Abstract:Average convective heat transfer on the top and bottom surfaces of a plain plate and four plates with a pair of delta winglet longitudinal vortex generator punched directly from the plates at attack angles of 15°, 30°, 45° and 60° respectively, is experimentally and numerically studied in the present paper. The plate fixed horizontally in the center of the tested channel is designed to simulate the forced heat transfer on the both surfaces of a single piece of fin in a fin-tube heat exchanger. Experimental results show that the average Nusselt number on the surfaces of plate increases with the increase of the attack angle of delta winglet pair compared with that of plain plate without delta winglet pair in the test range. The average Nusselt number of the plate with attack angle of 60° is slightly higher than that of plate with attack angle of 45°, yet may bring larger pressure drop. Strong longitudinal vortices are visualized when air flow across the leading-edges of the winglet pair. And a portion of air stream flows into the lower channel through the punched holes on the plates after rushing at the frontal face of delta winglet, and disturbs the flow field of the lower channel further. The heat transfer in the tested channel of five cases is also numerically investigated. Variance of average Nusselt number between the numerical results and experimental results for the five cases are all less than 10%, validating the present models and methods used for the simulation of fin channel flow with punched vortex generators feasible and reliable. The computed velocity and temperature fields are analyzed to understand the details of fin channel flow with longitudinal vortex generator. The experimental and numerical results reveal that the transverse flow of air stream through the punched holes disturbs the air flow in the lower channel, enhancing the heat transfer on the under surface of fin.

Flow and heat transfer characteristics in a rectangular channel with vortex generators

Numerical Investigation and Analysis of Heat Transfer Enhancement in Channel by Longitudinal Vortex Based on Field Synergy Principle

Numerical Study on Laminar Convection Heat Transfer in a Rectangular Channel with Longitudinal Vortex Generator . Part A : Verification of Field Synergy Principle

HEAT TRANSFER ENHANCEMENT IN A CHANNEL WITH LONGITUDINAL VORTEX GENERATORS AND FIELD SYNERGY PRINCIPLE ANALYSIS

Numerical study of fluid flow and heat transfer in a flat-plate channel with longitudinal vortex generators by applying field synergy principle analysis

Numerical study on laminar convection heat transfer in a channel with longitudinal vortex generator. Part B: Parametric study of major influence factors

Heat Transfer Enhancement in Rectangular Narrow Channel with Longitudinal Vortex Generators

Effect of longitudinal vortex generator on heat transfer in rectangular channels

Numerical Study of Heat Transfer and Fluid Flow in Rectangular Narrow Channel with Periodically Mounted Longitudinal Vortex Generators

The mechanism of heat transfer enhancement using longitudinal vortex generators in a laminar channel flow with uniform wall temperature

Experiment and Simulation of Heat Transfer in a Rectangular Channel with Vortex Generator

Investigation on laminar convection heat transfer in fin-and-tube heat exchanger in aligned arrangement with longitudinal vortex generator from the viewpoint of field synergy principle

Numerical study of liquid flow and heat transfer in rectangular microchannel with longitudinal vortex generators

Numerical Analysis and Parametric Optimization on Flow and Heat Transfer of a Microchannel with Longitudinal Vortex Generators

Study on Two-Phase Heat Transfer Enhancement by Longitudinal Vortex

Numerical Study Of Flow And Heat Transfer In Rectangular Channel With Periodic Longitudinal Vortex Generators Under Pulsating Flow

Numerical investigation of heat transfer using a novel punched vortex generator

Numerical Analysis on Heat Transfer Enhancement by Longitudinal Vortex Based on Field Synergy Principle

Numerical Study of Influence of Longitudinal Vortex Generator on Flow and Heat Transfer in Rectangular Channel

An investigation on the influence of the shape of the vortex generator on fluid flow and turbulent heat transfer of hybrid nanofluid in a channel

Numerical Analysis to Vortex Heat Transfer Enhancement Based on Field Synergy Principle