Abstract:Using stereo synthetic aperture radar (SAR) to extract 3-D information has become an important means of continuously improving the spatial resolution and geometric positioning accuracy of spaceborne SAR. However, owing to the large differences in a stereo configuration, such as intersection angle (ITA), it is difficult to guarantee localisation accuracy. This study proposed a method for analysing the stereoscopic intersection capability and verifying the accuracy of spaceborne SAR images. The method is improved from three aspects. First, it considers the complexity of the OPSS and SASS modes and discusses the two cases separately in the theoretical modeling and experimental analysis. Secondly, in the theoretical modeling stage, the error is no longer simplified as originating from only one image, but all images have errors. Finally, the validity of the modeling conclusions is verified using multiple sets of simulated experiments and real SAR experiments. Experiments show that stereo SAR has more potential than single SAR. In the opposite-side stereo (OPSS) mode, the planimetric positioning accuracy of 35.028 m (single SAR) can be improved to 3.132 m (stereo SAR, optimal 1.641 m). By designing a reasonable stereo configuration, the geometric positioning accuracy of the original data can be significantly reduced by 31.896 m. In addition, the results show that, (1) for the symmetric OPSS mode, the planimetric accuracy can be improved, and an increase in the ITA will decrease the vertical accuracy. (2) For the same-side stereo (SASS) mode, the smaller the ITA, the higher the planimetric accuracy (except for a weak ITA). In addition, if the incidence angle (ICA) is fixed, an increase in the ITA increases the vertical accuracy. (3) The base-to-height ratio is not the only prerequisite for the stereo configuration. The recommended ITA value for symmetric OPSS mode is 52–80°, and the suggested ITA threshold for SASS mode is 10–21°. The theoretical results are generally compatible with the previous achievements, which can guide applications such as ground control point production, DSM generation, and 3-D information extraction.

A Precise Survey Method for Objects at a Distance Based on Stereo Panorama

A New Method for Increasing Accuracy of Distance Measurement Based on Single Visual Camera

A 360-Degree Panoramic Stereo Scanning Measurement System Based on a Panoramic Annular Lens and Omnidirectional Ring Structured Light

Design of an Enhanced Visual Odometry by Building and Matching Compressive Panoramic Landmarks Online

Design of Panoramic Stereo Imaging with Single Optical System

A Method of 3D-Gis Application Aided with Stereo Panorama Technology

Precision mapping through the stereo vision and geometric transformations in unknown environments

Measurable Panorama Construction Based on Binocular Spherical Projective Geometry

An accurate stereo vision system using cross-shaped target self-calibration method based on photogrammetry

High-precision calibration and measurement method based on stereo vision

Stereo Vision Based SLAM in Outdoor Environments

Distance Measurement In Panorama

Spaceborne SAR stereoscopic intersection capability analysis and accuracy verification

A study of high-precision stereo positioning with multi-scene and multi-mode GF-3 satellite images

A Three Dimensional Measurement Approach and Experiment Based on Spherical Panorama

Stereo vision reconstruction method based on common perpendicular constraint

Calibration method for stereo vision sensor based on spatial points

A Pose Measurement Method of a Non-Cooperative GEO Spacecraft Based on Stereo Vision

Study of Stereo Vision Coordinate Measurement System Based on Optical Probe

Optical-probe-imaging-based stereo cameras 3D coordinate measuring system

A Stable, Efficient, and High-Precision Non-Coplanar Calibration Method: Applied for Multi-Camera-Based Stereo Vision Measurements