Abstract:Abstract. The surveying and mapping administrative competent departments in 31 provinces (autonomous regions and municipalities) have built provincial-level satellite navigation and positioning reference stations and data centers, and provided CORS services. This provides a good condition for exploring the application of geological hazard monitoring and early warning using Virtual Reference Station (VRS) service based on CORS. At present, the layout mode of "one point one reference station" is usually adopted, when GNSS is used for geological disaster monitoring and early warning. However, the high deployment cost of this plan limits its largescale promotion and application. Using the existing CORS service resources of natural resource system, this paper carried out the application experiment of virtual reference station in geological hazard monitoring application at Huanglongya geological hazard monitoring site in Shaanxi Province, and assessed the virtual reference station data quality, comparative analyzed the precision of static baseline processing results and GNSS real-time deformation monitoring results. The experimental results show that the overall quality of virtual reference station data is better than that of the monitoring station, and the accuracy of the static baseline calculation results is better than 1.0cm in the X direction, and better than 2.0cm in the Y direction and Z direction, which is similar to the static baseline calculation results formed by the physical reference station. The accuracy of the baseline results of real-time observation data calculation is better than 5mm in horizontal RMS and 15mm in vertical RMS. Therefore, it can be seen that the virtual reference station is feasible to be used as the reference station for geological disaster monitoring. In addition, the application experiment of network RTK real-time dynamic single epoch positioning mode is also carried out in geological hazard monitoring. The experimental results show that the RMS values of all three directions are ±3.7mm, ±9.2mm and ±5.0mm respectively, which meet the precision requirements of GNSS disaster monitoring. Therefore, it is also a feasible scheme for geological disaster monitoring and early warning.

Application of Oblique Axis Gauss Projection in Geophysical Prospecting Long-Distance Profile Measurement

Projection Algorithm for Laser Three Dimensional Measurement

A Fast Interpretation Method of Gravity Gradiometry Data Based on Magnetic Dipole Localization

Spatially Discretised Compensation Method for Coordinate Transformation in Large-Scale Metrology under Nonuniform Temperature Field

Enhancing Regional Quasi-Geoid Refinement Precision: An Analytical Approach Employing ADS80 Tri-Linear Array Stereoscopic Imagery and GNSS Gravity-Potential Leveling

A Method for Calculating the Band Change of Gauss Projection Coordinates

GNSS Gravity Leveling

A revised orientation-based correction method for SfM-MVS point clouds of outcrops using ground control planes with marks

Gravity and Magnetic Data Inversion With Random Projection

A 3D Geological Modeling Method Based on Geophysical Data

Research on Rapid Surveying and Mapping of Outfield Absolute Gravity Based on Vehicle-Mounted Atomic Gravimeter

Inverse-Transformation of Gauss Projection in GIS Based on Floating Coordinate-system and Dynamic Iteration

The Determination of Plumb-Line Deviation by Adopting GNSS/ Leveling Method in Super Long Tunnel Break-Through Measurement

Accounting for Geometric Anisotropy in Sparse Magnetic Data Using a Modified Interpolation Algorithm

Airborne gravimetry data sparse reconstruction via L1-norm convex quadratic programming

FEASIBILITY VERIFICATION OF VIRTUAL REFERENCE STATION TECHNOLOGY IN GEOLOGICAL HAZARD MONITORING

Airborne Geophysical Data Levelling Based on Variational Mode Decomposition

Two-sided long baseline radargrammetry from ascending-descending orbits with application to mapping post-seismic topography in the west Sichuan foreland basin

Geometric Accuracy Improvement Method for High-Resolution Optical Satellite Remote Sensing Imagery Combining Multi-Temporal SAR Imagery and GLAS Data

Accuracy Analysis of Oblique Photogrammetry Measurement in 3D Modeling of Power Line Selection Design

Using airborne vector magnetic data to calculate the projection of the magnetic anomaly vector onto a normal geomagnetic field