Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Optimal design of control system for artificial marine environment testing device

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Research on the Depth Control Strategy of an Underwater Profiler Driven by a Mixture of Ocean Thermal Energy and Electric Energy

Design and Performance Analysis of a Pressure Chamber for Simulation of Deep Sea Conditions

Multivariable Optimal Control with Adaptation Mechanism in Rudder/fin Stabilizing System

Measurement and control system for gas-tight deep-sea water sampler based on LabVIEW

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Design and Development of Test and Control System for Hydraulic Steering Control Unit Based on Virtual Instrument

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

Development and Optimization of the Simulation Test Device for Corrosion in Marine Environment

Finite-time adaptive anti-disturbance constrained control design for dynamic positioning of marine vessels with simulation and model-scale tests

Prototype and Test

Design of the Intelligent Control System Integration of Wastewater Treatment

Control System of Simulating Platform for Deep-Sea Extreme Environment

Temperature Control System for the Simulation Platform of Culturing Deep-Sea Microbes

Water plant optimization control system based on machine learning

Design of a Fault Diagnosis System for the "jiaolong" Deep-sea Manned Vehicle.

Optimal Design and Experimental Research on Red Tide Monitoring System

Design and Implementation of Small Modular Amphibious Robot System

A robust optimal control by grey wolf optimizer for underwater vehicle-manipulator system

Optimization of tool orientation for improving the cleaning efficiency of offshore jacket-cleaning systems