Abstract:Titanium alloys Ti-6Al-4V are widely used in many industrial and medical applications because of their superior qualities over many other alloys like aluminum and steel. Some of their properties like high strength to weight ratio, ability to maintain strength at elevated temperatures (around 500°C) and ability of corrosion resistance in severe environmental conditions has made them excellent to use in many aerospace and bio-medical industrial applications. But the properties which make them ideal for most practical applications severely hinders their machinability and therefore, the material is renowned as difficult to machine material. The low thermal conductivity of titanium alloys does not allow the generated heat to dissipate away quickly and thus results in chemical reaction with cutting tool materials at higher temperatures and due to which these alloys are still machined with un-coated carbide tools at very low cutting speeds and the advantage of machining at high speed machining regime for these alloys are still not seen. The high cost of super hard cutting tools and also possible chemical reaction with work material still does not allow industrialists to use these materials for machining of titanium alloy. On the other hand recent advances in deposition of coating material on carbide tools has attracted many researchers in finding their advantages and best optimal coating combination for enhancing machinability of titanium alloys with carbide tools. This study therefore is specifically aimed and designed in evaluating the effectiveness of different coating layers on k-grade cemented carbide cutting tool by studying their effect on cutting forces, tool stresses and heat distribution by using finite element numerical simulations at high speed cutting conditions. Finite element numerical simulations are widely employed in academic research field because it provides fast & reliable results and thus eliminates expensive experimentation costs which otherwise is always required. Three different type of coating materials has been used in this study and the results has shown that the k-grade cemented carbide cutting tool with multi-layer coating (Al2O3+TiAlN+TiN) has shown some advantages over uncoated and single layer coating (TiAlN) in terms of heat distribution, cutting forces and tool stresses at same cutting conditions due to higher hot strength and resistance to adhesion. It can be concluded from the study that multi-layer coated k-grade cemented carbide cutting tools can be used at slightly higher speeds than un-coated or single layer coated carbide tools and can give higher tool life as compared to single layer and un- coated carbide tools.

Studies on Coated Cutting Tools and Processes for Internal Thread Milling the Super-Strength Steel

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

Analysis of tool wear and cutting characteristics in milling of powder metallurgy nickel-based superalloy by various coatings

PVD coating strategies: Developing a combination of AlCrN and AlTiSiN for enhanced surface performance during threading of super duplex stainless steel

Machinability study on hard milling of ultra-high strength steel 30CR3SiNiMoVA

Finite element analysis of Ti 1-x Al x N coated tools cutting performance and tool wear during Ti-6Al-4V milling

Experimental investigation on hard milling of high strength steel using PVD-AlTiN coated cemented carbide tool

Evaluating the Effectiveness of Various Coating Layers Applied on K-Grade Cemented Carbide Cutting Tools on Machinability of Titanium Alloy Ti-6Al-4V in High Speed End Milling

Study on Performance of PVD AlTiN Coatings and AlTiN-Based Composite Coatings in Dry End Milling of Hardened Steel SKD11

Experimental Investigation on Tool Wear Characteristics of PVD and CVD Coatings During Face Milling of Ti6242S and Ti-555 Titanium Alloys

Enhancing Tool Performance in High-Speed End Milling of Ti-6Al-4V Alloy: The Role of AlCrN PVD Coatings and Resistance to Chipping Wear

A comparative study of hole-making performance by coated and uncoated WC/Co cutters in helical milling of Ti/CFRP stacks

Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy

Experimental investigation of uncoated, single layer, and multilayer-coated TiAlN/TiN tool inserts in dry orthogonal cutting of AISI/SAE 4140 alloy steel

A new TiAlSiN coated tool and its machining performance evaluation for milling difficult-to-machining materials under MQL conditions

An investigation on wear mechanism of high-speed turning of free-cutting steel AISI 1215 using uncoated and multi-layer coated tools

Dry Milling of the Ultra-High-strength Steel 30crmnsini2a with Coated Carbide Inserts

Machinability Study on 3%co–12%cr Stainless Steel in Milling

Durability of cutting tools with deposited ceramic–metallic coatings (Ti,Al)N – Cu and (Ti,Al)N – Ni when turning and milling steels

Mechanical and cutting performance of cemented carbide tools with Cr/x/DLC composite coatings

Cutting performance and surface quality of Ti-6Al-4V by longitudinal ultrasonic vibration-assisted high-speed dry milling with coated carbide tools