Abstract:Elevated Arsenic and Chromium levels in surface and ground waters are a significant health concern in several parts of the world. Chitosan quinoxaline Schiff base (CsQ) and cross-linked chitosan quinoxaline Schiff base (CsQG) were prepared to adsorb both Arsenate [As(V)] and Chromium [Cr(VI)] ions. The thermo-gravimetric analysis (TGA), X-ray diffraction analysis (XRD), and Fourier-transform infrared spectroscopy (FTIR) were used to investigate the prepared Schiff bases (CsQ) and (CsQG). The UV–VIS spectra showed a shift in the wavelength area of the modified polymer, indicating the reaction occurrence, besides the variation of the shape and intensity of the peaks. The XRD patterns showed the incensement of the amorphous characteristic. On the other hand, the thermal stability of the modified polymers is better according to TGA studies; also, the morphology of the modified chitosan was investigated before and after crosslinking (CsQ and CsQG) using a scanning electron microscope (SEM) where the surface was fall of wrinkles and pores, which then were decreased after cross-linking. Contact time, temperature, pH, and initial metal ion concentration were all studied as factors influencing metal ion uptake behavior. The Langmuir, Temkin, Dubinin–Radushkevich, and Freundlich isotherm models were used to describe the equilibrium data using metal concentrations of 10–1000 mg/L at pH = 7 and 1 g of adsorbent. The pseudo-first-order and pseudo-second-order kinetic parameters were evaluated. The experimental data revealed that the adsorption kinetics follow the mechanism of the pseudo-second-order equation with R 2 values (0.9969, 0.9061) in case of using CsQ and R 2 values (0.9989, 0.9999) in case of using CsQG, demonstrating chemical sorption is the rate-limiting step of the adsorption mechanism. Comparing the adsorption efficiency of the synthesized Schiff base and the cross-linked one, it was found that CsQ is a better adsorbent than CsQG in both cases of As(V) and Cr(VI) removal. This means that cross-linking doesn't enhance the efficiency as expected, but on the contrary, in some cases, it decreases the removal. In addition, the newly modified chitosan polymers work better in As(V) removal than Cr(VI); the removal is 22.33% for Cr(VI) and 98.36% for As(V) using CsQ polymer, whereas using CsQG, the values are 6.20% and 91.75% respectively. On the other hand, the maximum adsorption capacity (Qm) for As(V) and Cr(VI) are 8.811 and 3.003 mg/g, respectively, using CsQ, while in the case of using CsQG, the Qm value reaches 31.95 mg/g for As(V), and 103.09 mg/g for Cr(VI).

Adsorption of Cr(Ⅵ) to Prepared Chitosan Ramifications

Study on the Adsorption Efficiency of CHCl3 ＆ CHBrCl2 on Chitosan-activated Carbon Sorbent

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Influence of Crosslinking Agent Content on Structure and Properties of Glutaraldehyde Crosslinked Chitosan Membranes

Preparation of Chitin with Different Degrees of Deacetylation from Crab Shells Waste and Its Application in the Removal of Congo Red

Preparation, Characterization, Adsorption Kinetics and Thermodynamics of Chitosan Adsorbent Grafted with a Hyperbranched Polymer Designed for Cr(VI) Removal

Adsorptive Removal of Cr(VI) from Aqueous Solutions with an Effective Adsorbent: Cross-Linked Chitosan/montmorillonite Nanocomposites in the Presence of Hydroxy-Aluminum Oligomeric Cations.

Removal of As(V) and Cr(VI) using quinoxaline chitosan schiff base: synthesis, characterization and adsorption mechanism

Superadsorption of LiOH Solution on Chitosan As a New Type of Solvent for Chitosan by Freezing/blasting

Preparation and structure of chitosan soluble in wide pH range

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres.

A Comparative Study of Removal of Acid Red 27 by Adsorption on Four Different Chitosan Morphologies

Preparation of Aminated Cross-Linked Chitosan Beads for Efficient Adsorption of Hexavalent Chromium.

Super Absorption Behavior of Chitosan by Freeze-Blasting in Different Alkaline Solvents

Synthesis of Amino-protected Chitosan by Tripolyphosphate and Epichlorohydrin Modification: Cr(VI) Adsorption and Reaction Mechanism

Adsorption of Cr(III) from an Aqueous Solution by Chitosan Beads Modified with Sodium Dodecyl Sulfate (SDS)

Study on adsorption of azo dye Acid Red B onto cross-linked chitosan

Removal of Chromium(VI) by Chitosan Beads Modified with Sodium Dodecyl Sulfate (SDS)

Enhanced Adsorption of Congo Red Using Chitin Suspension after Sonoenzymolysis.

Preparation of Modified Chitosan Microspheres and their Anionic Dye Adsorption Behaviors

Effective Adsorption of Cr(VI) by High Strength Chitosan/Montmorillonite Composite Hydrogels Involving Spirulina Biomass/Microalgae