Abstract:Structural evolution of two propylene 1-butene random copolymer (iPPBu) films with different initial crystalline morphology during uniaxial deformation were investigated by synchrotron wide-angle and small-angle X-ray scattering (WAXS/SAXS), Fourier-transform infrared (FTIR) spectroscopy. The iPPBu with α crystal crystallized via mesophase exhibits a nodular morphology, while melt-crystallized iPPBu exhibits a characteristic spherulitic structure. The initial crystalline morphology has been found to exert influence on the structural evolution of the samples, including cavitation, orientation behavior of molecular chains in crystalline and amorphous phases, the occurrence of mesophase, and reduction in crystallinity, etc. Compared with the iPPBu with spherulitic morphology, no obvious cavitation was observed around the yield point in iPPBu with nodular morphology. Moreover, the variation rate of crystallinity with respect to draw ratio is smaller in the iPPBu with nodular morphology. A plausible reason for the phenomenon is that the iPPBu with nodular morphology has the lower lateral extension of crystallites. The onset draw ratio (λ onset) of α-crystal-to-mesophase transition in sample with nodular morphology is larger than that in the sample with spherulitic morphology. The molecular chains tend to be aligned perpendicular to the stretching direction in iPPBu with spherulitic morphology around yield point. This is attributed to the bending and separation of the lamellae with the normal parallel to the tensile direction. However, this phenomenon is not observed in the iPPBu with nodular morphology. In the strain-hardening regime, the strain hardening modulus G p of iPPBu with nodular morphology is higher than that of iPPBu with spherulitic morphology, which results from the more cross-linking points and more tie chains in highly oriented the amorphous phase of the former. A deformation mechanism is proposed to understand the role played by the initial morphology of iPPBu based on the crystal transition, variation in crystallinity, cavitation, and orientation.

Comparative Study on the Molecular Chain Orientation and Strain-Induced Crystallization Behaviors of HNBR with Different Acrylonitrile Content under Uniaxial Stretching

Roles of Conformational Flexibility in the Crystallization of Stereoirregular Polymers

Molecular chain orientation and mechanical properties of hydrogenated nitrile-butadiene rubbers with different acrylonitrile content and crosslink density

Strain‐induced Crystallization of Natural Rubber with High Strain Rates

Strain-Induced Crystallization Behavior of Natural Rubber and Trans-1,4-Polyisoprene Cross Linked Blends

Promoted Strain-Induced Crystallization of Cis-1, 4-Polyisoprene with Functional Carbon Nanodots

Frustrating Strain-Induced Crystallization of Natural Rubber with Biaxial Stretch.

Comparative Study of Vulcanization System on Strain-Induced Crystallization of Epoxidized Natural Rubber

A Molecular Dynamics Simulation Study on Enhancement of Mechanical and Tribological Properties of Nitrile—Butadiene Rubber with Varied Contents of Acrylonitrile

Strain-induced crystallization behavior of polychloroprene rubber

Comprehensive Study on Temperature-Induced Crystallisation and Strain-Induced Crystallisation Behaviours of Natural Rubber/isoprene Rubber Blends

Strain-induced crystal growth and molecular orientation of poly(isobutylene-isoprene) rubber at low temperatures.

Large-scale orientation in a vulcanized stretched natural rubber network: proved by in situ synchrotron X-ray diffraction characterization.

Features of strain-induced crystallization of natural rubber revealed by experiments and simulations

Microstructure of Polyisoprene and Its Effect on Crystallization Behavior

Reconstructing the Mechanical Response of Polybutadiene Rubber Based on Micro-Structural Evolution in Strain-Temperature Space: Entropic Elasticity and Strain-Induced Crystallization As the Bridges.

Strain-induced 3D-Oriented Crystallites in Natural Rubber/Chitin Nanofiber Composites

Research on Mechanical Properties, Compatibility, Flame Retardancy, Hot-Air Ageing Resistance of Hydrogenated Nitrile-Butadiene Rubber/Chloroprene Rubber Blends

Probing the Structural Evolution in Deformed Isoprene Rubber by in Situ Synchrotron X-ray Diffraction and Atomic Force Microscopy

Tensile deformation mechanism of propylene-1-butene random copolymer: The role of initial crystalline morphology

Control of thermal cross-linking reactions and the degree of crystallinity of syndiotactic 1,2-polybutadiene