Abstract:Abstract Warning signs of possible kick during drilling operation can either be primary (flow rate increase and pit gain) or secondary (drilling break, pump pressure decrease,). Drillers rely on pressure data at the surface to determine in-situ downhole conditions while drilling. The surface pressure reading is always available and accessible. However, understanding or interpretation of this data is often ambiguous. This study analyses significant kick symptoms in the wellbore annulus while under shut-in conditions. We have tied several observed annular flow patterns to the measured pressure gradient during water- air, and water-carbon dioxide complex flow. This is based on experiments in a 140-ft high flow loop, with a hydraulic diameter of approximately 3 in. The experiments were carried out under static conditions to simulate kick occurrence when the drilling fluid is not flowing, typically the wellbore is shut-in. We used an Artificial Neural Network (ANN) and K-Means clustering approach for kick prognosis. We trained these Machine learning models to detect kick symptoms from pressure response and gas evolution data collected between the kick occurrence and the Wellhead. The Artificial Neural Network (ANN) approach was relatively fast with a negligible difference in accuracy when compared for air influx and carbon dioxide influx for kick prognosis. The ANN resulted in an accuracy of about 90% and 93% for air-based kick prognosis. While the accuracy was 92% and 94% for carbon dioxide-based influx. With K-mean clustering, the Silhouette score were 0.5 and 0.6 for the air and carbon dioxide influx respectively. The estimation of the influx size and type is strongly a function of the duration of kick and bottom hole underbalanced pressure. Based on visual analysis, pit gain, and pressure signals, the quantity of the mass influx significantly controls the flow pattern, pressure losses, and pressure gradient as the kick migrates to the surface. The resulting turbulent flow after the initial kick (After Taylor bubble flow) varied with duration of kick, average liquid flow rate, influx type, and drilling scenario. We have tied the surface pressure readings to the flow regimes to better visualize well control approach while drilling. This is based on relating the significant kick symptoms we observed to the pressure readings at multiple locations and time, then training the Deep learning models based on this data. Although computationally demanding, the Deep-Learning model can use the surface pressure data to relay annular flow patterns while drilling. This work provides an alternative and relatively accessible primary kick detection tool for drillers based on measured pressure responses at the surface.

Modelling of Formation Pore Pressure Inversion During Tight Reservoir Drilling

Evolution of gas kick and overflow in wellbore and formation pressure inversion method under the condition of failure in well shut-in during a blowout

Wellhead Backpressure Control Strategies and Outflow Response Characteristics for Gas Kick During Managed Pressure Drilling

Automated Gas Influx Handling Model and Mechanisms During Deep High-Temperature and High-Pressure Well Drilling

Numerical Model for Evaluating Well Kick and Lost Circulation During Managed Pressure Drilling

Gas Kick Simulation for Offshore Gas-Hydrate Reservoir Drilling

Effects of Phase Transition on Gas Kick Migration in Deepwater Horizontal Drilling

Kicks and their significance in pore pressure prediction

Intelligent Inversion Analysis of Drilling Gas Kick Characteristic Parameters and Advanced Predictions of Development Trends

Wellbore multiphase flow behaviors of gas kick in deep water horizontal drilling

Downhole gas-kick transient simulation and detection with downhole dual-measurement points in water-based drilling fluid

Wellbore Dynamics of Kick Evolution Considering Hydrate Phase Transition on Gas Bubbles Surface During Deepwater Drilling

Transient Fully Coupled Hydrodynamic-Hydrate Model for Deepwater Kick Simulation

Modelling of Transient CO2/Water Flow in Wellbore Considering Multiple Mass and Heat Transfer

Probabilistic Prediction Method of Formation Pore Pressure

Seepage–Diffusion Mechanism of Gas Kick Considering the Filtration Loss of Oil-Based Muds During Deepwater Drilling

Study of Homogeneous Reservoir Pressure Inversion Model Based on Permeability Mechanics and Interpretation Software Design

Modeling of wellbore multiphase flow with free gas influx during horizontal drilling in marine hydrate reservoirs

Propagation characteristics and application effects of measurement-while-drilling pressure wave for early gas-kick detection

Influence of Permeable Wellbore on Formation Testing While Drilling and Mobility Inversion

A Machine Learning Analysis to Relate Flow Pattern and Pressure Gradient During Gas Kicks Under Static Conditions