibration Absorbers

Multimodal Vibration Suppression of Nonlinear Euler–Bernoulli Beam by Multiple Time-Delayed Vibration Absorbers

The Generalization of Equal-Peak Method for Delay-Coupled Nonlinear System

Exact Solutions for a Novel H<sub>2</sub> Optimal Design of Electromagnetic Tuned Mass Damper

Design and Experiment of Nonlinear Absorber for Equal-Peak and De-Nonlinearity

Study on tuning methodologies of passive vibration absorbers

Nonlinear Generalization of Den Hartog's Equal-Peak Method

Design of dynamic absorbers to control the flexural resonant vibration of structures characterized by multiple natural modes

Optimal control for vibration peak reduction via minimizing large responses

Research on Vibration Suppression of Nonlinear Tuned Mass Damper System Based on Complex Variable Average Method

MECHANISM ANALYSIS OF DELAYED NONLINEAR VIBRATION ABSORBER

Dual quasi-zero-stiffness dynamic vibration absorbers for double-low-frequency vibration suppression

H2 norm based parameter optimization of multiple tuned mass dampers for resonance suppression

Analysis of vibration suppression of master structure in nonlinear systems using nonlinear delayed absorber

H∞ Optimization of a Novel Maxwell Dynamic Vibration Absorber with Lever, Inerter, and Grounded Stiffness

Graphical Design Methodology of Multi-Degrees-of-Freedom Tuned Mass Damper for Suppressing Multiple Modes

H∞ Optimization of Three-Element-Type Dynamic Vibration Absorber with Inerter and Negative Stiffness Based on the Particle Swarm Algorithm

Optimizations of distributed dynamic vibration absorbers for suppressing vibrations in plates

Exact H ∞ optimization of dynamic vibration absorbers: Univariate-polynomial-based algorithm and operability analysis

Tunable Broadband Low-Frequency Band Gap of Multiple-Layer Metastructure Induced by Time-Delayed Vibration Absorbers

Vibration Suppression In A Two-Degree Of Freedom Vibration System Using Delayed Feedback Control