An FSS Structure with Geometrically Separable Meander-Line Inductors and Parallel-Plate Capacitors
Peng-Chao Zhao,Zhi-Yuan Zong,Wen Wu,Bo Li,Da-Gang Fang
DOI: https://doi.org/10.1109/tap.2017.2729158
IF: 5.7
2017-01-01
IEEE Transactions on Antennas and Propagation
Abstract:A frequency selective surface (FSS) structure with geometrically separable meander-line inductors (MLIs) and parallel-plate capacitors (PPCs) is proposed. For this FSS structure, the filtering responses for different polarizations and resonance frequencies are realized through separate subcells. For example, to achieve a single-band bandpass performance, two subcells, acting as parallel LC resonators for transverseelectric and transverse-magnetic polarizations, respectively, are implemented by MLIs and PPCs. Because the MLIs and PPCs provide increased equivalent inductance and capacitance, respectively, this FSS provides a miniaturized unit cell size of lambda(0)/20(lambda(0) refers to the resonance wavelength), and its -3 dB bandwidth can be designed by independently adjusting the equivalent inductance and capacitance. A design example shows the easy control of -3 dB bandwidth ranging from 13.6% to 49% with respect to the center frequency. Furthermore, because of the separable subcells, the FSS performances for different polarizations are independently controllable, and it can be readily extended to achieve dual-band bandpass performance with a band ratio ranging from 1.35 to 3.8. In addition, to model the FSS frequency performance precisely, equivalent circuits and closed forms are developed, which serve as a substitute for commercial software for efficient FSS design. Finally, some prototypes are fabricated and measured. All the measured results show that the proposed FSS designs exhibit stable performance under different polarizations and incidence angles (up to 60 degrees), and they exhibit good consistency with those from the full-wave simulations.