Abstract:Monodisperse polymer microspheres have been widely used in chromatography separation, coating additives,biological separation and targeted drug delivery due to their varying properties, such as the various morphology, well-defined composition, functional surface and biocompatibility. Recently, the preparation of monodisperse polymer microspheres and nanohydrogels has attracted great interests. Considering the shortage of the preparation method of the polymer nanohydrogels, we developed a new technique—reflux precipitation polymerization—for preparation of monodisperse and biocompatible polymer nanohydrogels. A typical procedure for the reflux precipitation polymerization is described as follows:Firstly, a suitable amount of monomers [MAA(methacrylic acid) and DVB(divinylbenzene)] and initiator [AIBN(2,2-azobisisobutyronitrile)] dissolved in acetonitrile was added into a round-bottom flask configured with a condenser.When the reaction temperature increased to the boiling point of the solution for about 5 min, the initially transparent reaction solution became milky white, and the reaction was continued for another 2 h. Then the resultant microspheres were separated and purified by repeating ultra-centrifugation(12000 r/min for 3 min)-decanting-redispersion(in ethanol with ultrasonic bathing) for three times. The morphology and particle size distribution of PMAA nanohydrogels were characterized by scanning electron microscope(SEM) and dynamic light scattering(DLS). Compared to the traditional precipitation polymerization and distillation-precipitation polymerization, this new method has many merits, such as high efficiency, good repeatability and easy operation, which can be used to high efficient preparation of polymer nanohydrogels and the related composite microspheres. Through testing the reaction conditions, such as reaction time, solid content, cross-linker content and solvent mixture, we successfully prepared the monodisperse PMAA nanohydrogels, and obtained the fundamental rule for the morphology control. We found that the diameter of PMAA nanohydrogels became larger and larger as the reaction time extended or the solid content and/or the ratio of good solvent of polymer increased. The particle size distribution of the PMAA nanohydrogels became poor if the solid content or the cross-linker content was beyond a certain threshold. These nanohydrogels and the related composite microspheres prepared by this new technique will be widely used in the biomedical fields.

Design of teaching experiment for preparation of polymeric nanospheres

Optimising the Shell Thickness-To-Radius Ratio for the Fabrication of Oil-Encapsulated Polymeric Microspheres

Experimental Exploration on Preparation of Porous Polymer Microspheres

Teaching experimental design and development of a novel drug loading system based on temperature-sensitive material and electrospinning technique

Controllable Preparation of Monodisperse Chitosan Microspheres Based on Microfluidic Technology

Improvement on: Preparation of Gelatin Microspheres

Preparation of Hollow Polymer Microspheres with Hydrophilic/Hydrophobic Asymmetric Surface and Loading of Magnetic Nano-Particles

Preparation and characterization of PLGA microspheres by microfluidics method

Designing, Synthesizing, and Analyzing a Comb-like Polymeric Surfactant, Poly(acrylic acid- co -octadecyl acrylate), in a Multidisciplinary Laboratory Experiment

Preparation and Performance Evaluation of Self-Cementing Nanoscale Polymeric Microspheres with Salt and Temperature Tolerance

Preparation of Polymeric Nanomaterials Using Emulsion Polymerization

Controllable Inducing Preparation of Polymorphous Hundred-Micron Alumina Microspheres Via Droplet-Based Two-Stage Microfluidic Solvent Extraction Technology

Application of Rotatable Central Composite Design in the Preparation and Optimization of Poly (Lactic-Co-glycolic Acid) Nanoparticles for Controlled Delivery of HSA

Experimental Design for Preparation and Characterization of Magnetic Polystyrene Microspheres

Preparation of Poly(β-Hydroxybutyrate) and Poly(lactide) Hollow Spheres with Controlled Wall Thickness

Precise Fabrication of Porous Microspheres by Iso-Density Emulsion Combined with Microfluidics

Teaching Softness of Polymer Microgels Employing Atomic Force Microscopy

Formation, Stabilization & Application of Polymeric Nanoparticles

Reflux Precipitation Polymerization: A New Technology for Preparation of Monodisperse Polymer Nanohydrogels

Preparation and Characterization of Fe3O4 Magnetic Nanopaticles Loaded PLGA Microspheres

Preparation of polystyrene/EVA/CaCO3 microspheres using a novel one-pot method via a phase inversion emulsion process