Discussion on Course Teaching of Power Electronic Technology

Thomas Bodenheimer,Kevin Grumbach

DOI: https://doi.org/10.3969/j.issn.1673-582x.2009.02.027

2009-01-01

Abstract:According to the teaching practise,this article discusses on how to improve the teaching quality of Power Electronic Technology from teaching content,teaching method and teaching means,examination form,combining learning with working and so on.

What problem does this paper attempt to address?

Interactive Experiment Teaching Method of Electrical Testing Technique Course

YANG Jia-qiang,ZHAO Jian-yong,PAN Zai-ping

DOI: https://doi.org/10.3969/j.issn.1008-0686.2013.03.024

2013-01-01

Abstract:In this paper,current situation of Electrical Testing Technique course is analyzed and existing problems are pointed out.Some new ideas of interactive teaching focused on experiment content,process and evaluation are put forward.Specific implementation steps and methods of the interactive teaching are elaborated by the example of current detection experiment.Practice proves that,by this teaching method,the students′ system concept will be further strengthened and the capacity to analyze and solve problems will be improved.
Textbook Construction and Teaching Reform of Electric Power Engineering

JU P,MA Hong-zhong,WEI Zhi-nong,YUAN Yue,ZHANG Li-min

DOI: https://doi.org/10.3969/j.issn.1008-0686.2011.02.034

2011-01-01

Abstract:Electrical Power Engineering is the core course of the major of electrical engineering and automation.after several changes of this major in our country,teaching requirements and social needs change correspondingly.The textbook construction of Electrical Power Engineering must adapt the need of social development.Combined with Electrical Power Engineering edited by our university,this paper analyzes the research status at home and abroad of this kind of textbooks,studies the knowledge of discipline of electrical power engineering.Based on it,this paper highlights the content and characteristics of Electrical Power Engineering,and proposes the teaching requirements of this textbook nowadays.
Enhancement on Experimental Teaching of Power Electronics and Electrical Machi Ne Control

潘再平,唐益民

DOI: https://doi.org/10.3969/j.issn.1006-7167.2002.01.013

2002-01-01

Abstract:This paper described how to strengthen the experimental teaching of Power Electronics and Electrical Machine Control in establishment of laboratory, writing of experimental textbook and teaching of experiments during the reform of traditional Electric Machine Specialty.
Innovating practical teaching and improving teaching effects of power electronics technology basic course

Li Xuchun,Wang Chunfeng

DOI: https://doi.org/10.3969/j.issn.1002-4956.2012.07.004

2012-01-01

Abstract:The discussion is focused on the reform of the course of power electronics technology,with respect to both class teaching and experimental practice.The power electronics technology is a lecture of developing fast and requiring more practical experience,therefore it is a task that how to fulfill the teaching objectives within limited time.The class teaching contents are modified,and a new experimental platform is designed,so that students could fully comprehend the basic knowledge and techniques of power electronics technology,and improve the experimental techniques.Teaching practices show that through the reform,the students' abilities of identifying,analyzing and solving problems are much better cultivated.
Teaching Reforms and Practices on Electronic Circuit Experiment Courses

Xihua LI,Xianfeng YE,Hongjun SHI

DOI: https://doi.org/10.3969/j.issn.1672-4550.2014.02.025

2014-01-01

Abstract:According to the actual demands of the electronic technology and industry development,we have analyzed,updated and reorganized the content of the courses on the Circuit Principle Experiments and the Analog Circuit Experiments. A new experimental course: the Fundamentals of Electronic Circuit Experiments has formed. In the guarantee of the basic experimental skill training,the new curriculum has increased the component of comprehensive innovation design experiments,hence the students' awareness of innovation,design ability and engineering practice ability have been trained and raised. This paper described the teaching content organization and design,teaching practice and effectiveness of the Fundamentals of Electronic Circuit Experiments.
Preliminary Research on Teaching Methods of the Elective Course for Senior Student——From Reform of Teaching Method for the Course Introduction to Systems Engineering

Zhou Lifang,Liang Jun,Wang Hui,Xie Yiling

DOI: https://doi.org/10.3969/j.issn.1000-6168.2012.02.025

2012-01-01

Abstract:The purpose of elective courses is to respect the personality development of students,to expand the student's knowledge and improve their overall quality.However,due to various reasons,the quality of teaching of elective courses is generally not satisfactory.The possible reason is analyzed and ideas to improve the quality of teaching of elective courses are discussed,combined with the reform of teaching method for the course Introduction to Systems Engineering.
Teaching design of "practice for electronic circuit setting and debugging"

LI Xi-hua,YE Xian-feng,SHI Hong-jun

DOI: https://doi.org/10.3969/j.issn.1672-4305.2013.02.050

2013-01-01

Abstract:This paper introduces a new course,"Practice for Electronic Circuit Setting and Debugging",which is syncretized with "Analog Electronics Circuits Laboratory " and "Electronic Circuit Setting and Debugging ".It combines the teaching contents and aims of both courses,therefore this new course is comprehensive.This paper discusses its teaching aims,contents,instructive methods,evaluation for teaching effect and the expecting teaching effect.
Exploration and Reflections on Teaching Embedded System to Electronics Majors in Local Colleges

邹常青,谭家杰,吴思为

DOI: https://doi.org/10.3969/j.issn.1672-0318.2012.01.015

2012-01-01

Abstract:The course, Embedded System is characterized by practicality and applicability. The article analyzed the characteristics of teaching Embedded System, and discussed the current situation of Embedded System teaching and problems. Suggestions on teaching reform and innovation of Embedded System were offered to improve college students＇ practical ability and to develop skilled professionals qualified for R＆D in the field of embedded system.
Study on Designing Experiment Teaching Supporting Electrical Equipment Course

卢慧芬,邱建琪,潘再平

DOI: https://doi.org/10.3969/j.issn.1002-4956.2008.12.042

2008-01-01

Abstract:This paper analyzes the characteristics of integrated experiment designing work,proposes the methodology,and discusses the requirements on the experimental items,implementation,experimental reports and so on.Finally,it explores the approaches to motivate students' innovative ability by means of the integrated designing experiments.
A New Model of Electrical Basic Courses Teaching Oriented to Ability Enhancement

Ying-ying YAO,Cheng-zhi FAN,Ping LIN,Hao MA,Wei WEI

DOI: https://doi.org/10.3969/j.issn.1008-0686.2015.03.001

2015-01-01

Abstract:In view of problems in the electrical information curriculum,this paper discusses the necessity of con-struction of series of courses association. Present ability oriented electrical basic courses teaching:a new mode for the integration and optimization of curriculum structure and the curriculum content,reforming teaching methods,in order to systematic principle,method,principle and practice principle of basic electrical technology curriculum sys-tem is conducive to the implementation of creative learning and play,meet the needs of training innovative talents.
States on education of power electronics and electrical drive in China's University

Yang Geng,Huang Lipei,Xu Dehong,Zhou Honglin

DOI: https://doi.org/10.1109/IPEC.2010.5543202

2010-01-01

Abstract:This paper describes the educational states and recent changes of power electronics (PE) and electrical drive (ED) in China's universities. The factors which promote the progress of the PE and ED education recently are introduced, such as teaching programs and typical textbooks, R&D cooperation with companies and R&D institutes at the universities, and the government's educational projects and foundations. An example about the course reform on electrical machinery and drive in Tsinghua Univ. is explained. © 2010 IEEE.
Practice and Research of Explorative Experiment Teaching Methods in Electric Circuit Experiment Courses

Nie Man,Yao Yingying

DOI: https://doi.org/10.3969/j.issn.1672-7894.2013.13.038

2013-01-01

Abstract:Based on the problems existing in the traditional experiment teaching methods, this paper develops the steps of applying explorative experiment teaching method to electric circuit experiment course. The explorative experiment method can help establish research learning modes and task- oriented experiment methods, and actively improve the participation of student in experiments and the comprehensive ability of analyzing and solving problems.
Optimization of Teaching System for the Course of Process Control Engineering

Dai Liankui,Yu Ling

DOI: https://doi.org/10.3969/j.issn.1000-6168.2012.02.014

2012-01-01

Abstract:For the course,Process Control Engineering,this paper improves normal teaching objectives and teaching contents,and proposes an optimized teaching system to satisfy the requirement of modern process industries to control engineers.In addition to instruct basic control algorithms and control system analysis,control system designing and implementation are emphasized.Teaching practice in recent years has shown the integrality and effectiveness of the new teaching system,which has an obvious effect on training control engineers with strong innovation ability and engineering application techniques.
Teaching Content Selection and Teaching Method DesignBased on Working Process——Teaching Design of Common Machine Tool Machining Technology

Xiaoxi Wang

2009-01-01

Abstract:Considering the teaching design of Common machine tool machining technology,this paper described the key to the course teaching design of the systematization of working process.It is helpful to promote students' vocational ability and quality to select and organize proper teaching content,to design action-oriented teaching methods,and to complete and implement course tasks according to the accurate positioning of the course.
Reflection and Teaching Practice on the Course Content of Electrical and Electronic Engineering

Liping Pan

2012-01-01

Abstract:The paper proposes some thinking about the selection of the course content,the interrelations and managements on the related content such as electric technology and electronics technology,discrete circuits and integrated circuits,fundamental theories and engineering applications,unit circuits and integrated systems and so on.These ideas have been explored and practiced in the teaching process.It promotes the ability of knowledge apply for students.
Research and Practice on the Teaching of the Electric Machinery

LI Shu-quan,ZENG Ling-quan,WANG Xiu-yun

DOI: https://doi.org/10.3969/j.issn.1008-0686.2006.01.013

2006-01-01

Abstract:This paper studies the classroom teaching of The Electric Machinery.It aims at the main problems lying in the teaching of Electric Machinery course,such as theories of electric machinery being not integrated closely,the structure being downplayed to cause problem of students comprehending theory down,problem of course being not tied enough etc..Series of idea and action are formulized,such as grasping the internal relations of electric machinery basic theory,comprehending stronger structure of electric machinery,extruding engineering analysis method,comprehending deeply balance of magnetic motive force,and putting stress on the relations between Electric Machinery and its succeeding courses.After three years teaching reform and practice,teaching effects and quality have been improved.
Discussion of Electronic Technology Teaching Method Through Its First Class

Li Yin

2015-01-01

Abstract:Electronic Technology is a kind of curriculum that teaches students a lot of theory.The knowledge of this course is abstract and difficult to understand but the tertiary vocational students commonly have the disadvantage of their base knowledge and lack of interest and initiative of learn.The paper explains five teaching methods from the very beginning of the course,and presents some places that have to be modified in the future.
Discussion on Teaching Reform and Practice of “Electrotechnics”

Tao Yu,Yu Tian,Xinhua Zhu,Wenxing Shi

DOI: https://doi.org/10.18686/ahe.v5i8.3877

2021-01-01

Advances in Higher Education

Abstract:Through the reform of the teaching methods of electronic information undergraduate course “Electrotechnics”, the students’ theoretical knowledge level of electrotechnics and practical ability of electrical experiment skills are improved, so that students can truly experience the importance of experimental operation and practical application while learning knowledge. At the same time, we grasp the students’ learning attitude through the form of questionnaires, and summarizetimely in the daily teaching process. In order to realize the continuity between the knowledge of “Electrotechnics” course and the application of the knowledge learned by students, we introduce experimental teaching related to the knowledge learned and the specific examples closely related to daily life in the process of practical teaching, so that students can understand and apply the knowledge more intuitively, and improve the enthusiasm of students to learn “Electrotechnics” course.
Research On The Teaching Of "Power Market" Course For Different Levels Of Students

Chong Gao,Yu-Qing Wang,Kai Wang

2014-01-01

Abstract:In advance of a comprehensive reform of the power situation, cultivating the senior complex talents who have a good knowledge of both power technology and economic management has become the main content of Power Market course teaching reform. This paper discusses the construction of curriculum system of Power Market based on different levels of students in order to provide reference for the further improvement of the quality of teaching.
Experimental Teaching Reform of and Exploration into Power Electronics Technology

潘海鹏,雷美珍,夏永明,顾敏明

DOI: https://doi.org/10.3969/j.issn.1008-3634.2010.01.023

2010-01-01

Abstract:This paper explores the practice teaching method and content of the curriculum of Power Electronics Technology.EWB and MATLAB computer simulation software are introduced in order to build the simulation experiments,while increasing the open and designing experiments.Practice result shows that this method can not only improve students' ability of designing Power electronics circuit,but also cultivate the practical ability and innovative ability of students.

Discussion on Course Teaching of Power Electronic Technology

Interactive Experiment Teaching Method of Electrical Testing Technique Course

Textbook Construction and Teaching Reform of Electric Power Engineering

Enhancement on Experimental Teaching of Power Electronics and Electrical Machi Ne Control

Innovating practical teaching and improving teaching effects of power electronics technology basic course

Teaching Reforms and Practices on Electronic Circuit Experiment Courses

Preliminary Research on Teaching Methods of the Elective Course for Senior Student——From Reform of Teaching Method for the Course Introduction to Systems Engineering

Teaching design of "practice for electronic circuit setting and debugging"

Exploration and Reflections on Teaching Embedded System to Electronics Majors in Local Colleges

Study on Designing Experiment Teaching Supporting Electrical Equipment Course

A New Model of Electrical Basic Courses Teaching Oriented to Ability Enhancement

States on education of power electronics and electrical drive in China's University

Practice and Research of Explorative Experiment Teaching Methods in Electric Circuit Experiment Courses

Optimization of Teaching System for the Course of Process Control Engineering

Teaching Content Selection and Teaching Method DesignBased on Working Process——Teaching Design of Common Machine Tool Machining Technology

Reflection and Teaching Practice on the Course Content of Electrical and Electronic Engineering

Research and Practice on the Teaching of the Electric Machinery

Discussion of Electronic Technology Teaching Method Through Its First Class

Discussion on Teaching Reform and Practice of “Electrotechnics”

Research On The Teaching Of "Power Market" Course For Different Levels Of Students

Experimental Teaching Reform of and Exploration into Power Electronics Technology