Abstract:Here, through the effective passivation of thick film defects in perovskite by employing the RbX addition strategy, the crystalline quality, enhances the device performance of bifacial perovskite solar cells (PSCs), positioning them at the forefront of current research in this field. The front photovoltaic conversion efficiency reaches 21.04%, with a bifaciality of ≈80%, achieving an power generation density (PGD) of 24.36 mW cm−2 at a albedo of 0.2. Bifacial perovskite solar cells (PSCs) possess a dual light‐absorbing structure, which enables higher power output at lower additional costs. However, the replacement of metal electrodes with transparent ones leads to serious light loss, necessitating a thicker perovskite layer to compensate for this drawback. In this study, the impact of different rubidium halide (RbCl, RbBr, and RbI) additives is systematically investigated on precursor solubility and the quality of micron‐sized perovskite thick films prepared using a two‐step method. It is observed that RbCl exhibited the strongest interactions with PbI2, enhancing its solubility and leading to the formation of multihole PbI2 films that promote subsequent crystallization of thick perovskite film. Additionally, the RbCl‐based perovskite film demonstrates a narrowed bandgap attributed to the formation of a‐FAPbI3. Consequently, the short‐circuit current density (Jsc) and open‐circuit voltage (Voc) in the RbCl‐based bifacial PSCs are simultaneously enhanced, and a record efficiency of 20.86% (21.04% certified) is also obtained among n‐i‐p bifacial PSCs, exhibiting an ≈80% bifaciality and a power generation density (PGD) exceeding 24 mW cm−2 with a reflectivity value of 0.2. More importantly, the optimized device does not show any performance degradation after continuous illumination under 1sun for 1000 h.

Perovskite new solar cell and preparation method thereof

Perovskite solar cell and preparation method thereof

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells.

Efficient and stable Ruddlesden–Popper perovskite solar cell with tailored interlayer molecular interaction

United boron compound modification-based perovskite type solar cell and preparation method thereof

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Conjugated Molecules “Bridge”: Functional Ligand toward Highly Efficient and Long‐Term Stable Perovskite Solar Cell

Rubidium Halide Additive Engineering for Efficient and Stable Bifacial Perovskite Solar Cells

Preperation of Perovskite Materials and Perovskite Solar Cells by Vapor-Assisted Solution Process

Preparation method of organic-inorganic hybrid perovskite thin film

Electrochemical Preparation of Novel Perovskite Solar Cells

Facile preparation of organometallic perovskite films and high-efficiency solar cells using solid-state chemistry

High‐Quality Subsurface Construction of Perovskite Film for Efficient and Stable Solar Cells

Heterogeneous Nucleation and Enhanced Charge Transfer via Amorphous Metal‐Organic Frameworks for Efficient and Stable Perovskite Solar Cells

Concerted regulation on vertical orientation and film quality of two-dimensional ruddlesden-popper perovskite layer for efficient solar cells

Processing and Preparation Method for High-Quality Opto-Electronic Perovskite Film

Aligned and Graded Type‐II Ruddlesden–Popper Perovskite Films for Efficient Solar Cells

Preheating-assisted deposition of solution-processed perovskite layer for an efficiency-improved inverted planar composite heterojunction solar cell

Ion‐Migration Inhibition by the Cation–π Interaction in Perovskite Materials for Efficient and Stable Perovskite Solar Cells

Perovskite solar cells: film formation and properties

Rational Interface Design and Morphology Control for Blade‐Coating Efficient Flexible Perovskite Solar Cells with a Record Fill Factor of 81%