3-D-Printed Dual-Band Circularly Polarized Filtering Antenna With Self-Diplexing Property for Millimeter-Wave Applications
Hao Xu,Haiwen Liu,Taotao Huang,Tzu-Yu Liu
DOI: https://doi.org/10.1109/tap.2024.3370300
IF: 5.7
2024-04-09
IEEE Transactions on Antennas and Propagation
Abstract:A 3-D-printed self-diplexing circularly polarized (CP) antenna with filtering responses is proposed for Ka-band wireless communications. The antenna consists of a dual-channel filtering feeding circuit, a parallelogram-shaped (PS) radiator, and a dual-band tapered polarizer. In the feeding circuit, a shared dual-mode resonator is adopted to couple with two single-mode resonators in each channel, from which diplexing channels and filtering responses can be achieved. Moreover, a tapered cylindrical waveguide with a pair of nonuniform grooves is employed as a polarizer, overcoming the challenge of simultaneous CP in two nonadjacent bands with enhanced gain and improved polarization purity. To improve the accuracy of 3-D printing fabrication, a PS radiator, which also acts as a mode converter, is utilized between the polarizer and the feeding circuit. For demonstration, a prototype has been designed and measured. With the all-metal 3-D printing technique, the multifunction antenna is fabricated monolithically with a high-integrated geometry. It features overlapped bandwidths of 3% and 2.1%, and isolations of over 60 and 27 dB in the distinct channel bands, respectively. Deep fusion, high isolation, and low loss make it a promising candidate for millimeter-waveband applications.
telecommunications,engineering, electrical & electronic