Abstract:High-performance semi-permeable membranes play a vital role in the membrane-based separation technology for seawater and brackish water desalination. Herein, plasticizer-assisted interfacial polymerization (PAIP) was implemented to fabricate aromatic polyamide layers with improved water flux and comparable salt rejection for the first time. Specifically, plasticizer (i.e., diethyl phthalate, DEP) was introduced into the organic phase to perform interfacial polymerization. Effective regulation of the desalination performance was achieved via meticulously adjusting plasticizer concentration. With the addition of 0.5 wt% DEP, water flux promoted from 1.06 L m−2 h−1 bar−1 of the pristine membrane to 2.85 L m−2 h−1 bar−1, with NaCl rejection decreasing from 98.3% to 98.2%. With the addition of 1.5 wt% and 2.0 wt% DEP, water flux improved to 4.82 L m−2 h−1 bar−1 and 5.95 L m−2 h−1 bar−1, respectively, more than 4.5 and 5.5 times that of the pristine membrane. Nevertheless, NaCl rejection decreased to 96.6% and 95.9%, respectively. The infrared detection revealed that the introduction of DEP disrupted the original intermolecular hydrogen bonding between polyamide chains, thereby enhancing the softness of the polyamide layer, which was demonstrated by the decreased Young's modulus. As a result, the water diffusion efficiency through the polyamide layer was promoted, leading to the significant enhancement of water flux. These findings pave a new route for the synthesis of the aromatic polyamide layer with excellent desalination performance to expand the application of membrane technology.

Thermal-facilitated Interfacial Polymerization Toward High-Performance Polyester Desalination Membrane

Ionic Hyperbranched Poly(amido-amine)-Incorporated Nanofiltration Membranes for High-Efficiency Dye Desalination

Facile Polypyrrole Thin Film Coating on Polypropylene Membrane for Efficient Solar-Driven Interfacial Water Evaporation

Reactable Substrate Participating Interfacial Polymerization for Thin Film Composite Membranes with Enhanced Salt Rejection Performance

4-Dimethylaminopyridine promoted interfacial polymerization between hyperbranched polyesteramide and trimesoyl chloride for preparing ultralow-pressure reverse osmosis composite membrane.

More resilient polyester membranes for high-performance reverse osmosis desalination

Preparation and Characterization of PVDF/nonwoven Fabric Flat-Sheet Composite Membranes for Desalination Through Direct Contact Membrane Distillation

Bis-tris-based Polyester Nanofiltration Membranes Fabricated Via One-Step Interfacial Polymerization for Desalination

Fabrication of anti-fouling polyester nanofiltration membrane for dye desalination

Plasticizer-assisted interfacial polymerization for fabricating advanced reverse osmosis membranes

Preparation of high performance polyamide membrane by surface modification method for desalination

Attenuated thermal-regulated interfacial polymerization towards polyamide nanofiltration membrane with unprecedentedly enhanced performance

Thermally Rearranged Polymer Membranes for Desalination

Diazotized polyamide membranes on commercial polyethylene textile with simultaneously improved water permeance, salt rejections and anti-fouling

Preparation, Characterization And Acid/Alkali Stabilities Of Aromatic Polyesteramide-Based Composite Membranes For Water Desalination

Advanced Sulfonated Polyester Nanofiltration Membranes for Superior Dye Separation, Desalination, and Chlorine Resistance

Tuning the Permselectivity of Polymeric Desalination Membranes Via Control of Polymer Crystallite Size

Tailoring the molecular structure of crosslinked polymers for pervaporation desalination

Polyamide nanofilms synthesized by a sequential process of blade coating-spraying-interfacial polymerization toward reverse osmosis

Fabrication and Optimization of Parameters of High-Performance Polyamide Thin Film Composite Membranes for Desalination

Vapor‐phase Polymerization of High‐performance Thin‐film Composite Membranes for Nanofiltration