Abstract:Much efforts have been devoted to developing electrocatalysts applicable to anion exchange membrane water electrolyzer (AEMWE). AEMWE operates in basic condition, which allows non-noble metal-based catalysts to be used, while its membrane electrode assembly (MEA) design allows higher current density compared to conventional alkaline water electrolyzer (AWE). Among many candidates for oxygen evolution reaction (OER), NiFe layered double hydroxide (LDH)-based electrocatalysts show the highest activity in an alkaline medium. Unfortunately, the poor electrical conductivity of NiFe-LDH limits its potential as an electrocatalyst, which was often solved by hybridization with conductive carbonaceous materials. However, we find that using carbonaceous materials for anode has detrimental effects on the stability of AEMWE at industrially relevant current densities. In this work, a facile monolayer structuring is suggested to overcome low electrical conductivity and improve mass transport without using carbonaceous materials. Bulk NiFe-LDH (B-NiFe-LDH) with multiple cationic layers was synthesized by following a conventional co-precipitation method, while monolayer NiFe-LDH (M-NiFe-LDH) was prepared using a similar method, but with formamide present in solvent. While Fe 2p and O 1s did not show noticeable difference, M-NiFe-LDH had larger Ni 3+ peak than B-NiFe-LDH, indicating that M-NiFe-LDH has more Ni species in NiOOH environment rather than Ni(OH) 2 environment. Here, more NiOOH phase in M-NiFe-LDH caused higher conductivity, leading to higher specific activity. The effect of electrical conductivity was further investigated by mixing the catalysts with various amounts of carbon materials. When carbon black (Vulcan XC-72) was loaded together with B-NiFe-LDH, the OER activity increased from the absence of carbon up to carbon-to-catalyst weight ratio of 0.1. Further addition of carbon did not increase the current density. On the other hand, the OER activity barely changed upon carbon addition for M-NiFe-LDH. As only Ni 3+/4+ species are known to have OER activity, facile electron transfer from Ni 2+ sites to Ni 3+/4+ is important. Mixing carbon materials with B-NiFe-LDH provided conductive networks into previously "electron-unreachable" regions, which was also confirmed by the increase in the size of Ni oxidation peaks upon carbon addition. On the other hand, the contact between glassy carbon and M-NiFe-LDH catalyst was sufficient to have efficient electron transfer without carbon. The M-NiFe-LDH deposited on Ni foam (NF) showed much better AEMWE performance than B-NiFe-LDH, due to better electrical conductivity and higher hydrophilicity. When the M-NiFe-LDH was loaded on carbon paper (CP) instead of Ni foam, water electrolysis performance was enhanced, but stability was greatly lowered. Similar to the M-NiFe-LDH, the CP substrate showed the higher initial performance than the NF substrate for B-NiFe-LDH, but the B-NiFe-LDH/CP stopped operating eventually even at milder conditions. Overall, using M-NiFe-LDH/NF electrode, the high energy conversion efficiency of 72.6% and an outstanding stability at a current density of 1 A cm -2 over 50 h could be achieved without carbonaceous material. This work highlights electrical conductivity and hydrophilicity of catalysts in membrane-electrode-assembly (MEA) as key factors for high performance AEMWE.

Electro Catalytic Performance of Bimetallic LDH on Mxene Adsorbed Nickle Foam

MXene Introduced Between CoNi LDH and NiMoO4 Nanorods Arrays: A Bifunctional Multistage Composite for OER Catalyst and Supercapacitors

MXene introduced between CoNi LDH and NiMoO 4 nanorods arrays: A bifunctional multistage composite for OER catalyst and supercapacitors

MXene supported nickel-cobalt layered double hydroxide as efficient bifunctional electrocatalyst for hydrogen and oxygen evolution reactions

MXene-supported NiMn-LDHs As Efficient Electrocatalysts Towards Enhanced Oxygen Evolution Reactions

Vertically-interlaced NiFeP/MXene electrocatalyst with tunable electronic structure for high-efficiency oxygen evolution reaction

Preparation of nickel-manganese based bimetallic hydroxide nanosheets for enhanced electrocatalytic oxygen evolution reaction

Transition Metal Ions Synergistic Bilayer H2O Pillared MXene Directing In Situ Ordered Embedding Growth of Highly Efficient NiFe Alloy Catalysts

Effects of surface functionalization of mxene-based nanocatalysts on hydrogen evolution reaction performance

Ni Nanoparticles Decorated Nife Layered Double Hydroxide As Bifunctional Electrochemical Catalyst

Fabrication of nickel nanoparticles anchored on a 2D double transition metal MXene for efficient hydrogen and oxygen evolution reactions

High Efficiency of Self-Assembly Between Exfoliated MXene and Layered-Double-hydroxide Nanosheets in Exploring High-Performance Oxygen Evolution Reaction Electrocatalysts

Interface Catalysis of Nickel Molybdenum (NiMo) Alloys on Two-Dimensional (2D) MXene for Enhanced Hydrogen Electrochemistry

Late Transition Metal Doped MXenes Showing Superb Bifunctional Electrocatalytic Activities for Water Splitting via Distinctive Mechanistic Pathways

3D interweaving MXene–graphene network–confined Ni–Fe layered double hydroxide nanosheets for enhanced hydrogen evolution

V2C MXene Synergistically Coupling FeNi LDH Nanosheets for Boosting Oxygen Evolution Reaction

High Performance Anion Exchange Membrane Water Electrolyzer Using Monolayer Nickel-Iron Layered Double Hydroxide As Anode Catalysts

Dual-Atom Co/Ni Electrocatalyst Anchored at the Surface-Modified Ti 3 C 2 T x MXene Enables Efficient Hydrogen and Oxygen Evolution Reactions

Electrostatic adsorbing graphene quantum dot into nickel–based layered double hydroxides: Electron absorption/donor effects enhanced oxygen electrocatalytic activity

In situ semi-etching of bimetallic LDH nanosheet arrays into FeNi-LDH/MOF to boost oxygen evolution reaction

Design of Self-Supported Flexible Nanostars MFe-LDH@ Carbon Xerogel-Modified Electrode for Methanol Oxidation